NieQ02/EE/MED/GTA/2020-2021

Amount

Additional Work of Auditorium: (P.W.D Building Schedule) Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (1:3:6 in proportion )

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (River Bazree)

Plum concrete work with 40 % cement concrete with 30 mm down graded stone metal and 60 % stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any (1:3:6) proportion.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f)25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection (a)For works in foundation, basement and upto roof of ground floor/upto 4 m Tor steel/Mild Steel

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (iii)With 1:3 cement mortar with 20 mm thick plaster.

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.

Brick work with 1st class bricks in cement mortar (1:4) (b)In superstructure, ground floor.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A)Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m Area of each tile above 0.09 Sq.m (i) Coloured decorative

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (i) Coloured decorative

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor. (I)With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.9A0Deep Colour & white

Supplying and laying true to line and level 20 mm / 25 mm.thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thick cement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precast tiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm.high skirting with the same tiles flushed with the inside surface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer-in-charge. (Levelling if necessary may be paid separately) . (b) for 25 mm. thick precast tiles (cement 14.6kg/Sq.m for underlayer.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. ISMB Series (125mm X 75mm). For Dormetory floorings

Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) Sal : Siliguri.

Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete : In ground floor (Sal Local) (iii)50mm thick planks. (b) Sal Siliguri.

P.V.C- False Ceiling : Providing False Ceiling made with framework of steel tube of 40mm x 20mm of not less than 18 gauge,the long and cross section will be welded with each other 1000mm to 1200mm apart the entire framework will be fixed in wall using rawlplug or gutties or screws etc. and suspended from ceiling with M.S flat 19mmx3mm as necessary,the entire frame will be painted with red oxide. PRINTED LAMINATED P.V.C Section 150mm x 12mmx 1.00mm (+/- 0.01mm) of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P.V.C Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting,fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineerin- Charge .In ground floor.

Plain and finished timber planks in partition, shelves etc. fitted and fixed complete as per design (butt joints) in ground floor. (iii)25mm thick planks (Sishu/Champ/Badam/Gamar/Bhola/Mogra/H allak)

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). (ii) 4 mm thick Windows

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sai:Siliguri

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings In ground floor. (i)50mm thick shutters with 25mm thick panel of size 30to 45 Cm. 1st class best Indian teak.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings In ground floor.(iii) 35mm thick shutters with 19mm thick panel of size 30to 45 Cm.(Sishu/Champ/Badam/Gamar/Bhola/Mogra/H allak)

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor. (i) 40mm thick shutters. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately). 40mm X 6mm, 250mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mx 75mm. X 3.50 mm

Anodised aluminium skeleton bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 204/74) fitted and fixed. (ii) 225mm long x 12mm dia. bolt.

Anodised aluminium grip handle with base plate of approved quality fitted and fixedcomplete with base plate. (iii)b 300mm grip x 20mm dia rod x 50mm plate x 3.2mm thick

Iron catch hook of approved quality fitted andfixed to shutter and chowkat. (f)(12mm dia x 600mm long.)

ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (300 mm long)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall. (ii) 4 mm thick Windows

a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (ii) Grill weighing above 16 Kg./sq.mtr and above

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete i)for roof truss works

Supplying, fitting & fixing 1.5mm thick Plain Corrugation Polycarbonate clear sheet made of national brand, excluding the supporting frame work, fitted and fixed with 10mm dia x 55mm Self-driving screws, EPDM washers and putty complete with 150mm end lap and one corrugation minimum side lap complete as per specification & direction of Engineer - in - charge including materials, labour, taxes and all other incidental charges. (Payment to be made on area of finished work ).

(b) Priming one coat on timber or plastered surface with oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface with super gloss (hi-gloss) iv) Two coats( with any shade except white)

(a) On steel or other metal surface with super gloss (hi-gloss) iv) Two coats( with any shade except white)

French polishiung to wood work including preparing surface ( ordinary gloss) (a) On new wood work

[Sanitary & Plumbing Work] : Supplying, fitting and fixing brass ferrule including connection with P.V.C. pipe of approved make upto 450 mm long with plumbing joint,brass over C.P. coupling at both ends, with cap and lining complete in all respect, including cutting trenches in all sorts of soil and filling up trenches as per direction of the Engineer-in-charge. i) 25mm dia

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For exposed work 25mm dia

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (b) For Concealed work 15mm dia

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (v) 25mm dia

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

Wash Basin (b) (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (ii) 550 mm X 400 mm size

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 750mm long

Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (b) With 'S' Trap

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (iv) Bestolite (Solid type) white

Supplying ,fitting and fixing liquid soap container. (a) Cromium plated.

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying,fitting and fixing towel rail with two brackets. (a) C.P over brass

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single socketed 3 meter length (b) 110mm

(B) Fittings (ii) Plain Tee

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials (A) Above ground (ii) 110mm dia

Construction of Water Fountain and Allied Works on South End(Entrance) of Auditorium. Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (1:3:6 in proportion )

Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications,submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] (a) M 20 Grade (ii ) N.B. Variety (Stone Metal)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersec (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (iii) With 1:3 cement mortar (a) 20 mm thick plaster

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.

Musical Dancing Fountains having 6 effects , nozzles made of brass/gunmental with crome plated with programmable colour changing HI power LED Based lights. Make - BEC Double box with center A Rating Jet 40mm dia; 3Ft dia Ring with 16 nos adjustable Brass heavy spray jet Nozzles for water effect upto 8 ft( Fountaineers/BEC make)

Pyramid Fountain: Supplying 9 nos of 32 mm dia single jet nozzle (Brass/Gunmetal) for Pyramid water effect(Fountaineers/BEC make)

Butter Fly Effect: Supplying 5 Ft dia ring SS 304 with 32 nos adsjustable Brass heavy duty spray jet nozzles for water effect upto 5 ft.(Fountaineers make)

Dom Fountain: Control Console unit with Thyrister relays & other control gadget suitable for 5 channel output with distributed load.(Fountaineers/BEC make)

Smoking effect : JM 12 Mist Maker Fogger Fountain device (Fountaineers/BEC make)

Peacock Tail Nozzles or Flower Jet Nozzle (Brass/Gunmetal)(Fountaineers/BEC make)

Programmable and Auto sensing musical Console to control the fountain pattern and colour of LED Lights with DMX colour blender Controller Make- BEC with USB/I pod, DVD player with musical consolle with Amplifier with two sets of Speaker columns of rated wattage(Ahuja) with provision for Auto / Mannual function.

Waterproof Programmable colour changing 96R or 90R LED type Lights of ABS boby with SS top with each Nozzle of 12V. Make - BEC/Edison/Cree made of Die cast stainless steel SS 304 grade fitted with LEDs .

Mono Sub-mersible Pump of 10HP/7.5 kw with 20-32 amp Relay with AC contractor Coil three Phase, Energy efficient with Steel Shaft/Thrust bearing (Make- Kirloskar/ Crompton).

Online Cartage Filter For Above Pump suitable for 10Hp Submersible Pump;7.5Kw( Crompton/Sharplex/L&T make)

Solenoid Valve Bank with Distribution header and NRV, 40 mm Reflex valve( Zoloto) 4 nos;GM full way valve (Zoloto ) 5 nos; GM Ball valve ( Zoloto ) 18 nos complete with installation ,valve holding boxes of SS Sheet of 2mm thickness to make them water resistant complete with all bushes,taflon,epoxy,valve fittings.

40 Watt outdoor speaker (04Nos.)of Ahuja make with 1 no. 250 watt amplifier of Ahuja Make.

RGB control for LED light with DPMCB 63 Amp 10K L&T / Merlin Gerin/ GE ; DOL Starter L&T with Water level Controller ( Kartar make )

Complete plumbing required for the fountain with GI Pipe (Jindal M) / UPVC Pipes Supreme/ Prince with all bending/jointing accessories complete with laying as per Drawing including necessary Control valves with leak test and proper earthing.(Excluding inlet & Drain.)

