REPAIR/REPLACEMENT OF EXTERNAL ELECTRIFICATION CABLES AND OTHER CONNECTED WORKS INCLUDING STREET LIGHT FITTINGS POLE AND REPAIR TO INTERNAL WIRING FITTINGS FIXTURES CEILING FANS EXHAUST FANS AT RASPUNJA MIL CAMP INCLUDING MAP PH-II UNDER GE (C) KOLK

Amount

Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc.complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

All as per item No. 02.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.

All as per item No. 02.00 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge.

M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

S&F Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. Make:-Anchor Cat No 14119/Legrand cat no-673044/ Havells Cat no- AHFKPXB063/Plaza / Cona.

S&F Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type complete all as specified and as directed. Make:- Anchor Cat No 14111 & 14119 /Legrand Cat no-677225/ Havells/ Plaza / Cona.

S&F Switch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type complete all as specified and as directed. Make:- Anchor Cat No- 14614/ Legrand cat no-673042/Havells/ Plaza / Cona.

S&F Switch piano, flush type, Single pole one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. Make:- Anchor Product Code No 14111/Legrand cat no-677200/ Havells cat no -AHFSXXW101/ Plaza / Cona.

S&F Ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. Make:- Anchor Cat No 39040/3290/ Havells/ Plaza / Cona.

S&F Ceiling fan regulator electronic Step type, solid state, , 240 volts, complete all as specified and as directed. Make:- Anchor product code 14502 / Havells cat no-AHFRFXW004/Legrand cat no-677236 Plaza / Cona.

S&F Bell/buzzer push 5/6 amps, flush type, white/ivory finish complete all as specified and as directed. Make:- Anchor Penta PC code 14113/ Havells cat no-AHCSBXW100/Legrand cat no-573413/ Plaza / Cona.

S&F Call bell, ding dong AC 230 volts, single pole complete all as specified and as directed. Make:- Anchor code 38921/Havells cat no-AHNWEMW000/Legrand cat no-673034/ Plaza / Cona.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make:- Anchor Cat No 39538/51205/Havells cat no-AHLHAMW000/Legrand cat no- Plaza / Cona.

S&F Energy efficient LED fittings of capacity 20W suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length including taking down old unserviceable one complete all as specified and as directed. Make:- Crompton cat no CIS-305-40-57SL or equivalent in Havells Cat No-ENDURALINEARNEOBS20WLED865SPCWH/ Bajaj cat no-BCLAB20

S&F LED fittings with lamps of 30 watts for bldg security light IP 66 powder Coated pressure die cast aluminium compact high power LED street light with compact size & rough design 32 mm GI Bend including taking down old unserviceable one complete all as specified and as directed. Make :- Crompton Cat No LSTS-30-CDL-M /Bajaj cat no-ENXTP30LWHPO/Havells Cat No-ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC.

Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

S&F MCB SPN DB made up with sheet metal single door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed. Make:- L&T Cat part No.DBSPN004DD/Legrand cat no- 507600or equivalent ABB/ C&S Electric Ltd. Cat No-CSDBSPNPCGDD04

S&F Sheet metal double door enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed. Make:- L&T Cat part No.DBSPN008DD/Legrand cat no- 507601or equivalent ABB/ C&S Electric Ltd.Cat No-CSDBSPNPCGDD08

S&F MCB TPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 8 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed. Make:- L&T Cat part No.-DBTPE008DD/Legrand cat no- 507662 or equivalent ABB/ C&S Electric Ltd.Cat No-CSDBTPNHCGDD08

S&F MCB 6 to 32 Amps, SP, 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed. Make:- Legrand Cat Part No 408595, L & T Cat part No.BB10060C to BB10320C or equivalent in Hager/ Siemens/ ABB/ Schneider/C&S Electric Ltd.Cat No-CSMBSIC32

S&F MCB 6 to 32 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA complete all as specified and as directed. Make:- Legrand Cat Part No 408617 or equivalent in L&T Cat part No.BB20060C to BB20320C/ Hager/ Siemens/ ABB/ Schneider /C&S Electric Ltd.Cat No-CSMBS2C32

S&F FP 63 Amps, 415 Volts ,C- Curve breaking capacity 10 KA complete all as specified and as directed. Make:- Legrand Cat Part No 408683 or equivalent in L&T Cat part No.BB40630C/ Hager/ Siemens/ ABB/ Schneider./C&S Electric Ltd.Cat No-CSMBS4C63

Taking down and opening out the ceiling fan/wall mounted upto1400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots complete including materials like split pin,rubber reel etc reassembling and refixing of fan in same position or any other situation complete all as specified and as directed. Note : Spare parts shall be measured & paid separately under relevant item.

