PROVN OF ONE TOILET BLOCK NEAR DEPOT MAIN GATE AT CAD PULGAON

Amount

Surface dressing n. exc 15 cm deep, getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, n. exc.1.5m wide and n.exc. 1.5m deep for foundation n.exc.10 Sqm on plan and getting out soft/loose soil complete all as specified and as directed.

Excavation in trenches, n. exc.1.5m wide and n.exc. 1.5m deep for foundation n.exc.10 Sqm on plan and getting out hard/dense soil complete all as specified and as directed.

M & L for Cement concrete type D2(1:4:8) using 40mm graded stone aggregates as in foundation lean concrete complete all as specified and as directed.

M & L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work fly ash brick with old size brick straight or curved on plan to any radius in half brick thick walls, built in 1:4 complete all as specified and as directed.

Rendering for 10 mm thick with CM 1:6 on fair faces of brick work to be finished even and smooth (without using extra cement) complete all as specified and as directed.

M & L for 15mm thick rendering on fair faces of brick masonary or concrete surfaces in cm 1:4 finished even and smooth without using extra cement for external surface of wall complete all as specified and as directed.

M & L for 5 mm thick rendering in CM 1:4 on concrete surface as in ceiling surface finished even and smooth without using extra cement complete all as specified and as directed.

Forming V grooves in plaster n exc 10mm deep and n exc 10 mm on face complete all as specified and as directed.

Supply only liquid water proofing compound all as specified and as directed

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing of surplus excavated material to a distance n.exc 50 mtr and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M & L for moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed.

M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base floor finised etc complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and as directed..

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty squares not exc 0.5 Sqm in each pane complete all as specified and as directed.

Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10 cm width or girth including preparation of new steel surfaces all as specified and directed by EIC.

M & L for mild steel TMT bars 10mm dia and over cut to length bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips quality coinforming to IS complete all as specified and as directed.

M & L for mild steel TMT bars 6 to 8 mm dia cut to length bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips quality coinforming to IS complete all as specified and as directed.

M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps,spacers and binders complete all as specified and as directed.

M & L for three coats of white wash on newly plastred wall and concrete surfaces including preparation of surface complete all as specified and as directed.

M & L for three coat of white wash on on ceiling including preparation all as specified and as directed.

M & L for two coats of cement base paint in camouflage pattern over newly plaster/concrete surfaces of wall any description of plastered surface including priming coat of white cement complete all as specified and as directed as per manufactures instructions.

M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregates as in bed block provided for hold fast or at similar work complete all as specified and as directed.

M & L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregates) for plinth beam all as specified and as directed.

M & L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregates) for slab all as specified and as directed.

M & L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregates) for chajjas all as specified and as directed.

M & L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregates) for lintels, roof beams all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) with rough finished surfaces complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs also splays between floors and beams complete all as specified and as directed.

Use and waste formwork to side of concrete foundation,plinth beams,base of column,side of column for rough finishes surfaces of concrete complete all as specified and as directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finishes surfaces of concrete complete all as specified and as directed.

Use and waste of form work to edges of concrete flat horizontal or sloping and similar work exc 10 cm but n. exc 20 cm wide for rough finished surfaces complete all as specified and as directed.

M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm grade stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors over 15 mm thick cement screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

M & L for glazed coloured ceramic tiles 450x300x7mm thick as in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick plaster in CM 1:4 complete all as specified and as directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and as directed.

S & F factorry Made Solid PVC Moulded Door Shutter, with particle Board Core 28 to 30 mm thick (stiles), with 2,4,or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm Plain colour PVC sheet on back face, suppplying & fixing in frame at site as per specification and drawing complete all as specified and as directed.

S & F MS door framed work as in door or gate of angle or other section Fe-290 (Gde E-165) with gusset plats, rails, braces etc complete drilled for fixing for steel sheeting or other covering in door etc including nut and bolts required prepared for hanging with steel doors fitting and hanging on existing pintels etc complete all as specified all as specified.

S & F mild steel flat iron as in holdfast embedded in PCC block with splitted ends and in braces in diagonals, hand made sliding bolts, clamps hooks and similar small work comforming to Fe-290, Gde-E-165 including drilling hole fixing to steel doors with nuts and bolt all as specified and as directed.

Supply & Fix 1.00 mm thick MS sheet plain black steel door and similar work cut to size, holes, punched including round headed screws with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as requried all as directed.

