Consruction work of community center at Bhatta road Benhajhabar under Arya Nagar Khalasi Line ward-10 Zone-4.

Brick work with common burnt clay (non modular) bricks of class-150 In foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

Construction of granular sub base (GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on prepared surface, mixing by mixin place method with rotovator at OMC and compacting with viberatory roller to achieve the desired density as per clause

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (55 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for faxing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for faxing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/double glass panes and silicon sealant shall be paid separately) Note: For uPVС frame, sash and mullion extruded profiles minus 5% tolerancein shall be made. dimension Le. in depth & width of profile shall be acceptable.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm). made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9±0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) (Single Shutter Openable Window)

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar

DOORS: the insulated PUF pannel doors with necessories such as hinges, locks, will be provided of size 900X 2100 mm. including supply of all material, labour and T&P etc. required for proper completion of the work and as directed by the Engineer in charge

PORTA CABIN:Supply, Fabrication and Erection of Porta Cabin of size 12' X 32 X (9-10) including supply of all material, labour and T&P etc. required for proper completion of the work and as directed by the Engineer in charge. Comprising of CUSTOMISED WALL: the room wall shall be constructed of 50 mm thick PUF insulation and density of 40 kg per CuM lined with pre-quoted Gl cutside inside of CAM locking along with the joints, including supply of all material, labour and T&P etc. inclusive of under ground wiring and S.S. pipes required for proper completion of the work and as directed by the Engineer In charge

CUSTOMISED ROOF: the roof shall be constructed with 30 mm thick pannel with water proof resistance technique so that water can not come inskie of the shelter, including supply of all materiet, labour and T&P etc. inclusive of under ground wiring and S.S. pipes required required for proper completion of the work and as directed by the Engineer In charge.