Rewinding of fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified and directed.

Supply only ball bearing suitable for 1200/1400mm sweep Ceiling fan of any make complete all as specified and directed.

Supply only capacitor of 2.5 mfd for Ceiling Fan complete all as specified and directed.

Supply only gun metal bush of suitable size for ceiling fan of sweep 1200mm/1400mm as per existing one complete all as specified and directed.

Supply only nuts, bolts, for Ceiling fan complete all as specified and directed.

Supply only shafts for ceiling fan upto 1400mm sweep complete all as specified and directed.

Supply only PVC connector for Ceiling Fan complete all as specified and directed.

Supply only rubber reel insulator for Ceiling fan complete all as specified and directed.

Supply only S hook as standered shape and size for fixing Ceiling fan complete all as specified and directed.

Supply only mild steel down rod 16mm dia ,1.5m long for fixing Ceiling fan complete all as specified and directed.

M&L Painting of ceiling fan/wall mounted fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified and directed.

Taking down and opening out the exhaust fan upto 400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots rubber reel etc. reassembling and refixing of fan complete all as specified and as directed. Note : Spare parts shall be measured & paid separately under relevant item.

Supply only bush suitable for exhaust fan complete all as specified and directed.

Supply only ball bearing suitable for exhaust fan.complete all as specified and directed.

Supply only capacitor 2.5 mfd for exhaust fan complete all as specified and directed.

Supply only shafts for Exhaust fan suitable for upto 450mm sweep complete all as specified and directed.

Supply only louver for Exhaust fan complete all as specified and directed.

Rewinding of exhaust fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified and directed.

Taking down carefully unserviceable geyser of any type and make from site after disconnections of water & electrical connections & carrying out to MES store yard for inspection and thereafter to workshop for repair & replacement of components such as heating element, thermostate, cable, neon lamp, plugtop, outer casing, plates & repair work to apparatus plate etc and carrying back to MES storeyard for testing and refixing at site and making water & electrical connection on completion and complete all as specified and as directed. NOTE: Spares shall be measured and paid separately under relevant item.

M&L Painting of geysers 25 ltrs capacity at site/at workshop with one coat of synthetic enamel paint (white) best quality including preparation of surfaces with brush, cleaning agents etc complete all as specified and directed.

Supply only following spares for geysers:- (a) Heating element 1.5KW including rubber gasket ISI marked suitable for existing geysers complete all as specified and directed.

(b) Heating element 2.0 KW including rubber gasket ISI marked suitable for existing geysers complete all as specified and directed.

(c) Heating element 1KW porcelain suitable for existing geyser 25/50 lit capacity complete all as specified and directed.

(d) Thermostate for suitable existing geyser of 25/50 litrs capacity complete all as specified and directed.

(e) Chromium plated copper pipe of length not less than 60cm including washers for incoming & outgoing water connections complete all as specified and directed.

(f) Apparatus plate assembly complete for geyser of capacity 25/50 litrs capacity complete all as specified and directed.

(g) Outer casing made out of 22 SWG MS sheet suitable for geyser of capacity 25 litrs complete all as specified and directed.

(h) Split plate bottom cover made out of 22 SWG MS sheet suitable for 25 litrs capacity geyser complete all as specified and directed.

(j) Split plate Top cover made out of 22 SWG MS sheet suitable for 25 litrs capacity geyser complete all as specified and directed.

(k) Insulating material glass wool complete all as specified and directed.

(l) Element holding brass stud complete all as specified and directed.

