Karnataka

Active

Works

Buildings

Construction of Library (elementary schools) to GHPS and GHS Konchigeri village in Siruguppa Taluk

Rural Development and Panchayat Raj Department

RDPR Division Office Ballari | Ballari, Karnataka

Amount: ₹14.9 LCloses: 6 Aug 2026

Timeline

Published24 Jul 2026
Closes6 Aug 2026

Tender Value

₹14.9 L

EMD Value

₹37,500

Closing Date

6 Aug 2026, 10:00 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRE DIVISION BALLARI

Office Number

08392266173

Work Description

Construction of Library (elementary schools) to GHPS and GHS Konchigeri village in Siruguppa Taluk

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28076

Reference Number

RDPR/2026-27/BD/WORK_INDENT28076

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Ballari

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredValid PWD Registration certificate

RequiredAnnual turnover certificate with valid UDIN No for last 5 years i.e., from ., 2021-22,2022-23, 2023-24, 2024-25 & 2025-26 obtained from the Chartered Accountant and supported by the income tax returns filed by the bidder with IT departments

RequiredTo qualify for award of this contract, each tenderer in his name should have in the last five years period i.e. 2021-22,2022-23, 2023-24, 2024-25 & 2025-26 achieved in at least two financial years on average annual financial turnover of 100 percent of cost of the work

RequiredWork done certificate for Satisfactorily completed as prime contractor, at least one similar nature of work value not less than 50 percent from Competent Authority not below the rank of Executive Engineer or equivalent in the last five years period i.e., 2021-22,2022-23, 2023-24, 2024-25 & 2025-26

RequiredExisting commitments and ongoing works which are yet to be completed

RequiredThe works for which tender acceptance letters are received are to be furnished.

RequiredThe information of the works for which tenderer has already submitted tender are to be furnished.

RequiredThe information on litigation in which the Tenderer is involved are to be furnished.

RequiredName, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer are not furnished.

RequiredTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The tenderer should maintain the Road/Building during the defective liability period of one year from the date of completion of the work.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 (KW-1,2,3 &4 ) Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan & upload all the original documents required for this bid to the e-procurement portal. The Original Documents shall be produced at the time of opening of Bid for physical verification.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission.

The contractor should make arrangement for establish mobile quality control lab unit at site itself for conducting quality tests as per requirement at the cost of the contractor

The contractor should submit quality control reports, material test reports and photos along with the bill otherwise bills will not be accepted.

The work will be inspected by the Third party and the bill will be admitted only after the satisfactory quality report from 3rd party.

The contractor should follow items and conditions as specified in standard bid document KW-1-4

Successful bidder submitting bids below the amount put to tender will required to submit the difference amount in the form of FDR/DD Pledge (excluding Bank Guarantee) on the name of EE PRED BELLARY within 20 days from the date of receiving the letter of acceptance. Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. Cluase 25 of KW-1,2,3 & 4.

The Contractor Should Submit the MDP Receipts for the Material Used for the Work. Otherwise it will attract the Five times fine as per the Mines and Geology Dept

The Contractor shall pay liquidated damages to the Employer at the rate 0.01 % of Contract price per day stated in the Contract Data for each day that the Completion Date is later than the Intended Completion Date. The total amount of liquidated damages shall not exceed the amount defined in the Contract Data

The Period of Completion of 06 Months including Rainy Season

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹37,500

Important Dates

Last Activity

24 Jul 2026

Published

24 Jul 2026

Download Ends

6 Aug 2026

BOQ Preview

•

Construction of Library (elementary schools) to GHPS and GHS Konchigeri village in Siruguppa Taluk

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a prim...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and rem...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat irondiagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...

•

Supplying and fixing sheet metal box made out of 18 SWG sheet Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat...

•

Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box

•

Supplying and fixing PVC/metal conduit Deep junction box 25mm Deep Junction Box

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm Conduit in Brick Walls

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket

•

Supplying and fixing 32A security and energy saving DPswitch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

•

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

•

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...

•

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz &...

•

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated ...

•

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulat...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball...

•

Fixingaceiling /wallmounting fanof all capacities andall types, withnecessaryclampsand 'S' hookmadeoutof15mmdiaMSrod, with5A. ceiling roseofapproved qualitywithnecessarylengthof /0.0076inchPVCinsulat...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-1 28076 Gen.doc

Tender Document • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].