Civil Work

Amount

Removal of Existing Aluminium cement partical board false ceiling including labour charges for removal of channel and rubber beeding etc., complete.

Dismantling , removing and carefullyAC sheet roof /GI sheet roof etc;, complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully stacking ONE COURSE of pressed tile roof finish in cement mortar etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged Brick work in cement mortar under 3m height and clearing away carefully disposal of unserviceable materials to lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling, Reinforced cement concrete and clearing away the same 50 m away from the site and roughening the surface etc., complete complying with standard specification and as directed by the Departmental officers.

Providing Post constructional Anti termite treatment by drilling 1/2" dia holes at uniform intervels of 12" at the junction of the building and the Chemical ALDRIN (0.50%) will be injected on walls and floors to a depth of 4" to 5" inside or as directed by the departmental officers. The building and the chemical ALDRIN (0.50%) will be quirilled inside these hole leg using hand pressure pumps from its fills to it refusal. The wooden frame will be spread by the same termicide solution center pheriphery of the building will be treated by the making a small channel around the building and the holes are to be made by using crow bar around termicide (ALDRIN) to be squrilled inside these holes after completion of treatment all holes drilling in the walls and floor closed by cement etc complete complying with std spn, and as directed by the departmental officer. The chemical is to be used on the work should be got approved by the executive engineer's before use on the work.

Brick work in following Cement Mortar 1:5 20mm thick using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

In Fourth floor

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick bonding agent cebex 112, Zydex-zycrete 2x or other Equivalent compound conforming to BIS at 200ml of one cement bag (50Kg) per increased work ability and air entrainment in all floors including curing etc.including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick mixed with bonding agent cebex 112, Zydex-zycrete 2x or other Equivalent compound conforming to BIS at 200ml of one cement bag (50Kg) per increased work ability and air entrainment in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting the walls with two coats with first class quality Exterior emulsion paint of approved colour over a putty and priming coat including thorough scrapping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of paris whever required and neat finishing etc. complete complying with standard specification.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

For Fourth floor

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Clearing the surface thoroughly with water and remove all the impurities and loose plaster, flacks, fungus growth etc by suitable mechanical means like scrapping or wire brushing and subsquently washing with adequate water to get an abosulutely cleaned surface to take on further treatment. All the grooves will be refilled with multi proof co polymer with filler loose plaster and cured cement mass will be removed to make the surface clean and applying Gal tech CT epoxy virigen solvent free anti corrosive two pack resin 50 + Hardner 50 (1 coat) as primer impregnated with 110 GSM class cloth over that apply C.T. Epoxy two coats as finish that will for's FRB lining.

Providing and Applying Polyurethane hybrid liquid applied GRIHA certified Waterproofing coating with flutyne protection technology, single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof having Tile or any non-porous surface applied @ 1.5 l/m2 in 2 coats to achieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D 412; Elongation at break ≥ 300% and Crack bridging ability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390 - 8:2019, including surface preparation, priming the surface with single component high-performance waterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification.

Supplying and Fxing new Aluminium sliding window frame with shutter with newone of anodized natural colour matt Aluminium sliding window two track channel section of size 61.85 x 31.75 x 1.30mm for bottom side and top with sliding arrangements to drain the water entering and the window shutter made out of section of size 40 x 18 x 1.29mm and the panels fitted with 4mm thick plain glass with necessary accessories such as rubber beedings, best quality runner, lock, wheel, handle etc and shutter frame fixed with glass 4mm thick including cost of materials, labour for fabrication, power consumption required, drilling holes in masonry with power drill and good to the dismantled portion to original condition after fixing the window etc complete complying with standard specification and as directed by the departmental officers at site of work.

Removing and refixing in the aluminium door or window and refixing the same in its position with new rubber beedings L angles screws and replacement of other materials such as PLB Board if necessary including the cost of all materials labour charges dismantling brick or RCC and redoing the same to its original position etc., complete.