(m) Element holding clamp complete all as specified and directed.

(n) Fusible metal plug complete all as specified and directed.

(o) Neon lamp round/square with connection lead complete all as specified and directed.

(p) Non return valve 1/2" for geyser inlet complete all as specified and directed.

(q) Storage tank capacity 25 ltr complete all as specified and directed.

Taking out old U/S LT UG cable of any size and any description including GI pipe of any dia fixed with bldg and bricks for cable protection where ever appeared complete all as directed by Engineer-in-Charge. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately.

Supply & laying or fixed with bldg incl clamps for XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 95 Sqmm 3.5 core complete all as specified and directed.

All as per item No 63.00 above but 70 Sqmm 3.5 core

All as per item No. 63.00 above but 50 Sqmm 3.5 core

All as per item No.63.00 above but 35 Sqmm 3.5 core

All as per item No.63.00 above but 25 Sqmm 4.0 core

All as per item No.63.00 above but 16 Sqm 2 core

All as per item No. 63.00 above but 10 Sqm 2 core

Re-laying/re-fixing only cables at different sizes obtained from Item No 1 here-in-before in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge are as under:- (A) 10 Sqmm 2 Core

All as per item No 70.00 above but16 Sqmm, 2 core

All as per item No 70.00 above but 25 Sqmm, 3 1/2 core

All as per item No 70.00 above but 35 Sqmm, 3 1/2 core

All as per item No 70.00 above but 70 sqmm 3 1/2 core

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed..

All as per item no 75.00 here-in-before but exceeding 1.5 mtr in depth and n exc 3 mtr

Returning filling in including spreading levelling watering and well rammming in layers not exc 25cm complete all as specified and directed.

Removing excavated materiasl not exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and direced.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed.

Laying only in trenches Old serviceable bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed.

Supply and erecting steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified, type 410 SP-31, 9 Metre long including two coats of aluminium paint over one coat of red oxide primer with dismantling of old unserviceable pole and PCC complete all as specified and as directed by the Engr-in-Charge. Note:- Rates quoted shall be deemed to be inclusive of following works:- (a) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surface. (b) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamelled paint of apprised shade n exc 5 Cm height including numbering of pole all as directed by EIC.

M&L Plain cement concrete (1:3:6) type C-2 ( with using 40 mm graded stone aggregate) as in foundation of poles including necessary form work complete all as specifed and directed.

M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole/struts and other similar location etc with and including all necessary form work complete all as specified & directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strips 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore medium grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

M&L for Cutting roads / hard standing to a depth not less than 45 cm and not less than 40 cm wide for laying of GI pipe to draw the UG cable and making good the disturbed surfaces by filling of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposed off the surplus debris and soil to a distance not exc 50 m complete all as specified and as directed by the Engr-in-Charge.

M&L 40mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. Make- Jindal/Tata/Nezone

M&L 50mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. Make- Jindal/Tata/Nezone

M&L 80mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. Make- Jindal/Tata/Nezone

M&L for repair of LT panels/LT feeder piller boxes by carrying out checking thoroughly all electrical connections, lugs busbar, voltmeter, ammeter ,cable glands ,insulator on busbar, including busbar changing and tightening all connections properly with proper size of new nut, bolt, washer as per the site requirements and insulation of busbar with colour code insulation tapes including welding on damage panel and preparation of surfaces internal and external of panels/feeder piller boxes by cleaning with dry cloth /removal dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and rewriting existing letters /numbers as directed and repair the existing PCC basement of the feeder piller box/ LT panel as per site requirement or directed including applying one coat of cement base point after preparation of surfaces and testing complete as per direction by Engineer- in- charge. Note:- Cost of PCC, Painting, Nut, bolt, washer etc. are deemed to be included in quoted rates.

Supply only Indicator lamp, LED type of colour red, blue and yellow.

