REPAIR /MAINT OF FLOORING, PLINTH PROTECTION ETC IN MD ACCN UNDER AGE B/R-II GE BABINA

Amount

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for 75mm thick cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and fair complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey cement and pigments complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed.

M & L for Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick rendering cement mortar 1:6 complete all as specified and as directed.

M/L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finish even & smooth with using extra cement complete all as specified and as directed.

M &l for 38mm wide and 3mm thick glass dividing strips complete all as specified and as directed.

Material & Labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete ,sub base of floor etc complete all as specified and as directed.

M&L for 50mm thick sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified and as directed.

M&L for machine pressed precast concept interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment over 50 mm thick sand bed complete all as specified and as directed.

M&L for machine pressed precast concept interlocking paver block of local make available any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment over 50 mm thick sand bed complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S & F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed.

S&F 15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks and fly -nuts screwed for iron pipe and fixed complete all as specified and as directed.

Taking down door shutter exc 1 Sqm and n exc 2 Sqm and refixing including fixing of required fitting etc complete all as specified and as directed by EIC.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15mm thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15mm thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L glazed ceramic colour tiles 300mmx600mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

M&L glazed ceramic colour tiles 300mmx450mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

M&L glazed ceramic colour tiles 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc.including 15mm thick cement mortar screed bed 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and as directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick/concrete or stone walls etc incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick in CM (1:4) on concrete/brick surfaces on wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering 15 mm thick CM (1:6) on concrete/brick surfaces of wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparing of new surfaces and applying two coat of oil emulsion distemper on walls including 1mm thick putty complete all as specified and as directed.

M & L for complete removal of existing treatment from surface of wall and applying two coat of oil bound distemper including 1mm thick putty all as specified and as directed by the Engineer-in-Charge

M & L for applying two coat of cement base paint over a coat of alkali resistant priming paint on external surfaces of wall complete all as specified and as directed.

M & L for complete removal of existing treatment from surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed by the Engineer-in-Charge

M & L for 100mm thick Cement concrete 1:2:4 type B- 1, (using 20mm graded aggregate) in floor complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.

Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm bore complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp complete all as specified and as directed.

s&F of 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Taking up or down existing steel tubing 15 mm bore and including connections etc complete all as specified and as directed.

Taking up or down existing steel tubing 20 mm bore and including connections etc complete and as directed.

Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S/F in repair of stop valves/gate valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia complete all as specified and as directed.

S/F in repair of stop valves/gate valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 15mm dia complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete.

M&L Powder coated Anodised aluminium frame straight for doors / windows using aluminium section of minimum size 100x44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size including taking down door/window complete all as specified and directed

S & F Powder coated Anodised aluminium door/window and ventilator shutters,fixed/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.),tower bolts(200mm long ) , locking device including taking down door/window shutters complete all as specified.

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed.

Supply and fix 4.0mm thick Sheet glass, ordinary quality duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane etc complete all as specified and as directed by the Engr-in-Charge.

S/F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

S&F of anodised aluminium snap grid frame work for false celing all as specified and hangers 6mm dia GI adjusting level fixed to roof slabs by means of celling cleats made out of GI flat 40mm X 3mm size 60mm long complete all as specified and as directed.

M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.

M/S Chadha Brothers

M/S M S Constructions

Ms Vinay constructions

M/s Hansraj Shivhare

M/s Ravi Traders

M/s Pratham Enterprises

FTH Traders

M/S PRAKASH RAIKWAR TRADERS AND CO

M/S Kharya Associates