Easing the existing over hanging doors and windows including renewing from its position and refixing the same after attending petty repair works including labour for wrought and put up in position fixing necessary furniture fittings excluding cost of furniture etc., complete complying with standard specification and as directed by the departmental officers at site work

Supplying and fixing alround window frames and shutter styles using T.W scantlings and window planks using C.W planks of 40mm thick including labour charges fixing and with necessary furniture fittings.etc complete complying std. specification.

Supplying and fixing Weld mesh7.50cmx2.50cm 10 gauge including labour charges for fixing and cutting welding charges etc., complete complying with std. specification and as directed by the deptl. Officer.

Providing two legged pipe scaffolding using 48.30mm dia heavy duty M.S. pipe over all height 3.00m the distance between two legs being 1.25m and the spacing of the post being 2.00m in each rows and providing platform with country wood planks using 40mm thick silver oak and 1.00m wide in complete from with horizontal bracing @ 1.50 c/c vertical directions and with cross bracing using same 48.30mm dia including cutting threading assembly with one coat red oxide primer, labour charges cost of special such on large plate, shoe, catcher, coupling, bolt and nutt transport charges and handling charges. The bottom of vertical post shall rest on 300x300x70mm thick, 1:2:4 concrete base as per the standard specification. The cross bracing to be assembled as per the sketch enclosed.

Initial height of 3m

Ever additional 2.50m height

Supplying and Fixing new 2 square PVC Laminated Gypsum board GYPTYEX False ceiling in the true horizontal level false ceiling grid using hot dipped galvanized steel section exposed surface chemically cleaned capping pre finished in branded poly system paint, wall angle of size 3000x24mmx24mm using in periphery of the ceiling fixed to the wall partition RC columns band walls with the help of screws of 60mm main runner of size 24x35x3000mm suspended at a 1200mm c/c by using 24x14mm angles hanger securely fixed to the structural soffits of RC slab by using 6mm cross tee of size 24x26x1200mm to be inter locked between in main runner at 600mm c/c mark to form a grid of 600x600mm long cross tee of size 24x26x600mm fixed in between 1200mm long cross tee for forming a grid of 600mmx600mm finally laying high quality vinly film with back side aluminium foil PVC laminated gypsum ceiling tiles regular of size 595x595x7.50mm to 8mm thick of noise reduction co-efficient NRC of 01-03 relative humidity 95% density of 780kg.m3 and light refection 0.75 etc., complete.

Providing and Fixing of polyurethane foam for Sloped roofs thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification.

Supplying and fixing with Hollow square section / M.S.pipes of various sizes approved quality and brand including labour charges for cutting and welding with required size an comply complying with std specification and as directed by the departmental officers

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC Pipe

110mm dia PVC Pipe

160mm dia PVC Pipe

Supplying and fixing new Powdercoated aluminium partition fully glazed made out of aluminium box section of size 63.50 x 38.10 x 1.28mm with vertical and horizontally and the partition fixed with top & bottom with plain / frosted of 4mm thick glass as per the instruction of the field officers including necessary accessories like rubber beedings, aluminium clips etc and also including the labour charges for fabrication which including necessary chipping dismantling making holes in RCC of necessary works with power drill and redoing the same to the original condition after fixing the partition in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing new aluminium door 1/2 glazed and 1/2 panelled using anodized Powder coated matt finish aluminium door with frame made out of 47.62 x 44.45 x 1.18mm for vertical, top, horizontal and middle. Bottom, horizontal made out of frame size 101.60 x 44.45 x 1.20mm and the door panel top 1/2 portion is fixed with 5mm thick plain / glass and bottom half portion fixed with 9mm thick novapan board includng necessary accessories like alumnium clips, rubber beedings, door handle, door closer, furniture fittings, screws etc and also inclusive of labour charges for dismantling the exisitng masonryor RCC works and making holes required with power drill, power consumption charges fixing the door frame and shutter frame in position redoing the dismantled portion to the original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing Tensile Roofing of approved Design made of Mild steel frame and a cover made of flame retardant PVC coated polyester fabric with type1 900 GSM warranty for product and weld. The structures are equipped with base plates and mounting parts made of mild steel and all the components are modular and nut bolt connections Passing ASTM standards. . The structures are equipped with base plates and mounting parts made of mild steel. The lightweight structure of different spans are easy and quick to install. All materials are shot blasted and primer with paint application to exceed Required microns as per IS code of coverage are easy and quick to install. Brand : Sioen, Belgium / Mehler, Germany Warranty for Fabric: 10 years Unit Size – 34m x 6.6m 10.4m x 6.6m 10.4m x 6.6m rate excluding GST

