8125/SAR-T-63/2025-26 REPAIR AND MAINT OF WOODEN/STEEL FURNITURE FOR OFFICERS/JCOs/ORS FOR MD/OTM ACCN AT AF STN SARSAWA AND REPAIR, POLISHING TO WOODEN/STEEL FURNITURE AND CONNECTED ITEMS AT 1AFSB DEHRADUN UNDER GE(AF) SARSAWA

Amount

Removing old unserviceable Top of Table Dining 6 persons and S&F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref -FD-273

Removing old unserviceable Leg of Table Dining 6 persons and S&F new Leg made from first class teak wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref -FD-273

All as per Item No 2.00 here-in-above but for Top rail long.

All as per Item No 2.00 here-in-above but for Top rail small.

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat of french polish to entire surface to table dinning 6 persons complete all as specified and directed. Ref -FD-273

Removing old unserviceable Top of Table Dining 8 persons and S&F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref -FD-273

Removing old unserviceable Leg of Table Dining 8 persons and S&F new Leg made from first class teak wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref -FD-273

All as per Item No 7.00 here-in-above but for Top rail long.

All as per Item No 7.00 here-in-above but for Top rail small.

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat french polish to entire surface to table dinning 8 persons complete all as specified and directed by Engineer-in-Charge. Ref -FD-273

Removing old unserviceable Top of Table Dining 4 persons (1200x900mm) and S&F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD/MAP-II/03

Removing old unserviceable Leg of able Dining 4 persons (1200x900mm) and S&F new Leg made from first class teak wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref-FD/MAP-II/03

All as per Item No 12.00 here-in-above but for Top rail long.

All as per Item No 12.00 here-in-above but for Top rail small.

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat french polish to entire surface to able Dining 4 persons (1200x900mm) complete all as specified and directed by Engineer-in-Charge. Ref-FD/MAP-II/03

Removing old unserviceable Top of Table 900x600mm with/without drawer and S&F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-283, 284

Removing old unserviceable Leg of Table 900x600mm with/without drawer and S&F new Leg made from first class teak wood without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-283, 284

All as per Item No 17.00 here-in-above but for Top rail long.

All as per Item No 17.00 here-in-above but for Top rail small.

Removing old unserviceable PVC rings of Table 900x600mm with/without drawer and S&F new PVC rings fixed with screw. of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-283, 284

Removing old unserviceable drawer of Table 900x600mm with drawer and S&F new drawer made from plywood and particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-283, 284

All as per Item No 21.00 but for Stiffner.

M&L for polishing 2 coat to new part and scraping complete for old surface and applying 01 coat french polish to entire surface to Table 900x600mm with/without drawer complete all as specified and directed by Engineer-in-Charge. Ref- FD-283, 284

Removing old unserviceable top of Peg Table and S & F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-277

Removing old unserviceable Leg of Peg Table and S&F new leg made from first class teak wood without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-277

All as per Item No 25.00 here-in-above but for Top rail long.

All as per Item No 25.00 here-in-above but for Top rail small.

Removing old unserviceable PVC rings of Peg Table and S & F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-277

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat french polish to entire surface of Peg table complete all as specified and directed by Engineer-in-Charge. Ref- FD-277

Removing old unserviceable top of Table Writing and S & F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-275

Removing old unserviceable Leg of Table writing and S & F new leg made from first class teak wood without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-275

All as per Item No 31.00 here-in-above but for Top rail long.

All as per Item No 31.00 here-in-above but for Top rail small.

Removing old unserviceable drawer of Table writing and S & F new drawer made from plywood and particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-275

All as per Item No 31.00 here-in-above but for Stiffner Long.

All as per Item No 31.00 here-in-above but for Stiffner small.

