REPAIR/REPLACMENT OF OLD EARTHING/LIGHTENING PROTECTION AND CONNECTED ACCESSORIES FOR BLDG PANEL AT VARIOS LOCATION AND FIRE FIGHTING OF APS AND OTHER WKS UNDER GE (MCTE) MHOW

Amount

Taking down switch fuse/DB'S including MCCB/MCB'S any type and any capacity complete all as directed.

Taking down submain wiring any type and any size and making good disturbed surface and matching with existing colour complete all as directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re fixing the same new indoor LT panel complete all as specified and as directed.

Taking down carefully point wiring of any type complete for light, fan ,bell,socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories including making good disturbed surface to match the existing surface complete all as directed.

Repairs/ Overhauling of Old Existing LT Building Panel/ Distributions boards and repairs/replacement of glass view for reading of meter and providing rubber/PVC gasket of suitable size all sides of door including preparation of old rusted surfaces and applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces by spraying including filling cavities with filler, cleaning all dust etc. and writing Qtr Numbers (Like as A,B,C,D) in black paint with skilled painter, Complete all as specified and as directed by Engr-In-Charge.

Supply and Fix in repairs flush mounting factory made Vertical FP MCCB DB, IP-42 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 amps MCCB as incomer and SP/SPN MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge.

S & F in repair TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4ways 415 V, connection with aluminium/copper lugs including civil/plastering work for make up good the disturbed surface matching with existing surface complete all as directed.

M&L in repair for Sub main wiring in repairs with two runs of single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4.0 Sqmm size with multistranded copper conductor, drawn in existing PVC conduit, one run of PVC insulated unsheathed 4.0 sqmm FRLS cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 4.00 sqmm cable, one run of 4.00 sqmm cable will be measured as one unit.

S&F (in replacement) MCCB 4-pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for 100 Amps rating, 16 KA breaking capacity

Supply and lay XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of size 16 sq mm 4 core, cross sectional area lay trenches/wall/poles/ducts/pipes or through sleeve etc including connecting/jointing with lugs and testing all as specified and directed by Engineer-in-Charge.

Supply laying and jointing GI pipe 'light grade' 50 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

M&L for point wiring in Existing conduits with PVC insulated and unsheathed, single core FRLS cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into PVC rigid conduit with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLS cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2 mm thick sheet covered with 2.6 mm thick white hylam sheet cover of suitable size for mounting switches/sockets/fan regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following

(a) One light/fan point /bell point controlled by one switch

(b) One point for socket outlet 5 amp on independent board

(c) One point for socket outlet 5 amp same board

(d) One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board

Supply and fix in repairs double door SPN DBs 12 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link,Earth bar and Din ral complete.

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium /copper lugs complete all as specified and directed.

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S & F in repair MCB triple pole & neutral 63 amp, 415 volts, 'C' series' 10 KA breaking capacity & connection complete.

S&F switch piano flush type, 6 amps, 230V AC,single pole, one way

S & F socket out let multipurpose suitable for 2 pin and 3 pin 5/6 amp type

S & F socket out let 2 in 1, multipurpose suitable for 2/3 pin 15 amp flush type.

S&F switch piano flush type, 15 amps, 230V AC, single pole, one way

Supply & fixing ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body for surface type, 65x50mm three terminal.

Supply and fix in repair/replacement of air termination single pointed aluminium rod 12mm dia and 300mm long all as specifed and directed

S&F angle type holder insulated body with back plate complete all as directed.

S & F in repair fan step regulator, electronic type and connection complete after dismantling/ removing unserviceable regulator.

Supply in replacement, electric bell, ding dong , AC, 220 V, single pole.

Supply in replacement, electric buzzer, AC, 220 V, single pole.

Supply in replacement, compact electronic ballast suitable for any type fluorescent tube/CFL light fitting of 1x36 watt complete.

Supply and fix in repair/replacement of aluminium roof and down conductors of size 25 x 3mm thick fixed on insulators/ saddles of suitable size all as specified and as directed.

Supply and fix in repair/replacement of Test terminal point block made of gun metal or phosporous bronze of size 75x75x25 mm drilled and screwed including 3 nos, 8 mm dia screws all as specified.

M&L for earthing complete with GI steel earth plate electrode 60cm x 60cm x 6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.

