CERTAIN REPAIRS TO SANITARY JOINERY FLOORING CEILING AND CONNECTED ITEMS IN INWTC OYSTER ROCK MIDDLE GROUND AND CERTAIN AREA UNDER AGE BR II UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Supply & Fixing in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified

Supply & Fixing in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified

Supply & Fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified

Supply only cast iron 'P' trap 100mm dia complete all as specified

Supply & Fixing in repairs PVC valveless syphonic action type, flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified

Supply & Fixing in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified

Supply & Fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply & Fixing in repairs health faucet (ABS Body) Stainless suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply & Fixing in repair under counter wash hand basin vitreous china of white/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified

Supply & Fixing in repair table top wash hand basin vitreous china of white/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified

Supply & Fixing in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

Supply & Fixing stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair complete all as specified

Material & Labour in repairs 18 mm thick factory made acrylic board suitable for cupboards, drawers etc of any colour complete all as specified

Material & Labour Auto clouse hinges stainless steel for full overlap for cup board shutters etc complete all as specified

Stainless Steel cabinet/ door/drawer handle decorative handles suitable size variying from100 to 200 mm complete all as specified

Supply & Fixing in repairs SS Magnetic door catcher for drawer, cupboards etc complete all as specified

Supply & Fixing in repairs Stainless steel wire baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified

Supply & Fixing in repairs Stainless steel multipurpose baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified

Supply & Fixing in repairs Stainless steel cutlery unit,cup and saucer unit baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified

Supply & Fixing in repairs Stainless steel thali basket SS 304 with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified

Supply & Fixing Stainless steel locks suitable for cupboards, drawers etc complete all as specified

Supply & Fixing in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified

Supply & Fixing in repairs fancy type CP cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed complete all as specified

Supply & Fixing in repairs fancy type CP bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified

Supply & Fixing in repairs fancy type two way CP bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified

Supply & Fixing in repairs CP angular stop cock 15 mm dia , screwed for pipe and fixed complete all as specified

Supply & Fixing in repairs Stainless steel soap dish holder complete all as specified

Supply & Fixing coner glass shelfwith bracket complete all as specified

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified

Supply & Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 15 mm bore pipe complete all as specified

Supply & Fixing UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 20 mm bore pipe complete all as specified

Supply & Fixing PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified

S &F in repairs 32mm dia CP waste coupling, complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified.

Supply & Fixing vitreous china urinals, bowl type , flat back, size 465X355X265mm, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe), fixed in repairs.

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs. complete all as specified

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs. complete all as specified

Dismantling water tank of capacity exc. 1000 Ltrs but n.exc. 2000 ltrs. complete all as specified

Supply & Fixing rotational moulded polythylene water storage loft tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

Supply & Fixing rotational moulded polythylene water storage tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

Supply & Fixing rotational moulded polythylene water storage tank of 2000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

Supply & Fixing in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.

Supply & Fixing in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile complete all as specified

Supply & Fixing SS grating suitable for 100/75 mm bore all as specified and as directed.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified

Taking down shutters of any description not exc 1 sqm each complete all as specified

Supply & Fixing 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

Supply & Fixing 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified

Supply & Fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified

Supply & Fixing 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood complete all as specified

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified

Supply & Fixing factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

Supply & Fixing in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc all as specified and as directed by Engr- in- charge.

Supply & Fixing in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified

Supply & Fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified

Supply & Fixing 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

Supply & Fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

Supply & Fixing in repairs 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

Supply & Fixing for aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified

Supply & Fixing in repairs for aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified

Supply & Fixing for aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified

Supply & Fixing in repairs for aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified

Supply & Fixing 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified

Supply & Fixing Stainless steel butt hinges 100 mm complete all as specified

Supply & Fixing 75 mm Stainless steel butt hinges and fixed complete all as specified

Material & Labour for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165 complete all as specified

Supply & Fixing in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

Supply & Fixing Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and ofweight not morethan 35 kg and fixed complete all as specified

Dismantling single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified

All as per item above but bedded in cement mortar complete all as specified

Dismantling of tile battens of any size incl fillets spacing exc 15 cm complete all as specified

Dismantling of unframed timber scantling 40sqcm and over in section in any position complete all as specified

Dismantling of unframed timber scantling under 40sqcm in section in any position complete all as specified

Dismantling boarding of any description, fixed in any postion with nails complete all as specified

Material & Labour for second class hard wood timber scantling clean sawn unframed complete all as specified

All as per item No 84 but except timber complete all as specified

Supply & Fixing 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

Material & Labour for 2nd class HW battens for tiles etc clean sawn sectional area exc 15 and n.exc 25 sqcm and spacing of 30 cm centres complete all as specified

Material & Labour for roof tiles, Mangalore pattern , interlocking at side joints laid dry complete all as specified

Material & Labour for ridge tiles mangalore pattern bedded and jointed in cement mortar 1:6 complete all as specified

Material & Labour for preparing the surfaces of tiles battens new or old of any size and spacing and applying two coats of creosote oil all as directed (measured over all one side only, spaces not deducted).