Removing old unserviceable Door panel of Table writing and S&F new door panel complete as per drg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-275

Removing old unserviceable PVC rings of Table Writing and S & F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-275

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat french polish to entire surface to table writing complete all as specified and directed by Engineer-in-Charge. Ref- FD-275

Removing old unserviceable Drawer of Table Dressing Ladies and S & F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-251

Removing old unserviceable Looking mirror of Table Dressing Ladies and S&F new Looking mirror complete with frame and back rails complete made of teak wood duly fixed with clamp for hanging of table dressing ladies complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-251

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat french polish to entire surface Table Dressing Ladies complete all as specified and directed by Engineer-in-Charge. Ref- FD-251

Removing old unserviceable Drawer of Table Dressing Gents and S & F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-230

Removing old unserviceable Looking mirror of Table Dressing Gents and S & F new Looking mirror complete with frame teak wood duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-230

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat of french polish to entire surface table dresing gents complete all as specified and directed by Enginer-in-Charge. Ref- FD-230

Removing old unserviceable Top of Table Centre/Table centre 2 tier and S & F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-235, 274

Removing old unserviceable Leg of Table centre/Table centre 2 tier and S&F new Leg made from first class teak wood without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-235, 274

All as per Item No 47.00 here-in-above but for Top rail long.

All as per Item No 47.00 here-in-above but for Top rail small.

Removing old unserviceable PVC rings of Table Centre and S & F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-235, 274

M & L for polishing two coats to new part and scraping complete for old surface and each applying one coat french polish to entire surface to table centre complete all as specified and directed by Engineer-in-Charge. Ref- FD-235, 274

Removing old unserviceable Plywood of Bed Hard and S & F new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded commercial plywood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-246, 247

Removing old unserviceable Head board of Bed Hard and S & F new Head board complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-246, 247

Removing old unserviceable Foot board of Bed Hard and S & F new Foot board complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-246, 247

Removing old unserviceable Long rail of Bed Hard and S & F new Long rail made of first class teak wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-246, 247

Removing old unserviceable Support rail of Bed Hard and S & F new Support rail made of first class teak wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-246, 247

Removing old unserviceable MS bracket of Bed Hard and S&F new MS bracket 150x35x5mm thick Flat iron "L"shape duly treated with black japan paint. of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-246, 247

M & L for polishing two coats to new part and one coat to entire surface to bed hard complete all as specified and directed by Engineer-in-Charge. Ref- FD-246, 247

Removing old unserviceable hand rest left/right of sofa set 3 seater and supply and fixing new hand rest made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable long rail front of sofa set 3 seater and supply and fixing new long rail front made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable side rail of sofa set 3 seater and supply and fixing new side rail made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable wooden batten of sofa set 3 seater and supply and fixing new wooden battens made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

M & L for polishing two coats to new part and one coat to entire surface to Sofa set 3 seater complete all as specified and directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable hand rest left/right of sofa set single seater and supply and fixing new hand rest made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable long rail front of sofa set single seater and supply and fixing new long rail front made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable side rail of sofa set single seater and supply and fixing new side rail made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable wooden batten of sofa set single seater and supply and fixing new wooden battens made of 1st class hard wood teak wood made to shape as shown on drawing complete. All as shown on drg and as directed by Engineer-in-Charge. Ref- FD-281, 373

M & L for polishing two coats to new part and one coat to entire surface to Sofa set single seater complete all as specified and directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable PVC rings of Sofa set three/single seater and S & F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-281, 373

Removing old unserviceable foam cushion from sofa set and supply and fixing new cushion of size 558mmx533mmx 100mm thick 40 density of Make : Sleep well / Sweet Dream/ Kurl-on duly covered with tapestry cloth of approved quality costing not less than Rs. 210/- per metre complete all as specified and directed. Ref drawing No. FD-281, 373 Note : Contractor shall bring the tapestry cloth to furniture yard. Covering to the foam cushion with tapestry cloth shall be carried out in the furniture yard of GE (AF) Sarsawa.

Removing old unserviceable cover from cushion of sofa set and supply and fixing new cover made of tapestry cloth of approved quality costing not less than Rs 210/- per metre for cushion of size 558mmx533mmx 100mm thick incl providing nylon zip of suitable specification for opening and closing of cover, tapestry cloth at zip overlaped by 15mm to hide the zip complete all as specified and directed. Ref drawing No. FD-281, 373 Note : Contractor shall bring the tapestry cloth to furniture yard. Covering to the foam cushion with tapestry cloth shall be carried out in the furniture yard of GE (AF) Sarsawa.

Removing old UNSV foam cushion from Chair Dining (MAP) and supply & fixing new cushion 75mm thick urethane foam with 32 density duly covered with acrylic fabric cloth/ tapestrey cloth (as per requirement) of approved quality costing not less than Rs. 210/- per metre complete all as specified and directed. Ref drg No- FD/MAP-II/04

M & L for polishing two coats to new part and one coat to entire surface to Chair dining cushioned complete all as specified and directed by Engineer-in-Charge. Ref drg No- FD/MAP-II/04

Removing old unserviceable Top of Teapoy and S & F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-278

Removing old unserviceable leg of Teapoy and S&F new leg made from first class teak wood without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-278

All as per Item No 75.00 here-in-above but for Top rail long.

All as per Item No 75.00 here-in-above but for Top rail small.

Removing old unserviceable PVC rings of Teapoy and S & F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-278

M & L for polishing two coats to new part and one coat to entire surface of teapoy complete all as specified and directed by Engineer-in-Charge. Ref- FD-278

M & L for repairing chair dining/Chir wooden bottom by replacing Front leg made of first class teak wood and properly tightening of seat frame complete all as specified and directed by Engineer-in-Charge. Ref- FD-279 Note: PVC rings will be measured separately.

All as per Item No 80.00 here-in-above but for Rear leg. (PVC rings will be measured separately).

All as per Item No 80.00 here-in-above but for Side rail with caning holes for seat frame.

All as per Item No 80.00 here-in-above but for Front rail with caning holes for seat frame.

All as per Item No 80.00 here-in-above but for rear rail with caning holes for seat frame.

All as per Item No 80.00 here-in-above but for stiffiner.

M & L repairing chair dining/Chair wooden bottom by replacing PVC Shoes (best quality) white with screw and washer complete all as specified and directed by Engineer-in-Charge. Ref- FD-279

M & L for polishing two coats to new part and one coat to entire surface french polish complete to chair dining/Chair wooden bottom complete all as specified and directed by Engineer-in-Charge. Ref- FD-279

Repairing of chair writing by replacing Front leg made of first class teak wood and properly tightening of seat frame duly polished with French Polish complete all as specified and directed by Engineer-in-Charge. Ref- FD-280 Note: PVC rings will be measured separately.

All as per Item No 88.00 here-in-above but for Rear leg. (PVC rings will be measured separately).

All as per Item No 88.00 here-in-above but for Side rail with caning holes for seat frame.

All as per Item No 88.00 here-in-above but for Front rail with caning holes for seat frame.

All as per Item No 88.00 here-in-above but for rear rail with caning holes for seat frame.

All as per Item No 88.00 here-in-above but for stiffiner.

All as per Item No 88.00 here-in-above but for Arms.

Repairing of chair writing by replacing PVC Shoes (best quality) white with screw and washer complete all as specified and directed by Engineer-in-Charge. Ref- FD-280

M & L for polishing twos coats to new part and one coat to entire surface french polish to chair writing complete all as specified and directed by Engineer-in-Charge. Ref- FD-280

Repairing of chair easy by replacing Leg rear/front made of first class teak wood and properly tightening of seat frame duly polished with French polish Complete all as Specified and directed by Engr-in-Charge. Ref- FD-229 Note: PVC rings will be measured separately.

All as per Item No 97.00 here-in-above but for Side rail of Seat frame/back frame with holes for canning.

All as per Item No 97.00 here-in-above but for Front rail of Seat frame/back frame with holes for canning.

All as per Item No 97.00 here-in-above but for Rear rail of Seat frame/back frame with holes for canning.