Supply in replacement, compact electronic ballast slim type suitable for Existing 28 Watts fluorescent tube light fitting of 1x28 watt complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Modular Switch flush type 06 Amps single pole, one way complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB, DB, SPN, 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix in repairs Modular Bell push flush type, 10 Amps complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Incoming : MCCB 63 A, 4 pole, 25KA-1 No. including CTs, Digital Ammeter, ASS, Digital Volt meter, VSS, Phase indicating lamps & control fuses/MCBs etc. Bus Bar : Copper strip busbar rating 250A of size for Ph 12 x 10 mm, N&E 12x5mm and short circuit capacity 30ka, with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 05 Nos Outgoing : Separate cubical chamber with a cable alley not less than 300 mm width for installation/connecting the following switch gear :- (i) MCB, 40A DP amps, 240 volts, ‘C’ curve, 10 KA - 05 Nos (ii) MCB, 10A DP amps, 240 volts, ‘C’ curve, 10 KA - 01 Nos (iii) Fixing only 1 phase serviceable existing electric meter- 04 Nos (obtained from item No 3)

Incoming : MCCB 63 A, 4 pole, 25KA-1 No. including CTs, Digital Ammeter, ASS, Digital Volt meter, VSS, Phase indicating lamps & control fuses/MCBs etc. Bus Bar : Copper strip busbar rating 250A of size for Ph 12 x 10 mm, N&E 12x5 mm and short circuit capacity 30ka, with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 05 Nos Outgoing : Separate cubical chamber with a cable alley not less than 300 mm width for installation/connecting the following switch gear: (i) MCB, 40A DP amps, 240 volts, ‘C’ curve, 10 KA - 07 Nos (ii) MCB, 10A DP amps, 240 volts, ‘C’ curve, 10 KA - 01 Nos (iii) Fixing only 1phase serviceable existing electric meter- 06 Nos (obtained from item No 3)

S&F in Replacement 63 mm dia 15 mtr long hose conforming to IS 636 complete with male and female coupling conforming to IS 903 as per exising make, including dismantling of old one.

M&L for Sheet glass of size 5.5mm thick, ordinary quality and glazing complete with rubber gasket including cutting of glass in oval shape of size not exceeding 0.5SQM Each all as directed by Engr-in-Charge at site.

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/ spring clips/ removing beads etc, including making good breakages in taking out and providing for fixing of new one all as directed by Engr-in-Charge.

S & F in Replacement of old hose reel of 19/20 mm size of 30 mtr length complete with nozzle , Gate valve, MS sheet 2mm thickness as per exising make, including dismantling of old.

Supply and fix Valves, Sluice, flanged of class 1.6 PN,100 mm dia as per exising make, including dismantling of old one all as per specified and directed by Engr-in-Charge.

M&L for Cleaning of balancing tank from bottom and side walls by scrubbing with wire brush and removing mud collected at the bottom and mud outside empty land and applying two coat of synthetic enamel paint on entire inner surface complete all as specified and directed.

Opening complete pressure filter of capacity 20,000 Gallons and taking out existing filter media (sand, gravels any size) and pipe, removing filter media to a distance not exceeding 50 metre for reuse at site, including necessary repair/ welding to make the pressure filter vessels completely leak proof for improving the strength. Cleaning of pressure filters by scraping with the help of hard steel wire brusshes and physical cleaning of surfaces by descarding/ brooming slit and sludges and other deposites from inner side. Collecting and taking them out with the help of mannual labour and deposite outside the installation and finally re-assembling the pressure filter including re-fixing of pip in existing position duly cleaned complete all as specified and directed.

M&L for Overhauling of Pump set complete with motor of any capacity 5 HP to 12.5 HP and any make by after disconnecting of all electrical and water connections and removing/taking up from the foundation, taking to civil workshop for repairing or repair the same at the site (Pump house) by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, gland plate etc. complete. Re-assembling including oiling, greasing replacement of worn out nuts, bolts, gaskets etc. and refixing in its original position at site, making all connections, commissioning and testing etc. complete all as specified and directed by Engr-in-Charge. Note : (a) The rates for minor items like nuts, bolts, gaskets etc essential for functioning of pump and transportation charges are deemed to be included in the quoted rates. (b) Ball bearing, impeller, shaft etc are replaced as per requirement shall be measured and paid seperatily.

S&F in replacement of Ball bearing of electric driven centrifugal pump set as per existing make pump set completed. Make : Deep group /Polymer

S&F in replacement of Bronze impeller of centrifugal pump set as per existing make pump set complete. Make : Deep group /Polymer

M&L for rewinding of motors of any make by removing of burnt copper winding and rewinding with supper enameld copper insulated winding wire of required size and number of turns, varnishing and baking, testing for operation and painting with one coat of synthetic enamel paint for the following capacity . Note :- (a) The rates for transportation charges are deemed to be included in the quoted rates.

