Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹36.2 L+₹1.7 L (4.84%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹37.8 L+₹3.3 L (9.51%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹39.3 L+₹4.8 L (14.0%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹40.1 L+₹5.6 L (16.3%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47.8 L
EMD Value
₹95,600
Closing Date
5 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
PETTY REPAIR WORKS IN ZONE A IN DRDO TOWNSHIP UNDER AGE B/R-I, KANCHANBAGH
2022_MES_547093_2
GE I KBAGH TOKEN 37 OF 2022 2023
Open Tender
Civil Works
Item Rate
270 days
Hyderabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹95,600
Yes
20 Oct 2022
23 Sept 2022
7 Oct 2022
23 Sept 2022
5 Oct 2022
30 Sept 2022
23 Sept 2022 - 28 Sept 2022
Amount
Attending day to day complaint related to carpenter works like door easing, door repair, cup board repair, /glass pane replacement of hardware items/mirror/glass shelf etc.by deploying carpenter and helper complete all as specified and as directed.
Attending day to day complaint related to plumbing works like repair to leakages of bib taps/stop cocks/gate valves/pillar cocks and like, minor, plumbing repair/replacement of sanitary fittings/ plumbing fittings etc by deploying plumber and helper complete all as specified and as directed.
Attending day to day complaint related to cement works like repair to floors/ wall plaster in patches etc. area nexc 0.5 sqm each complaint by deploying mason and helper
Attending day to day complaint related to any type of welding works n.exc 2.5cm in length and thick of metal to be welded n.exc 6mm thick like welding to steel frame works/ hinges/ glazing bars etc. by deploying welder and mazdoor. Note:- Welding rod machine misc required is deemed to be included in the quoted rates.
Notes for Ser item Nos 1 to 4 :- The quoted rate of contractor shall comprise the following :- (i) Contractor shall provide sufficient skilled and unskilled manpower on requirement basis as directed by engineer incharge previous day for attending and completing the complaints based on the quantum of complaints (ii) Complaint cell for receiving complaints from users shall be opened by the contractor from 09.00 am to 5.00 pm at MES service centre of DLRL kanchanbagh in AOR of AGE B/R-III under GE (I) R&D Kanchanbagh. The complaints related to carpenter works, plumbing works, cement works and welding works against serial item Nos 1 to 4 shall be completed within 72 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/cmplaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. A separate register shall be maintained for recording the same and shall be signed by both the contractor or his authorised rep and Engr-in-charge.
(iii) : For each complaint a separate docket slip shall be prepared by the contractor/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, docket slip shall be submitted to concerned executive on the date of register of complaint, which shall be got signed from the occupant and shall be produced at the time of payment to be made to the contractor. (iv) : Format of docket slip and complaint register which shall be kept in complaint cell are attached as per Appendix 'E' and Appendix 'F' of tender documents. The cost of docket slips and complaint registers etc. shall be borne by the contractor and cost thereof shall be deemed to be included in quoted rates by the contractor against respective items of schedule 'A'. The complaint slip shall be prepared by the contractor or his authorised rep and handed over to the tradesmen and necessary entry shall be made in the complaint register and will be handed over to to concerned JE / the Engr-in-Charge next day. Contractor shall maint seperate register for lodging the complaints and the same shall be produced to concerned JE / Engr-in-Charge on next day.
(v) : Necessary transportations, tools, plants, ladders, etc. including nails, screws, PVC washers for bib taps/ stop cocks/ pillar cocks, cotton thread, Jumper valves, white lead, flush washers, rawel plugs and other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'. (vii) : Materials mentioned against serial item Nos. 5 to 50 hereinafter required for execution of complaints shall be supplied by the contractor and paid separately under respective items of schedule 'A' as supply only.
Supply only Brass spindle suitable for 15mm dia CP tap/CP stop cock (short body/ long body)/CP pillar cock/Brass bib tap.
Supply only PVC waste pipe 32mm dia plain (Make : Prayag, Symet) of standard length/size suitable for WHB and steel sink.