All as per Item No 97.00 here-in-abve but for Arms.

Repairing of chair easy by replacing PVC Shoes (best quality) whitewith screw and washer complete all as specified and directed by Engineer-in-Charge. Ref- FD-229

M & L for polishing two coats to new part and one coat to entire surface french polish to chair easy complete all as specified and directed by Engineer-in-Charge. Ref- FD-229

Removing Old unserviceable Cane From Chair dinning and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work complete all as specified and directed by Engr-in-Charge. Ref- FD-229

All as per Item 104.00 here-in-above but for chair writing.

All as per Item 104.00 here-in-above but Chair easy (Seat & Back).

Removing of old unsv Sides /Top/Bottom S&F new Sides /Top/Bottom of 18-19 mm thick particle board interior grade with 4 mm thick Teakwood Beading shall be fixed whereever required all as per Drg. Ref- FD-248, 276

Removing of old unsv shelf S&F new shelf of 18-19 mm thick particle board interior grade with 4 mm thick Teakwood Beading shall be fixed whereever required all as per Drg. Ref- FD-248, 276

Removing of old unsv back ply and S&F new back ply 06 mm both side commercial as approved as directed. Ref- FD-248, 276

Removing old unserviceable Table top of Table Office Officer steel and S&F new Table top made of 18 mm thick Prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref-FD-84(M), FD-1003

Removing old unserviceable box incl unsv drawers from Table office Offrs and supply and fixing new box with 3 drawers made of 20 gauge MS sheet with lock in 1 drawer, PVC recessed handles including painting complete all as shown on drawing FD-84(m), 1004, 1003 etc and as directed by Engineer-in-Charge.

Removing old unserviceable Hard PVC shoe of Table Office Officer steel and S&F new Hard PVC shoe superior quality of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. FD-84(M), FD-1003

Removing old unserviceable Locks from drawer of Table office officer steel and S&F new Lock brass as required including incl size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD-84(M), FD-1003

Removing old unserviceable table top of Table Office clerk steel and S&F new table top made of 18 mm thick Prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-84(M), FD-1004

Removing old unserviceable box incl unsv drawers from Table office Clk and supply and fixing new box with 3 drawers made of 20 gauge MS sheet with lock in 1 drawer, PVC recessed handles including painting complete all as shown on drawing FD-84(m), 1004, 1003 etc and as directed by Engineer-in-Charge.

Removing old unserviceable Hard PVC shoe of Table Office clerk steel and S&F new Hard PVC shoe superior quality of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-84(M), FD-1004

Removing old unserviceable Locks from drawer of Table office clerk steel and S&F new Lock brass as required including incl size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD-84(M), FD-1004

Removing old unserviceable top of Table 900x600mm steel with/without drawers and S&F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref- FD-1008, FD-1007

Removing old unserviceable drawer of Table 900x600mm steel with drawers and S&F new drawer complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref -Ref- FD-1008, FD-1007

Removing old unserviceable Hard rubber shoe of Table 900x600mm steel with/without drawers and S&F new Hard rubber shoe superior quality of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref -FD-1008, FD-1007

Removing old unserviceable Top from Teapoy Verandah and supply and fix new Top made of prelaminated particle board interior grade of existing size, shape, pattern complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-255(M)

Removing old unserviceable Hard PVC shoes from Teapoy Verandah and supply and fix new Hard PVC shoes superior quality of existing size, shape, pattern complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-255(M)

Removing old unserviceable Leg of Almirah Medium steel and S&F new Leg made of 1 mm MS sheet duly painted with two coat of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1032

Removing old unserviceable shelf of Almirah Medium steel and S&F new shelf made of 1 mm MS sheet duly painted with two coat of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1032

Removing old unserviceable CP Handle of Almirah Medium steel and S & F new CP Handle (Superior Quality) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1032

Removing old unserviceable Locks of Almirah Medium steel and S&F new Lock brass 65/75mm as required including necessary repair to locking mechanism of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1032