(a) 12.5 HP 3 Phase

(b) 7.5 HP 3 Phase

Supply and fixing in repair DOL starter suitable for 5 to 12.5 HP, 3 phase electric motor, workable at 415 volts, 50 Hz, AC supply with suitable over load relay, power contactor, protection relay for earth fault, over voltage, under voltage in existing enclosure box including dismantling of old one all as specified and directed. Make : CG/ Havells/ Indoasian/ Anchor/ Paragon

S&F Pressure gauge suitable for bearing pressure upto 20 Kg/ Sq cm. Make : MEI / GURU/ AEE

Supply and fixing Contactor 63 Amps Conforms to IS / IEC 60947-4-1 & IEC 60947-4-1, Aux. Contacts 2 NO + 2 NC, complete all as specified and directed including taking down old unserviceable contractor. Make : L&T/ TC/ C&S/ Benlo

M&L for overhauling and repair to suction sweeper by dismantling/opening of suction sweeper, overhauling and replacement of unserviceable parts, PVC fiber wheel -04 Nos, MS wheel pin-08 nos, brush of suitable size (as per sample)-01 Nos, Nuts/Bolts/Washers/as per sample), including painting of complete suction sweeper and assessories by applying two coat of synthetic enamel paint, re-assembling the sweeper and testing complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 10 to 32 Amps, single pole and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Legrand Cat Part No 408587 to 95/L&T/Havells

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 32 Amps, SPN and current carrying capacity in the MCB DB complete with connection testing and commissioning Make : Legrand Cat Part No 408587 to 95/L&T/Havells

S&F in replacement of gunmental single acting air release valve with screwed inlet 25 mm dia all as specified and directed as per exising make, including dismantling of old one.

S&F in replacement of Pressure gauge 4"dial 0-14 kgs rating with isolation cock and chrome plated copper pipe on main header including dismantling of old one. Make : AE/H Guru

S&F in replacement of standard short size SS branch pipe with (Brass) SS nozzle 16 mm dia outlet with standard instantaneous type 63 mm dia coupling (ISI mrked) including dismantling of old one.

M&L for painting of fire fighting MS pipe 80/100 mm dia with one coat of low VOC synthetic enamel paint of red colour and make to give an even shade including surface preparations all as specified and directed.

S&F in replacement of dual type pressure switch suitable for 1-20 kg/cm2 including electrical connection setting of cut-in and cut-off pressure complete, with dismantling of old one all as specified and directed. Make : Indfos/Denfos.

S&F in replacement of bearing for fire pump 1426 as per exising make, including dismantling of old one compete all as specified and directed.

S&F in replacement of male-female fire hydrant coupler, including dismantling of old one compete all as specified and directed.

S&F in replacement of hydrant washer, including dismantling of old one compete all as specified and directed.

S&F in replacement of hydrant spindle washer , including dismantling of old one compete all as specified and directed.

S&F in replacement of Gasket for all valve & NRV and other valve, including dismantling of old one compete all as specified and directed.

S&F in replacement of Joy-coupling for pump & motor coupled without bore, including dismantling of old one compete all as specified and directed.

Supplying, laying, jointing in repair/replacement of MS pipe Heavy grade, including flanges and fittings such as bends, elbow, tees, reducers, nipples, coupling cap, union, flanges joints, rubber insertions and galvanised nuts and bolts, including painting with one coat of synthetic enamel postal red paint, including hangers and clamps as required and also include all civil breakages and making good the same complete the following sizes :-

(a) 100 mm bore

(b) 80 mm bore

S&F in replacement of Volt Meter in fire hydrant panel box including dismantling of old one. Make : ABB/Schneader/L&T/AE

S&F in replacement of Amper Meter in fire hydrant panel box including dismantling of ole one. Make : ABB/Schneader/L&T/AE

S&F in replacement of rotary switch including dismantling of old one. Make : Kaycee/ABB/L&T

S&F in replacement of Push Button ON/OFF including dismantling of old one.

S&F in replacement of Contactor 15 Amps, 500 V-AC, in fire hydrant panel box including dismantling of old one. Make : Minilec/CG/Havells/ABB

S&F in replacement of single phase preventor 15 Volts, 50 HZs, including dismantling of old one.

S&F in replacement of indicator LED lamp including dismantling of old one.

Supply, fixiing, testing and commissioning in replacement of sounder cum strobe ABS housing (24V) RED including dismantling of old one all as specified and directed . Make : Agni/Honywell/Hitchki.

Supply, fixiing, testing and commissioning in replacement of Manual call point, front protection glass cover, ABS housing with back box (24V) including dismantling of old one all as specified and directed . Make : Agni/Honywell/Hitchki.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply & fix in repairs modular fan regulator step type, 2 module type complete. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fixing in repairs white finished single mounting modular plates sutable for modular accessories of following sizes as per specified and directed by Engr-in-charge. (Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS).

(a) Sutable for 1/2 modules

(b) Sutable for 3 modules

(c) Sutable for 4 modules

(d) Sutable for 6 modules

(e) Sutable for 8 horizontal modules

(f) Sutable for 12 horizontal modules

Supply and fix LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder.

S&F (in building peripheri) energy efficient, compact street lighting 25 Watt LED with deep drawn Alluminium housing complete with conncting wire and provision of GI bracket, clamp, nuts, bolts grounded in wall incl all fixing arrangement. Make : Bajaj Cat No. ENXT 25L WH PO PC SD or equivalent in Crompton /Havells

Supply and fix in repairs LED batten suitable for single T8 LED tube upto 1x22 Watt, without LED tube rod,pre-wired for LED tube, complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed.

Supply and fix in repairs retrofit LED tube light T-8 type, 1x18 Watt, 6500K with extruded Al heat sink for efficient heat dissipation complete all as specified and directed.Make-Bajaj Cat No. BLRB 18 W WH or equivalent in Crompton /Havells

Supply and fix in repairs LED tube light fittings 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed. Make-Bajaj Cat No. BCLSB 10W WH or equivalent in Crompton /Havells

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Make Bajaj Cat part No BCLAB 20 W, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S&F for energy saving recess/surface mounted luminaire 36W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600X600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2'X2') incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement complete all as directed Make-Bajaj Cat No. BZRSQL-36L GX or equivalent in Crompton /Havells

S&F for energy efficient, Ultra Modern design LED luminiaire 36 W (1x4) withCRCA housing white power finish, which provides soft-light glare free symmetrical illumination suitable for Armstrong/ Grid ceiling /surface application, incl provn of three core cable of copper conductor of size 1.0 sqmm, making necessary electric connection from celing rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all necessary fixing arrangment complete all as directed. Make : Bajaj Cat No. BZRSLL-36L LED-GX WH or equivalent in Crompton /Havells

Supply & fix LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement as specified and directed by Engr-in-Charge. Make : Bajaj Cat No. BIBWP 10W or equivalent in Crompton /Havells

Supply & fix Recessed mounted LED panel slim,compact,aluminium die castedge lite panel of 15 W with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge. Bajaj Cat No. BGSLO SLEEK SURFACE 15 W WHSQ

Supply & fix surface mounted round LED panel of 12W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge. Make : Bajaj Cat No. BGSLO SLEEK SURFACE 12 W WHRD or equivalent in Crompton /Havells

Supply and fix in repairs Decorative Wall light fittings suitable for & including LED bulb of 7 watt (B-22), including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED- Driver suitable for LED ceiling light fittings 34/36 watt (2'x2') recess mounting type complete with electric connection at both Input (a.c.) and output (d.c.) side all as specified and directed by Engr-in-Charge. (Make : As per make of existing LED ceiling light at Site)

S&F in replacement LED- Driver suitable for LED Building Security light fittings 25 watt complete with electric connection at both Input (a.c.) and output (d.c.) side all as specified and directed by Engr-in-Charge. (Make: As per make of existing LED Bldg. light at Site)

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 6 sqmm cable,one run of 6.00 sqmm cable and one run of PVC conduit will be measured as one unit.

Supply & laying or fixing 1100 volts grade duty cable with PVC insulated aluminium conductor served with an inner sherthing of PVC tape overall PVC sheathed cable size 4 mm twin core flat/circular cable.

All as per item no. 57 above but 6 Sqmm 2 core

S&F Decorative Post top for 360 degree indirect light (Gate Light) with IP 65 Protection gate light (Prismatic), made up of high grade Resistant to Impact and corrosion, and Glare free and better Uniformity with all necessary fixing arrangement including connection complete all as specified & directed. Make : Bajaj Cat No. BGCTN45WLEDWW or equivalent in Crompton /Havells

S&F Decorative gate light (Prismatic), made up of high grade unbreakable polycarbonate material suitable for retrofit LED 1X/7W TU B22 base with all necessary fixing arrangement including connection & LED Bulb 07 Watts,complete all as directed. Make-Havells cat No LHFXBON1TN6F023 or equivalent in/Crompton/Phillips.

M & L for Point wiring with PVC insulated, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing capping not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel concealed terminal boxes of reqd size made out of 1.2 mm thick sheet covered with 2.8 mm thick plastic laminated bakalite (hylam) ISI marked sheet suitable for switches/sockets/regulators complete all as specified & directed for the following :-

(a) One light/fan point /bell point controlled by one switch

(b) One point for socket outlet 5 amp on independent board

(c) One point for socket outlet 5 amp same board

(d) One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board

Ms Kailash Chandra Babulal

ENVIRO TECH SERVICES

SAHYOG ELECTRIC

S.S. Engineers