Supply only MCCB 3 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed. Make- L&T Cat no-CM90517OOJO or equivalent model from make:- ABB / Legrand./ C&S - Cat No -CSESL125FMU3P-63A

Supply MCCB 3 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed. Make -L&T Cat no-CM90517OOKO or equivalent model from make:- ABB / Legrand./C&S - Cat No -CSESL125FMU3P-100A

Supply only, MCCB 3 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 16 KA complete all as specified and directed. Make - L&T Cat no-CM90676OOLO or equivalent model from make:- ABB / Legrand./C&S - Cat No -CSESL125FMU3P-125A

Supply only, MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed. Make- L&T Cat no-CM92108OOM1OG or equivalent model from make:- ABB / Legrand./C&S - Cat No -CSESL125FMU3P-160A

Supply only, MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed. Make - L&T Cat no-CM92109OON1OG or equivalent model from make:- ABB / Legrand /C&S - Cat No -CSESL125FMU3P-200A

Supply only, MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed. Make - L&T Cat no- CM92109OOP1OG or equivalent model from make:- ABB / Legrand/C&S - Cat No -CSESL125FMU3P-250A

Supply only Changeover Switch, open type, 250 Amps, Manual open execution type, 415 V including necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat Part No. CO32500OOOO or equivalent model from make:-Legrand / Schneider/C&S - Cat No -CSCS250NM4CO

S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground as in repair complete all as specified and directed.

S&F GI strip of size 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground as in repair complete all as specified and directed.

S&F Air termination aluminium single pointed rod 12 mm dia, 300 mm long as in repair complete all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw as in repair complete all as specified and as directed.

S&F New generation energy saving and environmental friendly long life LED street light luminaries 90 Watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 m long, made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells Cat Part No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or Make:- Bajaj Cat part No. BRTFG 90W LED I V2 or Make:- Crompton Cat Part No. LSTP-90-CDL-HPM.

S&F New generation energy saving and environmental friendly long life LED street light luminaries 45 Watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 m long, made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells Cat Part No. ENDURAPEARLNEOSL45 WLED757PASYTOPC or Make:- Bajaj Cat part No. BRTFG 45W LED I or Make:- Crompton Cat Part No. LSTS-45-CDL-M.

S&F New generation energy saving and environmental friendly long life LED flood light luminaries 150 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells Cat Part No. JETAIRISFLS150WLED757SYMLTG or Make:- Bajaj Cat part No. BJFL 100WLED I or Make:- Crompton Cat Part No. LFLN-150-CDL-160M.

S&F PVC junction box of size 200mm x160mmX 98mm and box should have four terminal of 25 Sqmm and earth terminal along with MCB 6 Amps and fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charg. Make:-Hansel Cat part No. K 8250 or equivalent model from make:- Sintex. Cat No.-GSJB1414

S&F New generation, Led bollards 10W, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Crompton Cat Part No. LBLSN-10-CDL or equivalent Philips/ Surya Roshni Ltd/Wipro/ Havells / C&S Electric Ltd.

S&F KWH meter 1 P LCD meter 5-30A with optional port + Box including taking down old unserviceable one complete all as directed by Enginner-in-Charge. Make:- L&T cat Part No.WM101BC5DL0 or equivalent model from make:- Legrand / Siemens/ BCH.

S&F KWH meter 3 Ph 4 W kWh CT op base mtg 240V 5 -10 A with optional port + Box including taking down old unserviceable one complete all as directed by Enginner-in-Charge. Make:- L&T cat Part No.WM301BC3C00 or equivalent model from make:- Legrand / Siemens/ BCH.

M&L Preparation of old painted surface of existing steel tubular swaged pole 9 mtr long, cross arms, clamps, GI street light bracket etc and applying two coats of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip around between the junction of aluminium paint and black paint complete all as specified and directed.

Yaduvanshi Traders

SANTOSH INTERNATIONAL

MS JYOTI INDUSTRIES

VAGIRATHI ENGINEERING COMPANY

INDIA ELECTRICAL EQUIPMENTS

SEN ELECTRIC WORKS

PUTUL CONSTRUCTION CO.

NUPUR CONSTRUCTION

R T BUILDERS

KWALITY CONSTRUCTION

KALYPSO SALES AND SERVICES

MASTER BUILDERS