Removing old unserviceable Leg of Almirah Large steel and S&F new Leg made of 1 mm MS sheet duly painted with two coat of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1031/MAP

Removing old unserviceable CP Handle of Almirah Large steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1031/MAP

Removing old unserviceable shelf of Almirah Large steel and S&F new shelf made of 1 mm MS sheet duly painted with two coat of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1031/MAP

Removing old unserviceable Lock of Almirah Large steel and S&F new Lock MS 65/75mm with brass lever as required including necessary repair to locking mechanism of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1031/MAP

Removing old unserviceable MS legs of Locker bed side steel and S&F new legs made out of 1.00mm thick MS sheet duly painted with two coat of synthetic enamel paint over one coat primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1029

Removing old unserviceable MS hasp and staple of Locker bed side steel and S&F new MS hasp and staple 75 mm long of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1029

Replacement of seat for chair tubular steel with arms/without Arms made of 2nd class hard wood duly canned with plastic cane 2mm wide with black paint finish fixed with nut, bolts and washer complete all as Specified and shown on drg and directed by Engineer-in-Charge. Ref FD-75 (M)

All as per Item No 133.00 here-in-above but for back. Ref FD-75 (M).

Removing old unserviceable Arms of Chair tubular steel with arms and S&F new Arms made from 2nd class hard wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-75 (M)

Removing old unserviceable Hard PVC shoe from chair tubular steel with arms/without Arms and supply and fix new Hard PVC shoe superior quality of existing size, shape, pattern complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-75(M)

Removing old unserviceable cane from Chair Verandah and M&L for re-canning seat & back of chair verandah with 1st class plastice cane 4.0 to 5.0 mm wide white colour and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and directed by Engr-in-Charge. Ref. FD-359

M & L for PVC Shoes (best quality) white for all type of chair verandah complete all as specified and directed. Ref. FD-359

Removing old unserviceable Writing pad (Handboard) from Chair School with handboard and S&F new Handboard made of 18 mm thick Prelaminated particle board with teakwood beading of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref-FD/E6/MAP/05

Removing old unserviceable one pieace PVC Seat & back from Chair School with handboard and S&F new one pieace PVC Seat & back of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref-FD/E6/MAP/05

Removing old unserviceable Hard PVC shoe from Chair School with handboard and supply and fix new Hard PVC shoe superior quality of existing size, shape, pattern complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD/E6/MAP/05

Removing old unserviceable Top of Table 900x900mm steel and S&F new Top made of prelaminated particle board interior grade of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref-FD-1009

Removing old unserviceable Hard rubber shoe of Table 900x900mm steel and S&F new Hard rubber shoe superior qualityof existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-1009

Removing of old and unsv Ply top from Hard Bed and S&F new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded commercial plywood with suitable size nut and bolts all as shown on drawing and as directed. Ref- FD/E6/MAP/08 (R)

Removing of old unsv particle board from Head /Foot board of hard bed and S&F new Head /Foot board made from 18 mm thick pre laminated particle board interior Grade Type with suitable size screw all around side of board shall be covered with 1mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed. Ref- FD/E6/MAP/08 (R)

M& L for welding to broken joints of Hard Bed complete all as specified and directed. Ref- FD/E6/MAP/08 (R)

Removing of old unsv Rubber Shoes of bed Hard and S & F new Hard Rubber Shoes as per sample approved rest all as directed. Ref- FD/E6/MAP/08 (R)

Removing of old and unsv ply top of Charpoi IP and S&F new 12 mm thick plywood top BWR grade as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by Engr-in-Charge. Ref- FD/MAP-II/01

Removing of old and unsv Hard rubber shoes of Charpoi IP and S&F new Hard rubber shoe std quality as per drg Ref- FD/MAP-II/01

Removing of old and unsv ply top of Charpoi GI Pipe and S&F new 12 mm thick plywood top BWR grade as per existing shape and size with shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by Engr-in-Charge. Ref- FD-220

Removing of old and unsv stiffiner of Charpoi GI Pipe and S&F new 895 mm long stifnner made FI of size 40x5 mm thick duly painted with red oxide primer complete all as directed by Engr-in-Charge. Ref- FD-220

Removing of old and unsv long rail of Charpoi GI Pipe and S&F new long rail of 32 mm dia Medium grade GI pipes ISI Marked including cutting threading etc as required all as specified and shown on drg complete all as specified and directed. Ref- FD-220

Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required complete all as specified and directed. Ref- FD-220 Note: Pipe shall be used from unserviceable long rail obtained from Item No 152.00 here-in-before.

Replacement of unservicable legs from charpoy GI pipe 32mm dia but "except pipe" including cutting threading etc as required and directed with bottom plug made of MS Round disc complete all as specified and directed. Ref- FD-220 Note: Pipe obtained from ser Item No 153.00 here-in-above shall be used for this items.

Removing of old and unsv GI 3 way elbow of Charpoi GI Pipe and S & F new GI 3 way elbow 32 mm dia complete all as specified and directed. Ref- FD-220

Removing of old and unsv check nut of Charpoi GI Pipe and S & F new 32mm check nuts complete all as specified and directed. Ref- FD-220

Removing of old unsv Tapestry Cloth from chair writing/visitors and S&F new Tapestry Cloth of seat & back of chair writing rate of Tapestry cloth should be not less than 160/- per meter with new PVC Lipping all around it complete all as specified and directed. Ref- FD/E6/MAP/12

Removing of old unsv Handle of chair writing/visitors and S&F New Black PU Handle of chair writing all as specified and directed and as per the drawing. Ref- FD/E6/MAP/12

Removing of old unsv Tapestry Cloth from chair computer/revolving and S & F new Tapestry Cloth seat & back rate of Tapestry cloth should be not less than 160/- per meter with new PVC Lipping all around it complete all as specified and directed. Ref- FD/E6/MAP/01 & TP

Removing of old unsv Handle of chair computer/revolving and S & F New Black PU Handle all as specified and directed by the Engineer-in-Charge. Ref- FD/E6/MAP/01 & TP

Removing of old unsv Pedestral Assembly complete with castor wheel of chair computer/revolving and S&F New Metalic Pedestral Assembly complete with castor wheel complete all as specified and directed. Ref- FD/E6/MAP/01 & TP

Removing of old unsv Castor Wheel and S & F New Castor Wheel of chair computer/revolving made from superior quality as per approved sample by Garrisson Engineer complete all as specified and directed. Ref- FD/E6/MAP/01 & TP

Removing of old unsv Hydralic System of chair computer/revolving and S & F New Hydralic System of ISI Marked as approved by Garrisson Engineer complete all as specified and directed. Ref- FD/E6/MAP/01 & TP

Removing of old unserviceable top of table computer & S&F new table top of 18-19 mm thick particle board interior grade colour/shade as approved by GE with 4 mm thick teakwood half round beading in all sides with strong bonded chemical adhesive complete all as specified and directed. Ref- MAP/TP

Removing of old unserviceable Sides and s&f new sides of table computer with made of 18-19 mm thick particle board interior grade rest all as per drawings complete all as specified and directed. Ref- MAP/TP

Removing of old unserviceable Complete key board and S & F new complete key board made of 18-19 mm thick particle board interior grade grade with telescopic channel rest all as per drg & complete all as directed by Engr-in-Charge. Ref- MAP/TP

Removing of old unserviceable Complete mouse board and S & F new complete mouse board made of 18-19 mm thick particle board interior grade with telescopic channel rest all as per drg & complete all as directed by Engr-in-Charge. Ref- MAP/TP

Removing of old unsv particle board from Top/Bottom/sides/ back side of table bedside MAP and S&F new Top/Bottom/sides/ back side of table bedside map made from 18 mm thick pre laminated particle board interior grade Grade Type with suitable size screw all around side of board shall be covered with 4 mm thick wooden beading /Edging fixed with suitable adhesive complete all as specified and directed. Ref FD/E6/MAP/15 (R)

