SNI OF RETENTION TANK

Special Eligibility Criteria

1. 1

   None being SLT

   Document optionalConfirmation required
2. 2

   As per Public procurement (Preference to Make in India) order 2017, as amended, tendered item is to be procured from Class-I Local Suppliers only and the vendors who do not qualify to be Class-I Local Suppliers should not quote in the tender as their offers shall not be considered for any ordering.

   Document optionalConfirmation required

Check List

1. 1

   In case of indigenous bidders, whether you are Large scale Industry or consortia of MSEs formed by NSIC, if yes, have you indicated quantum of sub contracts given to Micro and Small Enterprises (in percent of order value)?
2. 2

   Have you confirmed for compliance of Public Procurement orders of Department of Expenditure regarding countries sharing land border with India?
3. 3

   Have you furnished the statement of Equipment & Quality Control?
4. 4

   Have you furnished tender specific letter of authority (if manufacturer has not quoted directly) to bid on behalf of manufacturer as per Annexure-II of ICF bid document.
5. 5

   Have you kept your offer valid for the validity period as mentioned in NIT header?
6. 6

   Have you submitted the details of location(s) at which local value addition is made/proposed?
7. 7

   Have you submitted self-declaration with respect to non-debarment under any provisions of DPIIT rules?
8. 8

   Have you submitted translated copy into English, for all documents in language other than English and all such documents should be signed by the authorised translator and notarized in India?
9. 9

   Have you submitted declaration for passing on the input tax credit as per para 2.8 and 2.9 of section-II of ICF Bid Document.
10. 10

    Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers?
11. 11

    Special Conditions: For PL No. 33615718 1. INSTALLATION & COMMISSIONING REQUIRED AS PER ASSEMBLY DRAWING & ANNEXURE-A TO BE FOLLOWED. 2. SUPPLY RATES & INSTALLATION RATES TO BE QUOTED SEPARATELY. 3. WHERE EVER CDE/RCF APPEARS IN THE SPECIFICATION IT SHOULD BE READ AS CDE/ICF. 4. ITEM SHALL BE OFFERED FOR PROTOTYPE INSPECTION BY DESIGN DEPARTMENT OF ICF BEFORE TAKING UP BULK MANUFACTURE. TO TAKE CARE OF CUSTOMER AND MAINTENANCE REQUIREMENTS, MINOR DESIGN CHANGES WHILE MANUFACTURING AND DURING FITMENT MAY BE THERE WHICH WILL HAVE TO BE ACCOMMODATED. SUPPLIER HAS TO INCORPORATE THESE CHANGES WITHOUT ADDITIONAL COST. THESE CHANGES SHALL BE IMPLEMENTED WITH THE APPROVAL OF DESIGN/ICF DURING BULK SUPPLY. 5. PACKING CONDITION AS PER RCF PACKING CONDITION PI100, VER.1.0 6.FIRM HAS TO FOLLOW ATTACHED SPECIAL CONDITION FOR S & I CONTRACT. 7.PERMISSIBLE TIME FOR COMPLETION OF S & I OF BIO TANK & APPLICABLE PENALTIES SHALL BE AS PER ICF/F/IMS/FM/30/S & I 33615718. 8.SPECIAL CONDITION IMPLEMENTATION PROCEDURE SHALL BE AS PER ANNEXURE-I AND STANDARD MONITARING FORMAT SHALL BE AS PER ANNEXURE-II. 9.FIRM SHALL SUBMIT THE UNDERTAKING FOR S & I CONTRACT AS PER ENCLOSED FORMAT. For Pl No. 31630110 1)INSTALLATION IS REQUIRED AS PER ASSEMBLY DRAWING AND ANNEXURE -A TO BE FOLLOWED. 2)SUPPLY RATES AND INSTALLATION RATES TO BE QUOTED SEPARATELY. 3)ITEM SHALL BE OFFERED FOR PROTO TYPE INSPECTION BY DESIGN DEPARTMENT OF ICF BEFORE TAKING UP BULK MANUFACTURE. TO TAKE CARE OF CUSTOMER AND MAINTENANCE REQUIREMENTS, MINOR DESIGN CHANGES WHILE MANUFACTURING AND DURING FITMENT MAY BE THERE WHICH WILL HAVE TO BE ACCOMMODATED. SUPPLIER HAS TO INCORPORATE THESE CHANGES WITHOUT ADDITIONAL COST. THESE CHANGES SHALL BE IMPLEMENTED WITH THE APPROVAL OF DESIGN/ICF DURING BULK SUPPLY. 4)PACKING CONDITION SHALL BE AS PER DOC NO PC-040 OF ICF/MD/SPEC-485. 5)FIRM HAS TO FOLLOW ATTACHED SPECIAL CONDITION FOR S & I CONTRACT. 6)SPECIAL CONDITION IMPLEMENTATION PROCEDURE SHALL BE AS PER ANNEXURE-I AND