Collecting the scattered debries from the campus and conveying away the same to ouside by lorry to a lead of 3km Entirely within city limit including loading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Double charged Vitrified Tiles of size 800 x 800 x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with colour ceramic tiles of approved quality, colour ( Johnson / Endure / Equivalent make New Tek BT Yellow ) Tack tile is longer design and button design landing/ identified portion of floor tile size is 305x305x14.5mm thick. of approved make, quality and colour in all floor over a base layer of cement mortar 1:3 (one cement three M.sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmntal officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M.sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing Elevation walls with following best approved quality, Designed colour ceramic tiles 600x600x8mm thick of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Renewing and refixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc

Polishing the stone wall applying the liquid which is made of grinding the composition of Banyan fruit, Aloe vera, pongamia pinnata, lemon, Sodium carbonate decahydrate in equal ratio (soaked in water for 10 days for fine grinding ), allowed for ten minutes in the stone surface for removal of the dirt, strains and other oil stains with standard specifications etc., complete complying as directed by the departmental officers

Paving the rubber moulded hydraulic pressed paver block inter locked blocks of size 83mm over a sand cushion and laying the paver blocks in true and straight alignment with gradient and pointing neatly using quarry dust or fly ash and pointing neatly hire charges for vibrator machine including diesel consumption charges etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and Fixing the Fasle Ceiling with new one of using Hilux Board Plain Sheets (10mm thick) of approved quality and design suspended from the ceiling using "U" shaped Galvanised iron channels at 1.20 M centre to centre on both longitudinal and cross direction for vertical support and fixing "U" shaped G.I channels at 0.90 m centre to centre on longitudinal direction respectively for horizontal support by using T.W reapers at corners and at intermediately and fixing of plaster of paris on the panel provided as per design / patttern given by the site officer and finishing the ceiling surface with some plaster of paris materials etc. Necessary openings should be made for providing spotlights, florescent tubes in the ceiling by using plywood 12 mm thick and opening should be covered with Acrylic panel complying with standard specification and as directed by the departmental officers etc. complete. All the materials should be got approved before use on work by the Executive Engineer.The rate is including two coats of plastic emulsion painting over the wall coat primer etc., complete.

Supplying and fixing of WPC False ceiling- WPC Baffle shall be made of mixture of wood dust & poly ethylene mainly. - Colour shall be of wooden texture - Size shall be 100 mm x 50 mm (W x H) & shall have minimum Gap, Including all accessories such as hanging arrangement, screws and other accessories - All suspended hanger, clips, unigrid channel shall be Galvanised mild steel - Installation shall be done as per manufacturer’s specification - Shall have dimensional stability, longevity resistance to rot and crack, Stable over a wide temperature range, weather resistant, Moisture resistant, low flame spread, High impact resistant, Outstanding screw and nail retention, Environmentally friendly, recyclable and Contains no toxic chemicals or preservatives - Color of Baffle shall be approved prior to installation. The product has a natural woody texture and a high-grade wooden texture. The product can be shaped, plastic, and can be personalized with the design. High mechanical. No cracks, no expansion, no deformation. No need for repairs and maintenance, easy to clean. The service life can reach 30 years. No pollution. Production and installation speed is fast, and construction efficiency is improved.

Supplying and Fixing WPC Wall Panelling Using frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 19mmthick over the aluminium frame work with necessary screws. The design pattern, water proof plywood and other materials to be used over the Plywood using WPC wall panelling- Formaldehyde-free environmental protection, sound insulation, and noise reduction Fire and flame retardant, waterproof and moisture-proof, non-corrosive. Thermal insulation and air purification. Anti-insect and mothproof Width: 150mm Length: 3000mmThickness: 18mm Material: Wood plastic compositeProcess: Laminated Surface; Hot and Cold Pressed; Side GroovingApplication: Indoor background wall, indoor ceiling Most of the protruding parts of the wood-plastic board are vertical bars, and the middle part is hollow. including all necessary fittings

Supplying and fixing of acrylic laminate sheet of using best and approved quality of size 8x4ft 2.5mm thick with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 19mm thick over the aluminium frame work with necessary screws.acrylic laminate sheet of 2.50 mm thick laminates will be fixed over the plywood using fevical and finishing neatly. The rate inclusive of Materials, Labour, conveyance Charges

Providing Wall Panelling using one 19 mm thick water proof plywood over the sheet using 3mm thick laminate of one side with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 19mm thick over the aluminium frame work with necessary screws. 3mm thick laminates will be fixed over the plywood using fevical and finishing neatly and the rate inclusive of conveyance to site and labour charges also fixied

Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound block class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed and of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with paraffine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete

Supplying and fixing of Zeebra blind made out aluminium alloy pelmet with necessary control unit with accessories etc., Fabric composition of 100% polyester with weight of 205 g + 5% per m2 fabrics are fire retardant against korea fire equipment inspection corporation passed complying with standard specification and as directed by the departmental officers.

Supplying and Fixing of Conference Executive Chair of Dimensions: H 44 x W 28 x D 28; Seating Height 19.7 (all dimension in inches).The fully synchronized mechanism provides a synchronized titling action where the seat and back recline together at the fixed ratio of 2:8:1 which reflects the natural geometry of the way the body moves, providing fluid ergonomic support. The rate inclusive of transport and delivery.

Supplying and fixing ultimate comfort by providing you fully adjustable chair which has Ergonomic Nylon back support, with breathable mesh to keep you sweat free, adjustable height, Smart Tilting Mechanism with locking feature and Smooth 360 degree Swivel. of size 49D x 60W x 100H high back Provides optimal comfort and firm support, enhancing performance while remaining lightweight Ensures strength and stability for long-lasting performance Enhance your comfort with our intuitive tilt control, offering easy adjustment of the chair's tilt angle for personalized support and relaxation both durability and comfort, with a modern design aesthetic etc., complete.

Supplying and fixing of morden detachable table of size 3ft x 2ft x 2.5 ft factory mould bottom portion using metal frames and the top using enginewiring wood with laminates and also using moving wheels of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and fixing of morden detachable of Round Conference table of size 4.95m radius factory mould of using enginewiring wood with laminates and also using moving wheels of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Suppling and fixing in position of reception round table of size 3.60m dia and 1.05m height using 19mm thick water proof flexible ply wood best and approved quality, over the plywood using wood louvered panelled of using best and approved qualiy and table top finished with stone finishing. Finally applying the varnishing with neat finish etcs rate inclueds of labour and conveyance charges.

Suppling and fixing in position of counter table of size 3.5.0m x 0.62m x and 0.75m height using 19mm thick water proof flexible ply wood best and approved quality,over the plywood using wood louvered panelled of using best and approved qualiy and table top finished with stone finishing. Finally applying the varnishing with neat finish Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Suppling and fixing in position of wall panelling The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 19mm thick over the aluminium frame work with necessary screws.over the plywood using wood louvered panelled of using best and approved qualiy. Finally applying the varnishing with neat finish Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and Fixing of display board stand of size 750mm x 2100mm using metal frames, soft with glass Shutters it shoud be a locking system and of standard specification colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and Fixing inposition of 5.5mm thick glass with CNC metal fixed partition of size 1.47m x 3.00m using best and approved quality it shoud be long durable and a standard specification. The rate inclusive of transport and delivery.

Supplying and fixing of the three seater waiting area visitor reception stainless steel leg , handles with design seaters chairs with neat finish of length 70inches, width 26 inches and height 31 inches. The chair should have 325-350Kg weight handling capacity with shining silver colour and 6month of warranty.