M & L for providing cement concrete Type B0 1:2:4 using 12.5 mm stone agg in roof kerbs or mud stops, rounded or chamfered on edges all as specified and as directed.

S & F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S & F 150mm aluminium anodised barrel tower bolts of extrubed section complete all as specified and as directed.

S & F extruded 125mm aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as spectfied and as directed.

S & F rotational moulded three layers polyethylene water storage tank capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F 20mm bore ball brass valves high pressure with polythene float ball and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S & F 20 mm bore Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M & L 20 mm bore of pipe cutting existing steel tubing for alterations or addtions (Each cut measured) all as specified and as directed.

S & F of 15mm bore steel tube medium grade galvanised, with all fittings fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S & F of 20mm bore steel tube medium grade galvanised, with all fittings fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S & F fancy type bib taps, cast copper alloy 15 mm bore, screwed down, screwed both ends for iron pipe or for union complete all as specified and as directed.

S & F fancy type stop valves, cast copper alloy 15 mm bore, screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed.

S & F vitreous china water closet squating pan Orissa pattern 580 x 440mm white with integral foot rest with CP brass health faucet complete including lime concrete bedding complete all as specified and as directed.

S & F vitreous china water closet pan (Pedestal pattern) white with CP brass health faucet complete all as specified and as directed.

S & F Plastic water closet seat, cover white , closed pattern with flat bottom and cover anf mild steel chormium plated or alu inised hinging device etc complete all as specified and as directed.

Supply and fixing PVC valveless, syphonic action type, flushing cistern, low level of 10 ltr capacity, white with inlet, ball valve, float and handle including brackets the exposed surfaces of brakets shall be painted with two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed.

S & F vitreous china wash basin, flat black white, size 550 X 400mm including cutting for and pinning in for bracket and 15mm bore CP Pillar tap 32mm dia CP waste coupling, 32mm dia PVC waste pipe and connection to drain pipe complete all as specified and as directed.

S & F vitreous China Urinal, Half stall type, white including flush and waste pipe suitable for Urinal complete all as specified and as directed.

S & F push tap brass comium plated for 15mm suitable for urinals complete all as specified and as directed.

S & F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) complete all as specified and as directed.

S & F PVC Connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joint and fixing adhessive with all fittings, including all fixed to walls complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in tranches or in floors with all fittings complete all as specified and as directed.

PVC (SWR) 'P’ trap 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) cowls 110 mm dia complete all as specified and as directed.

S&F PVC(SWR) Bends (any radius) 75 mm complete all as specified.

S&F PVC(SWR) Bends (any radius) 100 mm complete all as specified.

PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

S & F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S & F soap dish vitreous China white, approximate size 160x160x90 mm fixed to plugs with choromium plated brass screw complete all as specified and as directed.

M & L for Granite (of any type) stone slab 20 mm thick in urinal partition and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in urinal partition and other similar situations etc complete as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick or concrete surface in cement mortar 1:4, finished even and smooth without using extra cement including mixing of liquid water proofing compound as per manufacturer instruction as in roof top surface when the concrete is green. Note: Liquid water proofing compound shall be measured and paid separately.

M&L for water proofing treatment to non-accessible roof slabs by applying one coat of bituminous primer conforming to IS-3384 @ 0.30 litres/sqm and laying Atactic Polypropylene (APP) modified membrance, reinforced with non woven polyster, of minimum 3.00 Kg/sqm, minimum 3mm thickness with minimum 100 mm side overlaps and 100 mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete all as specified and as directed.

Excavation over area's n. exc. 1.50 mtr deep & getting out in soft/loose soil etc complete as specified and directed.

M & L PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate), 75 mm thick as in sub base etc complete as specified and directed.

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) finished even & smooth w/o using extra cement including necessary form, laid in alternate bays complete 75 mm thick etc complete as specified and directed.

Forming constuction of (dummy) joints 65 mm deep and 10 mm wide filled with sealing Grade "A" compound etc complete all as specified.

Screed bed or bedding layers of mortar 15 mm thick in CM 1:6 for laying of floor etc complete as specified and directed.

Material and labour for cement chequered cement coloured tiles of 200 x 200 x 25 mm thick (Rubber Finished) ISI Mark of Make Raj Tiles or equivalent, jointed and pointed with grey cement and pigments in floor etc complete as specified and directed.

