supply of Thermel Lab Items

SUPPLY OF MECHANICAL DEPARTMENT THERMAL LABORATORY ITEMS

4-STROKE DIESAL ENGINE WITH MECHANICAL LOADING ENGINE : 5 HP DIESAL ENGINE: No. of Cylinders : 1 Bore X stroke : 80 X 110 mm Cubic Capacity : 0.533 Litres Compression Ratio : 16.5:1 Rated Output : 3.7 KW Torque at full load : 0.024 KN-m (2.387 kg-m) Crankshaft Center Height : 203 mm Specific Fuel Consumption : 185+5 % gm/hp-hr Lub Oil Consumption : 0.8% of SFC 5 HP at 1500 rpm coupled with Rope Brake Dynamometer loading device on a common base plate arrangements PANEL BOARD ARRANGEMENTS Burette arrangement is used to measure the fuel consumption, U tube manometer for air intake measurement, Proximity sensor and RPM Meter is used to measure the speed, Digital temperature Indicators, K type Thermocouple arrangements. AIR INTAKE MEASUREMMENT Consist of an air tank mounted on an iron stand fitted with a suitable orifice plate COOLING WATER Consist of suitable inlet and outlet piping with flow control valve. Water meter to measure the rate of flow of cooling water and digital Thermometers with pocket connection for measuring inlet and outlet water temperature with water flow meter and stop watch.

SINGLE CYLINDER PETROL ENGINE ENGINE: Greaves Brand New 3 HP Single Cylinder Petrol Engine at 3000 rpm coupled with loading device on a common base plate arrangements [Rope Brake Arrangements] 3 HP Petrol Engine Specification Engine Type : Single Cylinder Air Cooled Bore : 70 mm Stroke : 65 mm Output : 3 HP ( Approx.) Max. Torque (nm) : 14@1700 Cooling System : Air Cooling Loading arrangement : Mechanical Loading Arrangement PANEL BOARD ARRANGEMENTS Burette arrangement is used to measure the fuel consumption, Proximity sensor and RPM Meter is used to measure the speed. .

SENTHUR ENGINEERINGS

BHARATHI AGENCY

INSTRUMENT INDIA

Vintech Systems