Supply only PVC waste pipe 40mm dia plain (Make : Prayag, Symet) of standard length/size suitable for Urinal and steel sink.
Supply only CP waste coupling, 32mm dia bore (Make: Prayag, Prima, Jainko, Parko) suitable for wash basin and steel sink .
Supply only CP waste coupling, 40mm dia bore (Make: Paryag, Prima, Jainko, Parko) suitable for wash basin and steel sink .
Supply only PVC internal fitting of low level flushing cistern (Make Prayag, commander, Parry ware, Supreme )with syphon, handle lever etc complete kit.
Supply only PVC syphon kit for PVC low level flushing cistern ((Make Prayag, commander, Parry ware, Supreme ) with syphon, handle lever etc complete kit.
Supply only PTMT standard bib tap 15mm bore dia, any colours, screwed for iron pipe . (Minimum weight 90gms).
Supply only Stop cock high pressure of PTMT of size 15mm bore any colour, (minimum weight 90gm) make Prayag, Symet.
Supply only PVC seat cover white in colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device (for EWC / Anglo Indian type WC).
Supply only CP towel rail 60cm long with brass screw and cleats Make Prayag, Symet.
Supply only CP waste coupling, 100mm dia bore suitable for kitchen sink (Make: Prayag, Prima, Jainko, Parko) suitable for steel sink .
Supply only M-seal in 100 grams packet.
Supply only PVC connections 15mm size with PTMT nuts of length 450mm
Supply only PVC connections 15mm size with PTMT nuts of length 600mm
Supply only 15mm dia GI fittings ( nipples, elbows, reducers, Tee, sockets, unions and tank nipples etc )
Supply only 20mm dia GI fittings ( nipples, elbows, reducers, Tee, sockets, unions and tank nipples etc ) complete all as directed.
Supply only health faucet CP brass for 15 mm dia pipe with 1.25 meter long flexible tube and wall hook
Supply only two way CP brass Bib taps 15mm dia with capstan head and flange
Supply only 15mm dia CP cast copper alloy pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts.
Supply only 15mm dia angle cock fancy type, cast copper alloy, chromium plated screwed down high pressure with crown or capstan head.
Supply only 15mm dia stop cock fancy type (Consealed type), cast copper alloy, chromium plated screwed down high pressure with crown or capstan head.
Supply only CP brass Bib taps 15mm dia fancy type with capstan head and flange
Supply only 32 mm dia PVC flush pipe suitable for low level PVC flushing cistern.
Supply only 10 ltrs capacity PVC flushing cistern low level with inlet, ball valve, float, handle.
Supply only PVC water tank cover of any size and capacity.
Supply only CP brass shower rose with swivel joints 125mm dia with 18mm dia chromium plated pipe.
Supply only 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, of size exc 6 Sqcm and nexc 10 Sqcm in cross section
Supply only stainless steel grating of size 100 mm with or without hole
Supply only brass CP wall mixture three-in-one (3-in-1) system with provision of telephonic shower
Supply only 15mm dia swan neck taps cast copper alloy chromium plated with crown or capstan head
Supply only gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, suitable for 20mm bore
Supply only 20mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms)
Supply only 40 mm low density polyethylene pipes (LDPE) of pressure rating 6 Kg per Sqcm
Supply only blue teak/tinned tacks
Supply only Pozzolana Portland Cemen 43 gradet (PPC), (50 Kg bag).
Supply only White cement, ISI marked, in 1 Kg packing
Supply only Fine sand
Supply only Integral water proofing compound
Supply only 12.5 mm graded stone aggregate
Supply only Mild steel butt hinges medium weight, cold rolled, ISI marked, 100mm long .