Complete Electrical work required for the fountain including Pump., Transformer & Lights (Within 10 Mtr. From water Body)with Constant Voltage Driver ( CVD ) for lights 12 V ) suitable for 96 R or 90 R LED lights with Slave Unit ( L&T) for lights with PVC Sheathed copper conductor submersible flat cables of size 2.5 sqmm( Anchor /Havells) as required complete in all respects.

Installing Testing, Commissioning of musical fountains complete in all respects as per Drawing and Specifications of the Engineering Department.

CAR PARKING: Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. Parking area

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (1:3:6 in proportion )

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material.[Border concrete if necessary to be paid separately].Note: Sub-grade CBR should not be less than 5 (c) 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (ii) Coloured Decorative

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) To separate parking and garden within a garden At top of Fountain

kitchen , pantry, & store: Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. Parking area

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand Drain

(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (1:3:6 in proportion )

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M 20 Grade (ii) N.B.Variety (Stone Metal)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor steel/Mild steel

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25mm to 30mm thick wooden shuttering as per decision and direction of Engineer-in-charge.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor

125 mm thick brick work with 1st class bricks in c.m 1:4 in ground floor. Internal G.F

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (iii) With 1:3 cement mortar (a) 20 mm thick plaster

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sal : Siliguri.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (i) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm Champb) Sishu, gamar...

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor. (ii) 40mm thick shutters. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall). (ii) 4 mm thick

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (ii) Grill weighing above 16 Kg./sq.mtr and above.

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] All floors of kitchen, store& pantry.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coat i) Water based interior grade Acrylic Primer i) Water based interior grade Acrylic Primer

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (b) Two Coat

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm.

Anodised aluminium skeleton bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 204/74) fitted and fixed. (viii) 600mm long x 12mm dia. bolt.

Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete (iii) 300mm grip x 20mm dia rod x 50mm plate x 3.2mm thick.

Iron catch hook of approved quality fitted and fixed to shutter and chowkat. (c) 10mm dia x 300mm long.

ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

a) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface :iv) Two coats (with any shade except white)

a) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) iv) Two coats (with any shade except white)

Landscaping including Supply of Garden Chairs Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. Parking are

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (1:3:6 in proportion )

Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] (ii) 30 mm. thick

Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc. viii) China palm of leaves 4-5 in earthen pots size 25cm

GARDEN CHAIRS: Garden Bench Stainless Steel with Perforated Back rest and Seat 1800 mm long Three Seater with Hard Chrome Plated Framework, complete fitting and fixing in position.( Model No IS-VF002 Make Pioneer/Alfa/Godrej equivalent).

Acoustic Interior Fit-Outs for Auditorium Fibre Frill Acoustic Panels: (Times/Chisel/Himalayan ) NRC of 0.86 Fire Retardant/9mm thick with Matt surface and a Density of 200kg/sq mtr certified by the Indian Green Building Council with Fire Rating of Euro Class B and ASTM E84-08 in diferent colours and patterns fixed and installed in position. Note: Acoustic insulation as in-fill in the framework to hold Fibre Frill Aouistic Panels should be 50mm thick Hiloft Polywool which is 100% eco-friendly , 0% health hazardous ,Made from recycled materials,100% reusable with 0% Detroit features compared to glass- wool (Hiloft Polywool 50mm)including cost of all materials and Installation at locations as per the Direction of the Engieering Department. Application Area: Main side walls/Stage walls/

Hiloft Polywool Thermal Bonded Polyster Insulation with Aluminium Foil 50 mm thick, with 98% Compression recovery, completely Inorganic and Rodent free with Zero flame spread fire retardent to 150 degrees Celcius with NRC of 0.80 and thermal insulation coefficient of 0.03 W/mK. 100% Eco friendly, 0% halth hazardous, made from recycled materials, 100% reusable with 0% Detroit features. Application Area: Above Existing Ceiling in Auditorium Main Hall

Hiloft Polywool Thermal Bonded Polyster Insulation with Aluminium Foil 50 mm thick, with 98% Compression recovery, completely Inorganic and Rodent free with Zero flame spread fire retardent to 150 degrees Celcius with NRC of 0.80 and thermal insulation coefficient of 0.03 W/mK. 100% Eco friendly, 0% health hazardrous, made from recycled materials, 100% reusable with 0% Detroit features placed and fitted/fixed on Frameork of SS Wire Netting just below the Existing CGI Sheet Main Hall Roofing to Neutralise Rattling Noise during Heavy Monsoon.(Times / Supreme/Chisel)including cost of all materials and installaton as per the Direction of the Engineering Department.

Acoustic doors: Providing & Fixing of "Acoustic Doors" made using hardwood door frames 50 mm thick having Hiloft Polywool Thermal Bonded Polyster Insulation with Aluminium Foil 50 mm thick Infill within the Door Frames bound in SS Net of fine mesh with 98% Compression recovery, completely Inorganic and Rodent free with Zero flame spread fire retardent to 150 degrees Celcius with NRC of 0.80 and thermal insulation coefficient of 0.03 W/mK. 100% Eco friendly, 0% halth hazardous, made from recycled materials, 100% reusable with 0% Detroit features alongwith fixing of 12 mm thick Waterproof Ply( Green/Century) on either side ,finally finished with Fibre Frill Acoustic Panels 9mm thick to attain required NRC of 0.80 and a sound reduction value of Rw=44dB and FD30 Fire Rated with Acoustc Door seals at th Bottom & with the required Door hardware's & Fittings as approved by the EIC.

Floor Carpet Synthetic Wooven & Texturised 6mm thick (Make: Unitex/Birla/Welspun/Jupiter in different colour; Elegant design;Installed with Moisture proof underlay of 8 mm Waterproof Synthetic Profile for spongy feel with complete Fitting , Fixing/ Pasting and Finishing including all labour charges in any type of location Wood/ Cement with proper cornering and perfect edges( Colour: Red/Maroon/Grey/Bi colour) as per Direction of the Engineering Department. Appliction area: Entire Hall Floor & Front of Stage for Acoustic & Warmth and Aesthetic look.

Gymnasium Layout and Setting with 6/10 Multi Station GYMNASIUM EQUIPMENTS: a.PECK DECK b.HI LAT c.HACK SQUAT d.SEATED CHEST PRESS e.LEG PRESS f.LAT ROWING g.WRIST CURL h.T- BAR(WITH ROUND PLAT) i.ABDOMINAL BOARD j.CHIN UP (Rate is inclusive of GST)

PECKDECK(BUTTERFLY) MACHINE(MAKE:NELCO /COSCO /POWERMAX )

TREADMILL(CARDIO WORK OUT)WITH SMART RUN FUNCTION AUTO INCLINATION MOTORISED/AUTO LUBRICATION(2.0HP)(MAKE:NELCO /COSCO /POWERMAX ).

MAGNETIC RECUMBENT EXERCISE BIKE/FLYWHEEL SYSTEM WITH 6 KG TWO WAY WITH 8 LEVEL TENSION/MAX USER WEIGHT 120 KG(MAKE:NELCO /COSCO /POWERMAX ).

CABLE CROSSOVER ADJUSTABLE L3700 X W890 X H2250MM(120KG) (MAKE:NELCO /COSCO /POWERMAX ).

LEG STRETCHING MACHINE UNISEX WITH FOAM SEAT MATERIAL. (MAKE:NELCO /COSCO /POWERMAX ).

ATHELETE BENCH 10 SEATER N2006 AB10 (MAKE:NELCO /COSCO /POWERMAX ).

DRINKS/REFRESHMENT CART N 2006 DFC (MAKE:NELCO /COSCO /POWERMAX ).

JUDGES TIME KEEPERS STAND N 2006 JSC (MAKE:NELCO /COSCO /POWERMAX ).

Supply of Office Furnitures and Table Tennis Board: (Ornamental Chairs ) Lacquered(Rosewood/Black/Red)withPVAcrylic frame and Cushioned Seat with PU Foam and Velvet Upholestry(Make Pioneer/Supreme/Nilkamal)L56cm W 56cm H 81.5cm

Executive Chairs High Quality with Headrest height and angle adjustment, with Lumbar support with five wheels, SS Base 304 grade High tensile steel with Hard Chrome finish with Arm pads, odour resistant upholestry, Torsion Bar mechanism, any position locking,High back with Push back mechanism and Syncro Kee tilt system( Model IS-C012 Make Pioneer/Alfa/Godrej Equivalent ).

Wooden Conference Table (13-24 seater) framework made of Teakwood and Top of wit 38 mm Grade 1 Waterproof Plyboard with Prelamination with 2mm thick Laminate(Greenlam/Deco), Melamine PU Wood Polish on all wooden surfaces with Electrical Ducts for Cables & Microphones Complete in all respects.(Size 16' x5'; Model No IS-C005 Make Pioneer/Alfa/Godrej Equivalent).

Ordinary Executive Chairs with Push Back and Lever locking mechaniasm with Chrome base and Torsion bar with PU Armrest Model No IS-C036 Make Pioneer/Alfa/Godrej Equivalent)

Ordinary Chairs with Nylon Base and Powder Coated Frame with PP Armrest and cushioned seat with velvet cloth. Model No IS-C0138 Make Pioneer /Alfa/Godrej Equivalent).

Office Table 6' x 3' with dimension 1800 x 900 x 760 mm made of waterproof/Termite proof Prelaminated and treated Boards with Side Locking drawers and footrest with easy flow drawer channels and branded locking arrangement with support Nylon blocks and provision for Electric Duct. Rosewood/Walnut/Oak Model No IS-CT01 with 12mm Tempered Glass Top Machine Moulded for smooth cut free edges. Make Pioneer/Alfa/Godrej Equivalent.

Office Steel Almirah 20gz made of CRC sheet, sand blasted for smooth finish, painted withlong life metallic paint with Chrome plated SS Handle and locking with one inside locker of dimension 78x34x19" Make Godrej/Alfa/Pioneer Equivalent.)

Canteen Chairs with Round Pipe Chrome plated Frame with PP Arms with seat of Waterproof upholestry. Model No ISCS010 Make Pioneer/Alfa/Godrej Equivalent).

Table with Marble Top with Stand 6'X3'; 1800x900x760mm made of Waterproof/Termiteproof Prelaminated board with table top display with 16mm White marble Top with machine rounded edges mounted on table Frame. Model No IS-C004 Make Pioneer/Alfa/Godrej Equivalent).

VIP ROOM Sofa Sets(3 seater+2 nos 1 seater)76"x37"x28" with Teakwood Framework inside and Hard Chrome Rust proof Legs with High Density PU Foam Cushions 21"x22" 100mm thick draped in Best quality Velvet Upholestry with proper knitting.Model No IS-SF003 Make Pioneer/Alfa/Damro/Godrej Equivalent).

Centre Table with Glass 24"x48"x30" with Hard chrome plated Frame with Legs attached to nylon buffers with heavy SS Base with 12mm thick Tempered Glass with machine rounded edges. Model No IS-CT003 Make Pioneer/Alfa/Godrej Equivalent).

Corner Table with Drawer made of Waterproof/Termiteproof Prelaminated Board with smooth drawers proper locking with 6mm Glass on Horizontal Exposed parts. Model No ISPD006 Make Pioneer/Alfa/Godrej Equivalent).

Wooden Wardrobe 78"x40"x22" made of 19mm thick Waterproof/Termiteproof Prelaminated on both sides Boards with SS Rod hanger and safe locker inside , Double Door with Auto Hinges and Hard Chrome finish handles Rosewood/Walnut/Oak colour. Model No IS-ST010 Make Pioeer/Alfa/Godrej Equivalent).

Automatic Curtains at VIP Conference Hall with Double Set of Pipes for Dark and Light Curtains made of 32mm dia SS 304 Grade heavy Steel pipes with complete side Architectural Holders with Motorised Mechanism for both inside and outside Curtains with Remote control operation including the cost of Upholestry Curtains made of Stain resistant Imported Fabric, neatly stitched and Installed Complete in position With One Year On Site Warranty.The Motorised frame would be of Anodised SS C Channel with moving Nylon wheels for easy and smooth operation.Each Curtain Size of 2.5m x 1.2 m fiished. Make: Bombay Dyeing/Century/Bahist).

