Loading…
Loading…
Tender Value
₹3 L
EMD Value
₹3,000
Closing Date
11 Jun 2026, 3:00 pm6d left
COMMISSIONER.THIRUTHURAIPOONDI MUNICIPALITY
MUNICIPAL OFFICE THIRUTHURAIPOONDI
Repair And Maintenance of Amma Unavagam and procurement of kitchen equipment in GH Premises Ward No.19 Thiruthuraipoondi Municipality
2026_MAWS_678544_1
999/2026/E1
Open Tender
Civil Works
THIRUTHURAIPOONDI MUNICIPALITY
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹3,000
27 May 2026
27 May 2026
11 Jun 2026
27 May 2026
11 Jun 2026
27 May 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: Commissioner, Thiruthuraipoondi Municipality General Fund 2026-27
Name of Work:Repair And Maintenance of Amma Unavagam and procurement of kitchen equipment in GH Premises Ward No.19 Thiruthuraipoondi Municipality
Contract No: Estimate Amount:Rs.3.00 lakhs
Name of the Bidder/ Bidding Firm / Company :
Sl. No. Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category
1.01 Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). 13.84 m3 Excess(+) Full Conversion INR
1.02 Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means 2 m3 Excess(+) Full Conversion INR
1.03 Brick work in following Cement Mortar 1:5 (one cement five m-sand)using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge. 0.87 m3 Excess(+) Full Conversion INR
1.04 Special ceiling plastering Cement Mortar 1:3 and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers 19.45 m2 Excess(+) Full Conversion INR
1.05 Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. 3.78 m2 Excess(+) Full Conversion INR
1.06 Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. Solid panel PVC door with frame M-0391 3.36 m2 Excess(+) Full Conversion INR
1.07 Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) 8 Nos Excess(+) Full Conversion INR
1.08 Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996including loading,unloading,transportation and labour charges forfixing of the GI pipes and specials for pipe connection works includingcutting, threading and fixing charges etc. WD-W1418 1 Nos Excess(+) Full Conversion INR
1.09 White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. 23.23 m2 Excess(+) Full Conversion INR
1.1 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers. 23.23 sq.m Excess(+) Full Conversion INR
1.11 supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18") PWD ELECTRICAL DATA SD 475 6 Nos Excess(+) Full Conversion INR
1.12 Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting PWD ELECTRICAL DATA SD 440 8 Nos Excess(+) Full Conversion INR
1.13 Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters. at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf of size 1.00m x 2.10m. 7.35 sq.m Excess(+) Full Conversion INR
1.14 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 7.35 m2 Excess(+) Full Conversion INR
1.15 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply Above ground level. 20 RM Excess(+) Full Conversion INR
1.16 Stainless Steel Sink M-0552 (PWD SOR 2025-26 pg no.98) 2 Nos Excess(+) Full Conversion INR
1.17 Supply and Fixing Amma unavagam Name Board 1.62 sq.m Excess(+) Full Conversion INR
1.18 Supply and Fixing of Price list Board 1.35 sq.m Excess(+) Full Conversion INR
1.19 Supply and Delivery of Kitchen utensils 15 Kg Stainless Steel Dabara 2 Nos Excess(+) Full Conversion INR
1.2 10 Kg Stainless Steel Dabara 2 Nos Excess(+) Full Conversion INR
1.21 15 Kg Stainless Steel Dabara Cover 2 Nos Excess(+) Full Conversion INR
1.22 10 Kg Stainless Steel Dabara Cover 2 Nos Excess(+) Full Conversion INR
1.23 60 Nos IdlyPanai 1 Nos Excess(+) Full Conversion INR
1.24 Big Saandi 2 Nos Excess(+) Full Conversion INR
1.25 Saandi 2 Nos Excess(+) Full Conversion INR
1.26 Small Sarani 2 Nos Excess(+) Full Conversion INR
1.27 Kulikarandi 4 Nos Excess(+) Full Conversion INR
1.28 Annavetti 2 Nos Excess(+) Full Conversion INR
1.29 Stainless Steel Plates 50 Nos Excess(+) Full Conversion INR
1.3 Tumbler 50 Nos Excess(+) Full Conversion INR
1.31 mixer grinder 1 Nos Excess(+) Full Conversion INR
1.32 Vegetable Cutting Blade 1 Nos Excess(+) Full Conversion INR
1.33 Grinder 1 Nos Excess(+) Full Conversion INR
1.34 Stainless Steel Utensil 4 Nos Excess(+) Full Conversion INR
1.35 Thambalam 2 Nos Excess(+) Full Conversion INR
1.36 Bucket 2 Nos Excess(+) Full Conversion INR
1.37 Kudam 4 Nos Excess(+) Full Conversion INR
1.38 AnnaKudai 4 Nos Excess(+) Full Conversion INR
1.39 Stainless Steel Kuvalai 2 Nos Excess(+) Full Conversion INR
1.4 Stainless Steel cup 4 Nos Excess(+) Full Conversion INR
1.41 Aruvamanai 2 Nos Excess(+) Full Conversion INR
1.42 Muram 1 Nos Excess(+) Full Conversion INR
1.43 Kuvalai Cover 2 Nos Excess(+) Full Conversion INR
1.44 Big Paanai 2 Nos Excess(+) Full Conversion INR
1.45 Small Paanai 2 Nos Excess(+) Full Conversion INR
1.46 Mudi Vaali 2 Nos Excess(+) Full Conversion INR
1.47 Bucket Vaali 4 Nos Excess(+) Full Conversion INR
1.48 Supply and Delivery of Refrigerator 1 Nos Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_815221.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid