15th CFC 2023-24 Supply, Delivery and installation of 20000 x 50 M / H (Approx 150 HP ) Vertical Turbine Pump set 1 No and Maintenance Work at Lower camp Head works Pump room and Chlorination room in Cumbum Municipality.

Supply and delivery of VERTICAL TURBINE PUMP (WATER LUBRICATED) CONFIRMING TO IS1710/1989 (REAFFIRMED 2009) 1500 RPM SUITABLE FOR VERTICAL HOLLOW SHAFT SQUIRREL CAGE Supply and delivery of Vertical type water/Oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 ( Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete(TWAD SOR 2025-2026,Page No;129 Sl.no.WD-M1880) a)Lower camp -( 20000 x 50) LPM x H

Supply and delivery of FLEX COMPENSATED MAGNETIC AMPLIFIER SOFT STARTER SUITABLE FOR L.T. SQUIRREL CAGE MOTOR Supply and delivery of floor mounted type FCMA Air/ Oil Cooled soft starter suitable for the LT motor offered for operation in AC three Phase 50Hz (+/- 5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over load relay, instrument panel with frequency meter, Ammeter, Voltmeter, indicating lamp 6Nos, LED ON/OFF type and Start /Stop push button.(TWAD SOR 2025-2026,Page No;136 S.No.WD-M1925 ) a)Lower camp - Starter - 136 x 160 KW

Supply and delivery of DI D/F BUTTERFLY VALVES Supply and delivery of DI D/F Butterfly Valves with GGG 40 or equivalent grade as per IS3896 (Part 2) 1985 and subsequent revisions Double eccentrically disc with renewable soft seal on the disc and body seat face of Stainless Steel / nickel weld overlay micro finished with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside Face to Face dimensions as per AWWA C 504 or BS 5155 or IS 13095 and with 5 years warranty.(TWAD SOR 2025-2026,Page No;79 S.No.WD-M1207)a)Lower camp - 400mm Butterfly valve

Supply and fixing of 400 mm Sluice valve including cost and conveyance of materials and all labour charges etc., complete as per standard specification.(WD-M 1079 )

Supply and delivery of L.T. CABLES 4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING (TWAD SOR 2025-2026, Page No;140 S.No.WD-M1971 ) a)Lower camp -LT Cable 3 core x 300 sqmm

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.a)Lower camp -Cholorination Room

Provision for GST 18%