Supply & Fixing for 2nd class HW boarding 25 mm thick planed one side with butt joints and fixed with nails in any position complete all as specified

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

Supply & Fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified

Supply & Fixing 0.63mm thick plain galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length nd girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers complete all as specified

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

Supply & Fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

Supply & Fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240 complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

Supply & Fixing Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

Supply & Fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Material & Labour for false ceiling made out of 600x600x 4 mm thick (non asbestos fiber cement designer/coloured) ceiliing board / tiles deep panel complete all as specified

Material & Labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and directed.

Supply & Fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

Supply & Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing.

Supply & Fixing PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Supply & Fixing UV PVC wall /ceiling paneling consisting of 3 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Supply & Fixing in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

Supply & Fixing 12mm thick plywood ,grade bwp type BB, fixed with screws to timber frame as in paneling/partition complete all as specified and as directed.

Material & Labour 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instruction complete all as specified and as directed.

Supply & Fixing in repair 12mm thick, toughened glass including itching etc for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.

Supply & Fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed all as specified and directed.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.

Material & Labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

Material & Labour for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Grinding and polishing existing floor of any type (Kota stone,mosaic,cuddappa stone etc) all as specified and directed.

Material & Labour for PCC 1:3:6 type C-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified

Material & Labour for pre painted machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour incliuding filling the joints with rising surface vibrator etc complete all as specified.

Material & Labour for sand under floors or in foundations including watering and consolidation, spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required complete all as specified

Material and Labour for machine pressed chequered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified

Material & Labour for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

Material & Labour PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc. complete all as specified

Material & Labour for applying a coat of bituminous primer 0.25 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. After applying of bituminous primer applying evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces. Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm, as specified here-in-after. The APP membrane shall be laid using torch on application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet . over the APP membrane provide a polypropylene/polyester, non woven geotextile fabric of 150 gram/Sqm complete all as specified and directed.. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of bituminous primer and a coat of bitumen 85/25 at the rate of 1.2 Kg per Sqm for APP membrane omplete all as specsified and directed by Engineer-in-Charge.

Material & Labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)

Material & Labour for cement concrete 1:3:6 type C-1 , (20 mm graded stone agg) as in foundation filling and sunken floors etc all as specified and directed.

Material & Labour examining concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms, grooving the edges same with grinder upto 5 -10 mm depth without damaging existing rebars, carefully removing unsound weak/ loose concrete/ cover & concrete around the rebars upto 10 mm depth by low impact high frequency hammer/ chipper without damaging the sound concrete, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis outside the premises, etc, complete all as specified and directed necessary scaff -folding complete all as specified and directed.

Material & Labour for cleaning existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, dirt etc complete and applying two coats of alkaline rust converting primer Sika RustOff 100 or ReArm Rust Remover with brush on the existing rebar for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days including surface preparation. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth, complete all as specified and as directed by Engr-in-charge Note: Work to be executed by the authorised applicator of manufacturer only.

Material & Labour for Drilling & Re baring of 12 mmdia x 120mmdeep, thoroughly coated with Zinc based reinforcement epoxy AquaArm CoatZP complete all as specified and as required.

Material & Labour Providing and Application Aqua Arm Coat-ZP as passivator/ Anti corrosion coating to the steel reinforcement shall be applied The material shall be two component cement based polymer modified two component coating for corrosion protection. The material shall be prepacked and ready to use. It shall be fully compatible with the reinstatement methods adopted complete all as specified and as directed by Engr-in-charg. This shall include surface preparation and erection of steel props as required for the application complete all as specified and directed . Note: Work to be executed by the authorised applicator of manufacturer only.

Material & Labour of two component solvent free epoxy bonding agent Sika Sikadur 32LP/ ReArm Superbond or equivalent for bonding old to new concrete . The ready to use epoxy bonding agent shall be applied over old concrete using brush after cleaning of surface of all dust or latiance. The material is supplied as a two part material in pre weighed quantities for ready onsite mixing and use.2.The new concrete shall be placed within the open time as specified by the manufacturer to ensure maximum bonding and application shall be as per the manufacturer instruction , complete all as specified and as directed by Engr-in-charge. Note: Work to be executed by the authorized applicator of manufacturer

Rebuilding the section of damaged RCC elements to its original size in thickness of 25mm by hand or spray application by Providing and applying Sika MonoTop@- 122F single component, fibre reinforced, sulphate resistant, low shrinkage, high performance cementitious structural repair mortar or by micro concreting in the ratio of 1:2:4 added with water proofing admixture WP-10 or Sika Latex SBR as specified or directed by engineer incharge. Note: Work to be executed by the authorised applicator of manufacturer

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified

Demolition and breaking up drain pipes salt glazed ware, reinforced cement concrete) set in cement mortar 100 mm complete all as specified

Supply & Fixing 110mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls complete all as specified

Supply & Fixing 75 mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls complete all as specified

Supply & Fixing PVC (SWR) bends 110 mm complete all as specified

Supply & Fixing PVC (SWR) bends 75 mm complete all as specified

Supply & Fixing PVC (SWR) branch piece 110 mm single Y complete all as specified

Supply & Fixing PVC (SWR) branch piece 75 mm single Y complete all as specified

Supply & Fixing PVC (SWR) vent cowl 110 mm complete all as specified

Supply & Fixing PVC (SWR) vent cowl 75 mm complete all as specified

Supply & Fixing 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

Material & Labour in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement75 mm dia. complete all as specified

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed

Supply & Fixing 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with ms clamps all as specified and directed.

Supply & Fixing 160mm dia bore PVC (SWR) bends any radius complete all as specified

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (40 mm graded stone agg) as in sub base complete all as specified

Material & Labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement complete all as specified

Supply & Fixing 2mm thick Linoleum ,plain coloured laid in floors incliding streching, cutting , fitting incl seales down with an approved adhesive complete all as specified

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water on plastered surfaces, complete all as specified and as directed.

Material & Labour preparation of plastered surfaces and applying two coats of acrylic polymer modified cementious high performance coating including smart care crack seal coat complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed..

Material & Labour rendering 15mm thick in CM 1:6 on brick surfaces, finished even and smooth without using extra cement on walls to plastering complete all as specified and as directed.

Material & Labour rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified

Material & Labour rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including all as specified and directed. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified complete all as specified

Material & Labour for applying 1 to 2 mm thick wall care putty for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.

Material & Labour for applying two coats of oil emulsion distemper over newly plastered/ putty surfaces of wall all as specified and as directed by Engr in-Charge

Material & Labour for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed by Engr in-Charge

Material & Labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weeather acrylic base paint (100 % acrylic) over one coat of cement based primer all as specified and as directed by Engr in-Charge

Material & Labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

Material & Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

Material & Labour preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified & directed.

Material & Labour preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding all as specified & directed.

Material & Labour for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint all as specified and directed

Material & Labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.

Material & Labour for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Material & Labour for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified

Material & Labour for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs complete all as specified

Supply & Fixing 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.

Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

Supply & Fixing 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified

Supply & Fixing froasted/Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified

Material & Labour preparation of paved/chequred floor area and applying one coat indigo floor paint or equvalent all as specified and directed.

Supply & Fixing in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Design & pattern as approved by GE.

Supply & Fixing in brass Key lock round knob type(locking mechanisum) easy push button facility for locking inside suitable for all doors all as specified and as directed

Supply & Fixing in repairs rimless bowl with side flush cistern for couples water closet UF soft close seat cover,hinges,single flush cistern, fitting and fixing accessories, size 420x710x810mm, P or S trap complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs Water Closet Cistern and seat cover etc, hinges,single flush cistern, fitting and fixing accessories, size 380x700x820mm, P or S trap complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs floor mounted coupled water closet bowl for coupled WC with UF soft close seat cover, hinges fixing accessories set and accessories set, size 380x660x765mm, P or S trap complete all as specified and directed by Engr-in-Charge.

Anil Industrial Corporation (BID ID -3068058)

RAMESH ENTERPRISES (BID ID -3069653)

Nilesh Construction (BID ID -3069713)

Pragathi Infrastructure Co. (BID ID -3071388)

SHREE JAGDISH FURNITURE CO. (BID ID -3069261)