Supply only mild steel sliding door bolt, 250 mm long, ISI marked, with hasp, staple (bolt type) bolt not less than 16mm dia including bolts and nuts
Supply only Aluminium alloy, anodised, sliding door bolt, 300 mm long, ISI marked, with hasp, staple (bolt type) bolt not less than 16mm dia including bolts and nuts
Supply only Aluminum anodized, barrel tower bolts of extruded section 200mm long, ISI marked
Supply only Aluminum anodized, barrel tower bolts of extruded section 150mm long, ISI marked
Supply only Aluminum handles, fabricated type, anodized 100mm long, ISI marked.
Supply only Aluminum handles, fabricated type, anodized 150 mm long, ISI marked.
Supply only floor door stopper 100 mm size of aluminium alloy body and anodized.
Supply only continuous (piano) hinge, mild steel, bright finish, ISI marked, (width of flap 40mm when open) .
Supply only oil putty.
Supply only door bottom seal 92 cm long with aluminium plate and black rubber at bottom for covering gaps between door and floor.
Supply only 32mm dia , fancy type, powder coated mild steel drapery rod, best quality.
Supply only powder coated mild steel brackets for fixing 32 mm dia drapery rods best quality.
Supply only assembled steel rack for kitchen 750mm x 600mm of weight not less than 7 Kg each
Supply only Mild steel helical door spring, 200 mm long.
Supply only single action spring hinges mild steel with steel wire springs stove enameled black 125mm long.
Supply only MS handles of sides (L/R) stove enameled black suitable for glazed steel window/ventilator.
Supply only Casement stays, size 250 mm, with hinged joint and two plates, with studs complete
Supply only Ball catches with 8mm dia steel ball, and brass body and striking plate
Supply only Hasp and staple 100 mm size, mild steel, safety type, stove enameled black, including bolt to hinge plate.
Supply only stainless steel peg set of 06 hooks complete all as directed
Note :- Materials supplied against item no 5 to 66 by the contractor shall be deposited first in store yard of AGE B/R -III and same shall be issued by the department to the contractor/his authorized rep on daily basis as per nature of complaint and as required at site. A register shall be maintained by the contractor or his authorized rep for the stores / materials supplied by the contractor to the department and then issued by the department to the contractor on daily basis. The register shall be kept in the custody of concerned JE and shall be produced to GE office at the time of making payment of RARs/ final bill to the contractor.
S&F in repairs Vitreous china wash hand basin , white, flat back, of size 550x450mm.
S&F in repairs 18/19 mm thick pre-laminated particle board laminated both sides, exterior grade, ISI marked.
S&F in repairs 9 mm thick Plywood grade BWR, type BB ISI marked.
S&F in repairs 12 mm thick Plywood grade BWR, type BB ISI marked.
S&F 15mm dia medium grade GI tubing with all fittings and fixtures fixed to walls, ceilings etc including taking down existing pipe complete all as directed.
S&F 20mm dia medium grade GI tubing with all fittings and fixtures fixed to walls, ceilings etc including taking down existing pipe complete all as directed.
S&F 25mm dia medium grade GI tubing with all fittings and fixtures fixed to walls, ceilings etc including taking down existing pipe complete all as directed.
S&F in repairs sink drainage board made of stainless steel 1.0mm thick with plug washer and waste PVC pipe overall size 915x460mm bowl size 410x330x160mm.
S&F in repair vitreous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and making good to floor complete making good to floor all as directed. Make: Parryware / HIindware/ Cera
S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera
S &F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as directed.
S&F 3mm thick plain gass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane incl raking out old glass complete all as specified and as directed .
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 Sqm in each pane raking out old glass complete all as specified and as directed .
S&F 4mm thick plain gass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane incl raking out old glass complete all as specified and as directed .
Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs from mouths of circulating pipes etc complete and writing date of cleaning by synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYY” complete all as specified.
Repair of stuck MS windows and ventilators by removing deposits, rust and applying greese / oil to make shutters and handles functional including welding new box hinges complete all as directed.
Complete removal of trees/plants, upto roots growth on bldg's roofs, chajjas, at junctions of pipe line fixed on walls and walls coming on bldgs and removing the material (Branches and plants ) to outside MOD land complete all as directed Note : Work to be carried out up to 06 storey building.