Supplying and fixing in strech false ceiling Maximum Recommended Square Metre Size Per Sheet Matt – 50 sq. m / Satin – 50 sq m / Lacquer – 50 sq. m / Translucent – 50 sq. m Weight per sq mt Matt/Translucent – 0.18kg / Satin – 0.17kg / Lacquer 0.17kg Acoustic Properties ISO 354:2003 – 100mm VOID Absorption coefficients guide for typical installation using stretched materials with minimum 40mm insulation above. Acoustic Micro-Perforated 250,000 holes / per sq mt NCR – 0.90 AlphaW – 0.75 Thermal Emission Factor NH/PTH Matt – 0.16 / Satin 0.16 / Lacquer – 0.15 Thermal Emission Factor ESPIL Matt 0.84 / Satin 0.84 / Lacquer – 0.85 Antistatic Typical average for Lacquer – 4.10 at 11ohms Light Reflectance and Transmission Colour / finish Reflectance % Transmission % White Lacquer 78.8 9.6 White Matt 81 9.8 Translucent 39.2 74.9 Fire Rating Awarded new Euro classification to: EN13501-1, Rating: B S1 d0, UK Equivalent to Class “0” designation for building regulations.

Vapour Barrier Stretch has gained awards from the Swimming Pool and Allied Trades Association – Water Vapour Permeability Tested To BS 3177 Hygiene Typical Microbiological Trial 14 Days – chlorinated solution wipe after 7 days – inoculated Bacterium – E.Coli, Listeria, Salmonella, Yeast, Mould – NONE DETECTED. General Ceiling sheet thickness nominal 0.2mm and is manufactured in roll form with ultrasonic flush welded joints starting at approx 1.5m centres, for printed panels the seam welding will be below. Plastic track can be heat bent to match curved profiles. Optional aluminium track is anodised to 20 microns with a serrated type to create curved profiles or to form three-dimensional shapes, domes or vaults.Air Movement All air handling within the installed area must be balanced to prevent ceiling movement and possible damage for pools. Handling equipment should not be run with covers off during servicing. Cleaning Use non-abrasive cleaners and polish with an evaporating cleaner to remove any streaks. Guarantee This product is covered by a 12 year Guarantee. Stretch Aid Stretch Ceilings prides itself on its dedicated maintenance and aftercare workforce, specialising in all Stretch Ceiling products.

Installation Track is screwed (& plugged) to supplied surfaces which should be rigid and true. Plasterboard should be skimmed and have a background member within, to take 12-15kg per linear metre tension. The jointing double track can be suspended using rigid and true timber or MF metal studwork. Installation of the sheet requires raising of air temperature to approx 100ºF/38ºC using propane gas heaters by us albeit the site should be heated in winter.All adjustments and apertures for lighting, ducts and pipework are made on site. Silicone sealed tracks can achieve impermeable barrier, as required for swimming pools and asbestos containment etc.Decorated walls must have 1st coatapplied and tiled walls must be grouted before tracking. Wall coverings should be applied after tracking. Care should be taken by other trades once the panel is installed to prevent damage and the area/void should be clear of all obstruction, objects or flies etc. As the product is a fabric material a minor deflection may be apparent in some panels, it is advisable to have a minimum gap above doors etc of 100mm.We can accept no responsibility for any effects achieved. It is important that the area of installation is sufficiently ready to allow installation in the opinion of Stretch Ceilings Ltd, all pricing is given with normal working hours.

Manufacturing , Supply and delivery of Rectangular Shaped Book Shelves made out of 19mm BWR PLYWOOD top,sides and front covering and commercial plywood leg over that 1mm wooden laminated Sheet and center 1 ft is high gloss laminate and all side with teak wood beading with sealer polish Supplying and fixing of wooden book shelf of dimensions 3.5mx0.62mx1.50m with each side 16Nos ,opens of approved quality and brand with standard specifications and as directed by the departmental officers. The rate inclusive of transport and delivery.

Supplying and fixing of Curved wooden book shelve of dimensions 3.5mx0.62mx1.50m with each side 3 Nos opens ,thickness: 19mm ply wood: of approved quality and brand with standard specifications and Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and fixing of Cushion integrated chair of 24' x 31' Made of high-density fabric Breathable and skin-friendly Dust-proof, anti-fouling, protect the sofa from stains, with wooden legs of approved quality and brand with standard specifications ,Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and fixing of Cushion integrated Stool Made of high-density fabric Breathable and skin-friendly Dust-proof, anti-fouling and the bottom using wood of approved quality and brand with standard specifications Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Square shape stool of size 22'x 22'x 24'

Triangle Shape Stool 22' x 24'

Triangle Shape Stool 22' x 18'

Triangle Shape Stool 22' x 16'

Supplying and fixing inpostion of Tamil Brass & English Letters of size 15cm of approved quality as directed by the departmental officers Etc., complete complying with standard specifications.

Tamil Letters 15CM

English Letters 37cm

Supplying and fixing inpostion of Emblem of size 15cm of approved quality as directed by the departmental officers. Etc., complete complying with standard specifications.

Supplying and fixing in position of frameless glass door of size 1200 mm x 2100 mm work fixing of 11.52mm laminated glass door (5mm toughened glass –ST-167 + 1.52mm pvb lamination + 5mm toughened glass – ST 167) using of Dormakaba patch fittings Top pivot PT24, Top patch 20, Bottom patch PT 10, Corner US10 and center handle 450mm length and heavy duty floor spring BTS 75, complete door assembly. The rate include cost of all materials, labour charges and also includes charges for redoing the disturbed portion of flooring etc, complete as directed by the departmental officers

Painting the walls with two coats with first class quality Interior emulsion paint of approved colour over a priming coat including thorough scrapping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty whever required and neat finishing etc. complete complying with std. specification.

Supplying and Fixing new Armstrong board false ceiling in the true horizontal level false ceiling grid of prelude XL system using hot dipped galvanized steel section exposed surface chemically cleaned capping pre finished in baned poly system paint wall angle of size 3000x19mmx19mm used in periphery of the ceiling fixed to the wall partition RC columns band walls with the held of screws of 600mm main runner of size 24x32x3000mm suspended at a 1200mm c/c by using 3mm at GI wire hanger securely fixed to the structural soffits of RC slab by using 6mm cross tee of size 24x27x1200mm to be inter locked between in main runner at 600mm c/c mark to form a grid of 200x600mmx600mm long cross tee of size 24x27x600mm fixed in between 1200mm long cross tee for forming a grid of 600mmx600mm finally laying mineral fire finished regular of size 600x600x15mm manufactured by M/s. ARMSTRON WORLD INDUSTRIES LTD AS BS 476/23 of 1987 of noise reduction co-efficient NRC of 0.55 thermal conductivity K-0.052 W/mo weight of 3.53kg/cm2 and humanity resistant at R.H.99.

Providing Wall Panelling using one 19 mm thick water proof plywood over the sheet using 1mm thick laminate of one side with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 19mm thick over the aluminium frame work with necessary screws. 42, 51, 65mm thick laminates will be fixed over the plywood using fevical and finishing neatly and the rate inclusive of conveyance to site and labour charges also fixied The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Departmental officers etc., complete.

Supplying and fixing of Tree pattern round table of size 1750mm dia of using engineering wood, over the wood Finishing with laminate sheet of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and fixing of Tree pattern Book shelves of size 900mm x 2100mm of using engineering wood, over the wood Finishing with laminate sheet of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Providing 3D paint Art work in pantry walls and ceiling including cost of paint, brushes, scoffolding and Labour charges etc., all complete and as directed by the departmental officers.The Design, Pattern and Colour Should be got approved from the departmental officers.

Supplying and fixing of Interlocking Rubber matt of thick 12 mm of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and fixing of wooden table of size 1.80mx0.92mx0.92m using engineering wood, over the wood Finishing with laminate sheet of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

Supplying and fixing of wooden Computer table with draw of size 1.00mx0.75mx0.75m using engineering wood, over the wood Finishing with laminate sheet of approved quality and brand with standard specifications , Colour and Design got approved from departmental officers during the Execution. The rate inclusive of transport and delivery Charges.

SRK ELECTRICALS (BID ID -1172350)