Curtains of Size 2.5mx1.2m finished made of Thick Velvet Cloth complete with Top and Bottom borders with Round SS Pipe movers at the top with Curtain folding Velcrow system. Make: Bombay Dyeing/Century/Galaxy).

Sofa for VIP seating at Auditorium (3 seater) 76"x37"x27" with Teakwood Frame and Hard Chrome plated SS Legs with PU Foam Cushions 100 mm thick High Density with Thick Velvet Upholstery Cushions21"x22" with decorative and rounded Armrest for more comfort. Model No IS-SF004 Make: Pioneer/Alfa/Godrej Equivalent.

Table Tennis Boards (Make :STAG)of Standard Specification.

Allied Beautification Works ( Installation of Idols): Idol of Goddess Saraswati with Veena moulded from FRP (Fibre Reinforced) Material; thickness 6mm customized as per requirement/size/Design.Idol size10 to 12 feet wide,14 feet high with complete fitting & Fixing at required location with Installation costs/Beautification/Weatherproof Costume/Weatherproof with Realistic Technique with all intricate and Anatomy details with Gel coat and pigment mixed Resin for the exposed surface as per the Direction and Drawings of the Engineering Department.

Idol of Globe & Eagle specially designed from high quality FRP Materials( Fibre Reinforced) customized as per Drawings/ colour/posture.Idol size of 10 feet diameter Globe mounted with the best postured Eagle of similar size to give a Wonderful and Victorious look to the surrounding environment , fitting , fixing and mounting at preferred location including all installation costs Beautification/Weatherproof Costume/ with Realistic Technique with all intricate and Anatomy details with Gel coat and pigment mixed Resin for the exposed surface as per the Direction and Drawings of the Engineering Department.

Allied Beautification Works ( Installation of murals): Wall Murals made of FRP Material ( Fibre Reinforced) 6mm thick with proper Metal Armature and base with accessories of Fibre Glass. The Depictions should project proper gesture and give a Realistic look from all angles.Murals should depict Prominent facial features where required whether Humans/Animals/Musical Instruments/Nature Scenery/Culture.Murals should be of Sandstone/Bronze/Lacquer finish with Elegant design in conformation with the Drawings/Specification of the Engineerig Department including complete cost of Installation with Weatherproof Gel Pigment Resin Painting for long life.

Supply and Laying of Synthetic Carpet with moist proof underlay: Floor Carpet Synthetic Wooven & Texturised 8mm thick ribbed( Make: Birla/Welspun/Jupiter/Heaven Carpets) Non Slip in different colour; Elegant design;Colourfast with Smooth finish Installed with Moisture proof underlay of 4mm thick Alutix( Air Bubble Insulation)with both sides Aluminium foil( Make: Alutix Insulations, Raipur, Chattisgarh)with complete Fitting , Fixing/ Pasting and Finishing including all labour charges in any type of location Wood/ Cement with proper cornering and perfect edges( Colour: Red/Maroon/Grey/Bi colour) as per Direction of the Engineering Department.

Treatment of Expansion Joints with Sealant and Filler Board: MaterSeal 930 Elastometric Sealant made of Liquid Polysulphide Polymer for Flexible Rubber Seal surface (Make: Dr Fixit/BASF/Choksey).

MaterSeal CR170/171 Primer Layer Thickness 1-2mm in Expansion Joints( Make: Dr Fixit/BASF./Choksey).

Supreme DURA Board HD 100 50mm Thick of Density 100kg/cubic metre, Water Absorpton of 0.08kg/sq mt, Thermally stable/Rot proof and Bacteria resistant( Make: Supreme)

Aluminium V-strip for horizontal portion 225 mm wide x 3mm thick to hold Expansion Joint Sealer in Place and Cover exposed surface including cost of material/labour ( Make: Indal/Hindalco/Jindal)

M/S HIMALI GURUNG CONSTRUCTION COMPANY

HIMALAYAN CONSTRUCTION