STANDARD MONITORING FORMAT SHALL BE AS PER ANNEXURE-II. 7)FIRM SHALL SUBMIT THE UNDERTAKING FOR S & I CONTRACT AS PER ENCLOSED FORMAT. Commercial-Compliance

1. 1

   Public Procurement (Preference to Make in India) policy is applicable as per Clause 16 of Section-I of ICF Bid Document. The procurement shall be done in accordance with the extant instruction of DPIIT (Department of Promotion of Industry and Internal Trade) for Make in India policy.

   Document optionalConfirmation required
2. 2

   EARNEST MONEY DEPOSIT (EMD): - None being SLT

   Document optionalConfirmation required
3. 3

   (i) In case of MSE firm willing to claim the benefits under Public Procurement Policy (Preference to MSE) order 2012, the firm should upload with their offer, the proof of their being MSE registered with the agency mentioned in clause 13.1 of section-I of ICF Bid document, failing which such offers will not be liable for consideration of benefits detailed in para 13.3 of section-I of ICF Bid document. (ii) As per Gazette notification no. S.O.4926(E) dated 18.10.2022 amending notification no. S.O.2119(E) dated 26.06.2020 circulated vide Railway Board letter no. 2020/RS(G)/363/1 dated 03.11.2022 regarding re- classification of enterprises and Udyam registration, In case of an upward change in terms of plant and machinery or equipment or turnover or both, and consequent reclassification, an enterprise shall continue to avail of all non-tax benefits of the category it was in before the re-classification, for a period of three years from the date of such upward change. In such cases, the tenderer claiming such benefits shall submit necessary documentary evidence along with offer. (iii) Tenderers shall upload Udyam Registration detail showing that the enterprise is owned by Scheduled Castes (SC)/ Scheduled Tribes (ST)/ women entrepreneurs to claim the benefit under this sub classification.

   Document optionalConfirmation required
4. 4

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document.

   Document requiredConfirmation required
5. 5

   Goods & Services Tax (GST): Will be applicable as per Clause 2.0 and all sub clauses of Section-II of ICF Bid Document.

   Confirmation required
6. 6

   Passing the benefits of ITC:

   Confirmation required

7. I hereby confirm following: We hereby declare that in quoting the above price, we have taken into account the full effect of Input Tax Credit available under GST. We, further agree to pass on any financial gain/benefit as may become available in future in respect of all the input tax credit on the date of supply by way of reduction in price and advise the purchaser accordingly. We also undertake that we are aware of the provisions of section 171 of the CGST Act and consequences thereof if we fail to comply with the same.

8. 7

   This tender is for Supply & Installation. Firm should quote Supply rates & Installation rates separately.

   Confirmation required
9. 8

   It will be presumed that the firms who have submitted the e-bid have gone through and accepted all the terms and conditions of tender, until and unless firms specify the deviations from those conditions and so indicated specifically, under the headings - Technical Deviation Statement and Commercial Deviation Statements. And if space available is not adequate, tenderers can upload a Statement of Deviations and a reference of uploaded deviation statement shall be given in Technical or Commercial Deviation Statement. If there is any contradiction between any techno commercial terms and conditions quoted in e-offer and documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail over that of quoted in attached documents. Tenderers in their own interest are advised not to quote any techno commercial terms & conditions in attached documents.

   Confirmation required
10. 9

    Please submit the details of the location at which the local value addition is being made

    Document requiredConfirmation required
11. 10

    IT IS CERTIFIED THAT THE ITEM OFFERED MEETS THE LOCAL CONTENT REQUIREMENT FOR CLASS- I LOCAL SUPPLIER.

    Document optionalConfirmation required
12. 11

    The tenderers shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email id) for GST.

    Document optionalConfirmation required
13. 12

    PRICE VARIATION CLAUSE APPLICABLE AS PER ATTACHED DOCUMENT

    Confirmation required
14. 13

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the NIT header of this tender document is permitted. For additional conditions please refer Clause 12.0 of Section -I of ICF Bid Document.

2. 2

   Price Variation Clause: Applicable as per Tender document or annexure attached. Please refer Clause 1.3 of Section -II of ICF Bid Document. No deviation from the Price Variation Clause as stipulated in this Tender document or annexure to the tender document is permitted.