S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks as in panels of wire gauzed shutter and including M&L for providing members of 2nd class HW wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed.
S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with galvanised wire staples etc as in MS windows shutter including making holes/ cutting rusted bolts and nuts on steel windows and provision of new nuts and bolts suitable for MS beading complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of old brick work complete all as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:6 finished even & smooth without using extra cement
M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces on ceiling in CM 1:3 finished even & smooth without using extra cement
M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash on ceilings complete all as directed.
M&L preparation of new plastered surface and applying two coats of cement base paint over a coat of primer on walls all as specified and as directed at site.
M&L Preparation of new plastered surfaces of wall and applying two coat oil bound distemper over a coat of primer over one mm thick wall care putty (of Birla make) smooth finished over a coat of alkali resistant primer, complete all as directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed.
M&L for glazed ceramic tiles of size 300x450x7 mm thick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar 1:4 including dismantling of existing tiles along with a backing coat complete all as directed.
M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including cutting, rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed.
S&F factory made uPVC top hung glazed and wire gauzed ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and glazed shutter with plain glass 3 mm thick pin head/frosted glass alongwith mosquito proofing shutter with stainless steel wire cloth 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature, single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, Reinforced with G/J/U/O shape galvanised MS section considering structural/wind load requirements. Ventilator to be provided with proper operative and locking hardware mechanism, including taking down old ventilators all as specified.
M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate), as in floors finished even & smooth with out using extra cement including demolition of existing concrete complete all as directed.
M&L for 75mm thick plain cement concrete1:3:6, type C1 (using 20mm graded stone aggregate) as in plinth protection including providing 10mm thick joints filled with bituminous & sand mixture (1:7) at not exc 3.00 mt intervals & at corners and finished even and smooth without using extra cement including demolition of existing concrete complete all as directed.
M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x20 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile of any description complete all as directed. Make : NAVEEN/SPARTEK/NITCO
M&L for white rotational moulded triple layered polythene 500 Ltrs water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I including dismantling existing damaged PVC tank complete all as directed.
M&L for white rotational moulded triple layered polythene 1000 Ltrs water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including dismantling existing damaged PVC tank complete all as directed.
Dismantling of existing AC/PVC soil and waste pipe 75/100 mm dia including fittings,viz, bends , tee from walls/ floor complete
M & L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.
S & F 110 mm bore PVC (SWR) Soil, rain water, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete
S & F 110 mm bore PVC (SWR) Vent Cowl complete .
S & F 75 mm bore PVC (SWR) bends of any radius complete
S & F 110 mm bore PVC (SWR) bends of any radius complete.
S&F in repairs PVC (SWR) pipes,150 bore of pipe as in spouts/rain water pipes, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.
S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed
Cleaning of roofs, including all damaged surface vegetation, shrubs including grubbing of roots of any size and description, disposal of debris outside MOD area and including filling of disturbed with PCC 1:2:4 type B0 (using 12.50 mm graded stone agg) and finished even smooth complete all as directed.
Dismantling and removing sunken floor filling and depositing the same outside MOD land complete all as directed.
M&L for plain cement concrete 1:5:10 type E2, (using 40 mm graded stone aggregate) as in filling of sunken floors complete all as directed.
M&L for 15 mm thick rendering on concrete/brick surfaces in CM 1:4 duly mixed with water proofing compound @ 2% by the weight of cement and finished even and smooth without using extra cement complete all as directed. Note : water proofing compound shall be measured and paid separately.
SRI SAI ENTERPRISES
Anjana corporation
CHAVA CONSTRUCTIONS AND ELECTRICAL PROJECTS
MVS ENTERPRISES
Maruthi international
SHAH ENTERPRISES
S Anjan Reddy
Brite electricals
WELDECOR
Venkat Sai Enterprises
sri vishnu enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .