Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.1 L
Closing Date
16 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SR DEN E
17 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(Placed at Page No.35 of tender form and document attached), along with copies of Audited Balance Sheets and Profit and Loss statement duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
For details refer attached documents
(a)The tenderer must have successfully completed or substantially completed (For more details refer attached documents), any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (For more details refer attached documents).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Defination of Similar Work :- Any track works by manually or mechanical means involving Deep screening or TSR or TRR or Casual Renewal or TWR or T/outs or Dismantling of tracks etc
For more details refer attached documents
15 conditions · 4 needing a document upload
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents.
The Bank Guarantee bond shall be as per Annexure- VIA (Placed at Page No. 35-36 of tender form), and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii).The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. .(i.e. excluding the last date of submission of bids) (iii).Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v).The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii).The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should mandatory submit documentary proof as per the attached checklist document.
Tenderers are abiding by the General Conditions of Contract (GCC) April 2022 & any statutory modification thereof and also abide to carry out the work accordingly.
Documentary proof - Tenderer should submit scanned copy documentary proof in regard for fulfilling the Technical /financial eligibility criteria along-with their offer (for details refer attached documents). If the tenderers do not submit any proof of meeting with the eligibility criteria as laid down in the tender conditions, the offer shall be considered as incomplete and shall be summarily rejected. Documents submitted in support of eligibility criteria after opening of tender will not be considered.
Document attached - Tender form
A)Repair of Curve, Lwr, SEJ boards, speed indicators boards, all level crossing boards, fixing of wooden blocks on platform and LC, Pre-casted fauling mark, attention of track, collection and disposal of scrap, other miscellaneous works under SSE P-Way BIRD B) Removal of vegetation along the track and on platforms in Under SSE P-way/ BIRD in ADEN (West) Panvel Section
CR-DRMWBB-2025-44-03~CR
CR-DRMWBB-2025-44-03
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹2.1 L
16 Jan 2026
16 Dec 2025
26 Dec 2025
68 items across 3 schedules · ₹1,46,76,315.02 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For 1.00m long fishplates | Joint | 1100.00 | 105.45 | 1,15,995 |
| 2 | For 610 mm long fish plates. | Joint | 600.00 | 71.37 | 42,822 |
| 3 | Lubrication of Elastic Rail Clips on PSC sleepers with contractor's grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM. | ERC | 298800.00 | 2.84 | 8,48,592 |
| 4 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 14940.00 | 48.89 | 7,30,416.6 |
| 5 | By using Contractor's Grease Graphite | Each | 4500.00 | 34.48 | 1,55,160 |
| 6 | Rail section of 52Kg and above | Each | 300.00 | 112.13 | 33,639 |
| 7 | 1 in 8½ Points & Crossing | Set | 3.00 | 13,945.32 | 41,835.96 |
| 8 | 1 in 12 Points & Crossing | Set | 8.00 | 18,971.96 | 1,51,775.68 |
| 9 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 15500.00 | 27.33 | 4,23,615 |
| 10 | Under Traffic Block Conditions: | cum | 3000.00 | 54.62 | 1,63,860 |
| 11 | For PSC Sleeper | TRM | 6000.00 | 92.94 | 5,57,640 |
| 12 | Slack picking of joint sleepers and 3 approach sleepers on either sides giving required lift to make up general track level, packing and profiling as directed. | Each | 3000.00 | 587.62 | 17,62,860 |
| 13 | With Contractor's hard wood block. | Each | 208.00 | 2,238.05 | 4,65,514.4 |
| 14 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in-charge to keep drains clean and clear in cuttings etc. | RM | 6000.00 | 33.61 | 2,01,660 |
| 15 | 1 in 12 Turnout | Set | 44.00 | 1,193.04 | 52,493.76 |
| 16 | 1 in 8½ Turnout | Set | 26.00 | 763.26 | 19,844.76 |
| 17 | Derailing Switch | Set | 55.00 | 381.63 | 20,989.65 |
| 18 | Kilometre & Gradient post | Each | 40.00 | 87.93 | 3,517.2 |
| 19 | Hectometre Post | Each | 400.00 | 99.79 | 39,916 |
| 20 | Level Crossing Post | Each | 12.00 | 172.79 | 2,073.48 |
| 21 | Curve Post | Each | 300.00 | 92.15 | 27,645 |
| 22 | Level Crossing Boom including fringe | Metre | 12.00 | 150.09 | 1,801.08 |
| 23 | For day time block working | TRM | 1000.00 | 19.74 | 19,740 |
| 24 | For night time block working | TRM | 18000.00 | 22.13 | 3,98,340 |
| 25 | 60 Kg - 110/90 UTS - Outside Track | Each | 300.00 | 216.45 | 64,935 |
| 26 | 60 Kg - 110/90 UTS - On Running Line | Each | 500.00 | 277.33 | 1,38,665 |
| 27 | Outside Track | Each | 300.00 | 52.95 | 15,885 |
| 28 | On Running Line | Each | 400.00 | 69.89 | 27,956 |
| 29 | For lead up to 500 metre. | MT | 1000.00 | 399.09 | 3,99,090 |
| 30 | For lead beyond 500 metre and up to 1 Km. | MT | 400.00 | 514.73 | 2,05,892 |
| 31 | Extra to Item no. 171031 and 171032 with contractor's Rail Dolly / Dip Lorry | MT | 100.00 | 28.72 | 2,872 |
| 32 | From wagons not involving traffic block or on lines, not opened to traffic but handling by mechanical means is not possible | MT | 100.00 | 127.7 | 12,770 |
| 33 | During period of traffic block | MT | 800.00 | 30.54 | 24,432 |
| 34 | For lead up to 500 metres | MT | 1000.00 | 310.74 | 3,10,740 |
| 35 | For lead beyond 500 metre and up to 1 Km | MT | 300.00 | 460.7 | 1,38,210 |
| 36 | Extra to Item no. 172031 and 172032 with contractor's Rail Dolly/Dip Lorry. | MT | 150.00 | 30.98 | 4,647 |
| 37 | Lead up to 5 Km | MT | 300.00 | 176.93 | 53,079 |
| 38 | Lead beyond 5 Km and up to 10 km | MT | 200.00 | 217.69 | 43,538 |
| 39 | From DMT - During period of traffic block | MT | 100.00 | 219.92 | 21,992 |
| 40 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 300.00 | 388.3 | 1,16,490 |
| 41 | All type of PSC sleepers | MT | 800.00 | 424.83 | 3,39,864 |
| 42 | P.Way fittings of all types and other similar loose items | MT | 80.00 | 402.25 | 32,180 |
| 43 | Bilingual Whistle Boards for level crossing of size 600mm x 600mm of each board with back support frame welded to vertical post of MS T section of size 75mm x 75mm x 6mm x 3950mm | Set | 8.00 | 6,599.1 | 52,792.8 |
| 44 | Speed Breaker / Rumble Strips Board of size 900 mm equilateral triangular shape and 600mmx200mm boards with back support frame welded to vertical post of MS T section of size 80mmx80mmx8mmx3650mm | Set | 8.00 | 6,164.51 | 49,316.08 |
| 45 | Un-manned Level Crossing Danger Stop Board of size 675mmx525mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mmx3650mm | Set | 8.00 | 3,966.04 | 31,728.32 |
| 46 | Manned Level Crossing Indicator Board of size 900 mm equilateral triangular shape with back support frame welded to vertical post of MS T section of size 80mmx80mmx8mmx3650mm | Set | 8.00 | 5,748.75 | 45,990 |
| 47 | Single Strip / Double Strip Level Crossing Road Warning Board of size 900 mm equilateral triangular shape and 900x300 board with back support frame welded to vertical post of MS T section of size 80mmx80mmx8mmx3650mm | Set | 16.00 | 6,416.42 | 1,02,662.72 |
| 48 | Manufacturing and supply of circular STOP Disc of 600mm dia for fixing on emergency chains at level crossings as given in IRPWM including providing Retro reflective sheet fully covered over board confirming to type-IV of ASTM- D4956 in red back ground colour and text "STOP" of white colour over back ground. The circular board shall consists of 2mm thick Aluminium sheet fixed to 1.5mm thick MS Sheet of 600mm dia with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support .Retro reflective sheet is to be pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01.A vertical holding stand of 1000 mm length x15mm thick to be jointed to back side of board along with a hook for fixing emergency chain as directed by Engineer In charge. | Each | 8.00 | 3,532.64 | 28,261.12 |
| 49 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 21.00 | 5,540.12 | 1,16,342.52 |