Removing of old unsv small drawer of Table Bed Side and S&F New small drawer without telescopic channel and without handle (telescopic channel and handle measure seperately) made of Ply BWR grade of suitable size dully fitted with screw and adhesive complete all as directed and rest all as per drawing. Ref FD/E6/MAP/15 (R)

Removing of old unsv big drawer of Table Bed Side and S&F New small drawer without telescopic channel and without handle (telescopic channel and handle measure seperately) made of Ply BWR grade of suitable size dully fitted with screw and adhesive complete all as directed and rest all as per drawing. Ref FD/E6/MAP/15 (R)

Removing of old unsv Teakwood runner and S&F New Teakwood runner with suitable size screw and adhesive complete all as directed. Ref FD/E6/MAP/15 (R)

Removing of old unsv Telescopic channel and S&F New Stainless Steel Telescopic Channel ISI Marked as approved by Garrisson Engineer) with suitable size screw and adhesive complete all as specified and directed. Ref FD/E6/MAP/15 (R)

Removing of old unsv Handle and S & F New Stainless Steel handle dully fixed with suitable size screw complete all as specified and directed. Ref FD/E6/MAP/15 (R)

Removing of old unsv Legs and S&F New Legs made from 18 mm MS Square Pipe 18 Gauze dully painted with black colour synthetic enamel complete all as specified and directed. Ref FD/E6/MAP/15 (R)

Removing of old unsv rubber shoe and S&F New Hard Rubber/PVC Shoe complete all as specified and directed. Ref FD/E6/MAP/15 (R)

M & L for preparation of old painted surface by scraping, denting, derusting etc and applying two coats of synthetic enamel paint (OG/Dove Grey/AF Blue) over a coat of primer by spray painting to Almirah large steel complete internal and external including top and bottom as directed by Engr-in-charge.Ref- FD-1031/MAP

All as per Item No 176.00 here-in-above but for Almirah medium steel complete internal and external including top and bottom. Ref- FD-1032

All as per Item No 176.00 here-in-above but for Locker bed side steel complete internal and external including top and bottom. Ref- . FD-1029,

All as per Item No 176.00 here-in-above but for Table office officer steel. Ref- FD-1003, FD-84(M)

All as per Item No 176.00 here-in-above but for Table office clerk steel. Ref- FD-84(M), FD-1004

All as per Item No 176.00 here-in-above but for Chair CBA Steel. Ref- FD-75(M)

All as per Item No 176.00 here-in-above but for Table 900X900mm. Ref- FD-1009

All as per Item No 176.00 here-in-above but for Teapoy verandah. Ref- FD-255

All as per Item No 176.00 here-in-above but for Table 900x600mm steel with/without drawers . Ref- FD-1008

All as per Item No 176.00 here-in-above but for Bed Hard plytop MAP. Ref - FD/E6/MAP/08(R)

All as per Item No 176.00 here-in-above but for Charpoi IP ply top. Ref - FD/MAP-II/01

All as per item No 176 but for Chair writing. Ref - FD/E6/MAP/12

All as per Item No 176.00 here-in-above but for rack adj type open/rack steel 1905x915x375mm/Reck open large 6 tier steel. Ref-FD-129/FD-1038

All as per Item No 176.00 here-in-above but for Chair school with handboard. Ref- FD/E6/MAP/05

All as per Item No 176.00 here-in-above but for Rack shoe steel. Ref- FD/E6/MAP/02(R)

All as per Item No 176.00 here-in-above but for Table computer. Ref - FD/E6/MAP/05

All as per Item No 176.00 here-in-above but for Table bedside map. Ref- FD/E6/MAP/05 (R)

CITIZEN FURNITURE INDUSTRIES (BID ID -3484062)

M/s R.K.Jain (BID ID -3479052)