M & L for plain cement concrete 1:3:6 type C2 (using 40 mm grded stone aggregate) as in foundation of manhole complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggr) as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore SGSW pipe complete all as specified and as directed.

M and L Salt glazed stoneware (SGSW) grade ,A, drain pipe 150mm internal dia laid in trenches on concrete bed and jointed complete all as specified and as directed.

M & L for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in benching and surface channel of manhole complete all as specified and as directed.

M & L plain cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in coping including form work complete all as specified and as directed.

M & L precast RCC 1:2:4 type B1 ( 20 mm graded stone aggregate) as in manhole cover including form work complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel using extra cement up to 30 cm inner girth complete all as specified and as directed.

RCC hume pipe septic tank 25 users of dia 900 mm of length 2430 mm and as available with manufacturers near to the dimensions, the excavation and earthwork in any type of soil, the PCC bed 100 mm thick (1:4:8) type D2 (using 40 mm graded stone aggregate), vent pipe shall be CI pipe 100 mm dia with vent cowl and inlet and outlet pipe and inspection door as per manufacturer's instructions all as specified and as directed as per TD drawing No TD/STR/10 dt 12.09.01, sht No - 1/1

Sokage wells excavation in any type of soil foundation in PCC 1:3:6, brick walls of honey combed and solid including intercepting chamber, screen chamber brick work in CM, RCC cover slab in 1:2:4 filling with brick bats complete of size 3.00M dia X 3.00 M deep as per TD drawing No CEBZ/TD/78/2011 of sheet 1/2 to 2/2 dt 01/08/11.

M /L PCC 1:3:6 type C1 (Using 40 mm graded stone aggregate) as in Coping 75 mm th. finished even & smooth w/o using extra cement etc complete as specified and directed.

M&L point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLS cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC/Sunken box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the following:-

One light point controlled by one switch one way

One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

M&L switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed .

S&F socket outlet 5/6 pin type,5 Amps, 240 V complete all as specified and directed.

S&F ceiling rose surface type with 3 terminals complete

S&F LED tube light fitting 1 x 18/20 watt (LED lamp and batten) surface and wall mounted with polycarbonate housing & integrated electronic driver complete set all as specified and directed by Engr -in -charge . Cat No LHEXBQP7IN1W018 of Havells and eqvt in Philips / Wipro

S&F of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 4 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces. Make : Havells/legrand/Schneider

S&F of MCB SPN 20 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series. Make:Havells/Legrand/Schneider

S&F of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series. Make:Havells/Legrand/Schneider

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver. Make: Havells, Bajaj, Crompton

Material and labour earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nut check nuts and washers of galvanised iron or steel, earth lead protection pipe 15mm bore GI medium grade, watering pipe 20mm bore GI medium grade all as shown in electrical plate No 3 connected to main switch distribution board complete and testing on completion all as specified and directed by Engr-in-Charge. Note : (i) The unit rate shall also includes for excavation earth work, type of soil, pit in PCC 1:3:6 type C1 funnel with watering pipe from earth test point upto equipment to be earthed, RCc 1:2:4 type B1 cover for earth chamber, 50mm thick with 8mm dia for steel 150mm C/C both ways and 6mm dia MS round bars at handles of cover slab all as specified in addition to sl No 1 (a) to (e) and 3 of under sub heading earthing as specified on ser page No 441 of SSR Part-II-2010.

Supply and lay, dry river sand filling in trenches to required width at bottom and top of cable as cable cushioning including spreading, leveling, watering and consolidation complete all as specified and directed.

Supply and lay un-reinforcement precast concrete cable cover, class LV, type 1, flat of size 250 X 150 X 40mm for LT cable and laid dry in trenches over underground cables complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia (Cable Protection Pipe)

Supply and lay pipe galvanized , "Medium Class", including fittings 20 mm.(3/4'') dia laid in trenches complete all as specified and as directed.

SHREE CONSTRUCTIONS

RAJ ENTERPRISES

M/S Ramakant Chourasia

M/s JAYPEE ENTERPRISES

M/S L M Chourasia

Bidder Name

M/S L M Chourasia

RAJ ENTERPRISES

SHREE CONSTRUCTIONS

M/S Ramakant Chourasia

M/s Dara Constructions, Pulgaon

M/s JAYPEE ENTERPRISES