| 50 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 21.00 | 4,791.62 | 1,00,624.02 |
| 51 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each | 30.00 | 6,611.39 | 1,98,341.7 |
| 52 | Manufacturing, supplying and fixing Curve Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately) | Each | 261.00 | 1,013.1 | 2,64,419.1 |
| 53 | Supply and fixing in position pre-cast cement concrete Fouling Mark as per approved drawing at station yard, duly painting the top surface and slopes with white enamel paint in two coats and inscribed letters with black of Fouling Mark, complete in all respects with all labour, materials including cement, tools and plants etc. | Each | 100.00 | 458.68 | 45,868 |
| 54 | Supplying and spraying in specified proportion Weedicide Chemical, capable to kill entire weed on track / cess / embankment with all labour, material, tools & plants etc. complete job in all respect. Scientific name of the chemical is Isopropylamine Salt of Glyphosate, in which active ingredient is Glyphosate (41%), colour is light amber to brownish, very low in toxicity and has favourable environmental characteristics. It will be ensured that no weed growth occurs up to six months period, otherwise re-spraying shall be done by the contractor free of cost. | Sqm | 158000.00 | 0.63 | 99,540 |
| 55 | Galvanisation of Railway's stretcher bars, M.S.Liners, ERCs and Plate screws by hot dip process with Zinc Coating and mass of Zinc coating shall not be less than 705 g/sqm and galvanisation thickness shall not be less than 100 microns including necessary surface preparation as per Clause-4 of IS:2629-1985. Galvanisation shall be done as per IS:2629- 1985 and IS:4759-1996 with Zinc conforming to IS:209-1992, duly taking all the measures for safeguarding against embrittlement of hot-dip galvanised iron and steel products as per IS:6158-1984 with all contractor's labour, material, tools, plant, all lead, lift and crossing of tracks etc. complete and as directed by the Engineer in-charge. | MT | 5.00 | 28,364.19 | 1,41,820.95 |
| 56 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 266.50 | 752.64 | 2,00,578.56 |
| 57 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 180.00 | 889.42 | 1,60,095.6 |
| 58 | Tractor with Trolley for local transportation or other misc. works. | Hour | 100.00 | 199.17 | 19,917 |
| 59 | Manufacturing and fixing buffer stop with Railway supplied rails, cutting, including bending of rails as per plan ,with all contractor's labour, materials, tools, plants etc. and all lead and lift including crossing of track where necessary and as directed by Engineer in charge at site. Note: Excavation, fixing rails in cement concrete, drilling of holes will be paid separately. | Each | 2.00 | 15,481.58 | 30,963.16 |
| 60 | Manufacture and supply of Precast Kilometer Posts of size 1.15 x 0.50 x 0.075 m in RCC 1:2:4 mix, engraving letters and leading to work spot, fixing in position with CC 1:3:6 concrete duly making pits of size as required, painting the post, writing the letters on both sides of the post with 2 coats of enamel paint of approved quality to the Railways drawings/IRPWM with contractor's materials, cement, steel, labour, tools, plant, with all lead and lifts etc., complete as per specifications and as directed by the Engineer-in-charge. Note: Excavation, Concrete and steel work will be paid under relevant items. | Each | 40.00 | 399.53 | 15,981.2 |
| 61 | Manufacture and supply of Precast gradient Posts of size 1.65 x 0.60 x 0.075 m in RCC 1:2:4 mix, engraving letters and leading to work spot, fixing in position with CC 1:3:6 concrete duly making pits of size as required, painting the post, writing the letters on both sides of posts in 2 coats with enamel paint of approved quality to the Railways drawings/IRPWM with contractor's materials, cement, steel, labour, tools, plant, with all lead and lifts etc., complete as per specifications and as directed by the Engineer-in-charge. Note: Excavation, Concrete and steel work will be paid under relevant items. | Each | 40.00 | 545.04 | 21,801.6 |
| Item- 2 | in Under | SSE P-way/ | BIRD in | ADEN | |
| Schedule total | ₹99,62,028.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .