REPAIR MAINT IMPROVEMENT OF LT PANEL UG CABLE ELECTRIC METERS LT DISTRIBUTION SYSTEM AND OTHER CONNECTED WORK IN HD ENCLAVE MH NEW OLD SWARG MANDIR MALCOLM LINE AND SURROUNDING AREA AT MHOW UNDER GE M INF SCHOOL MHOW

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole, foundation, cable trench etc. and getting out in any type of soil complete all as specified and directed.

All as per item No 1 above but for depth exceeding 1.5M and not exceeding 3.0M.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

M&L for Sand cushioning with fine dry unwashed sand in trenches for protection of cables complete. NOTE: Thickness shall be measured after punning.

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat of size 250mm x 150mm x 40mm.

Supplying and lay Old size sub class ‘B’ bricks, laid in trenches as in cable protection complete.

Supply and fix Steel tubes, galvanised, light grade, ISI marked 40mm bore for protection of cable under floor, road and on wall complete.

Supply and fix Steel tubes, galvanised, light grade, ISI marked 80 mm bore for protection of cable under floor, road and on wall complete.

M&L for attending external electric complaints by opening / disconnecting the electrical connection of defective / burnt out underground LT cable of any size & any core from main switch / DB / junction box / LT panel / L T O/H line etc. and taking out the required length of cable from existing loop and remove/ cut the defective cable,replace the same with new cable as per existing size including providing necessary thimbles / connectors at cable end and reconnecting the cable in previous location with existing main switch / DB / Junction box / LT panel / OH line etc. and make electic connection as functionable in all repspects including testing on completion all as specified and directed by Engineer-in-charge. Note:- (A) The rate quoted shall deemed to be inclusive of the following: (i) Necessary earth work excavation in any type of soil, returning, filling and removing extra soil. (ii) Existing bricks, sand,GI protection pipe etc. shall be removed carefully and stacks neatly near site and same shall be re- laid after attending fault/defect. (iii) Distrubed surface of road, floor etc. shall be make good to match with existing surface. (iv) Required numbers of electrician and helper shall be deployed for attending complaints regulerly on daily basis and contractor shall collect the complaints details from complaint cell of AGE E/M No.1 and same shall be rectified/ attanded within an hour and report shall be submitted to Engineer-in-charge or their authorised representative. (B) Please note that payment shall be made to contractor one time only for this items. if any fault/ default occured again on the same location/ DB/junction box/panel during currency of contract, the same shall be rectified by the contractor without any extra cost to Govt. in terms of condition 46 of IAFW of genral condition of contracts. (C) Additional bricks,sand,GI pipe etc. as required for cable protection and cushioning shall be measured and paid separetely under relevent item.

M&L for dismantling / disconnecting / removing the faulty / burnt out overhead conductor of any type / size from insulator of HT / LT pole any type by making proper shutdown from department and removing of tree / branches if any fell on Over Head Line, loose the binding wire in each insulators and disconnecting cable connection as required, remove the burnt / damage conductor / earth wire and making necessary joint with new ACSR conductor of suitable size as per existing as directed, restretching all the loose spans of ACSR conductors, earth wire etc. with insulator and providing binding wire of existing size to tigheting and making LT/HT cable in existing position and make electric connection as functionable in all respects including testing on completion allas specified and directed by Engineer in charge. NOTE: The rate quoted shall deemed to be inclusive of the following:- (i) Tools and plants such as ladder,rope, cutter, axes, knife etc. as required for cutting and removing tree/branches if any fall on OH line. (ii) Insulator,binding wire etc. as required in addition to existing shall be provided by the contractor. (iii) Required numbers of Elecrician and helper shall be deployed for attending complaint regularly on daily basis and contractor shall collect the complaint details from complaint cell of AGE E/M No. 1 (iv) Additional ACSR conductor and earth wire shall be measured and paid separetely under relevant items.

M&L for Trimming/pruning of tree branches touching to the LT over head line or near to the LT over head line as per direction of AGE E/M /JE in charge complete including removing the tree branches from site complete all as specified and directed . NOTE - (a) written shut down shall be obtained from concerned JE / AGE E/M before carrying out the trimming work by contractor (b) Each span from one pole to next pole shall be approx 30M to 50 m. (c) All the HT/LT over head line shall be kept clean through out the contract period by repeatly cutting trimming of tree/ branches as and when grows. However measurment shall be measured and paid only once during the entire contract period. contractor shall quote his rate acorrdingly. (d) T & P such as ladder , rope, cutter , axes and other related material as required for trimming/prining of tree branches shall be provided by the contractor.

M&L for restringing of loose over head conductor/GI earth wire of any size and type after untyeing binding wire from insulators/cross arms to achieve permissible sag limit of over head line including re-fixing of conductor by new binding wire of proper size and pruning of tree branches of concerned spans and jointing of jumpers properly complete all as specified and directed by EIC. Note:- Each span shall consist of 4 over head line including earth wire and length of each span be approximately 30M to 50M.

M&L for maintenance of indoor sub stations, including cleaning of premises and surroundings upto 5m from outer face of wall, checking of oil level of transformers, cleaning and dusting out of transformers, panel boards, cleaning of earth pits to keep free from vegetation etc all as specified and directed by Engr-in-Charge.

All as per item No 14 here in before but for out door sub station including levelling of loose filled aggregate around sub station.

M&L for carriying out periodical services to indoor / out door sub stations by applying one coat of paint as per existing treatment including prepairing the existing surface all as specified and directed by Engr -in-Charge.

S & F in replacement of XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed Note : (a) Excavation shall be measured and paid seperately under respective items (b) Cable lugs of suitable size as required shall deemed to be included in the above quoted rate .

25Sqmm 3.5 core

35 Sqmm 3.5 core.

50 Sqmm 3.5 core.

70 Sqmm 3.5 core.

95 Sqmm 3.5 core.

120 Sqmm 3.5 core.

240 Sqmm 3.5 core.

S&F in repair MCCB 3 pole, 415 volts, adjustable type 160 Amps with breaking capacity 36 KA (Make : ABB, L&T & Schneider)

S&F in repair MCCB 3 pole, 415 volts, adjustable type 200 Amps with breaking capacity 36 KA (Make : ABB, L&T & Schneider)

S&F in repair MCCB 3 pole, 415 volts, adjustable type 250 Amps with breaking capacity 36 KA (Make : ABB, L&T & Schneider)

S&F in repair MCCB 3 pole, 415 volts, adjustable type 350 Amps with breaking capacity 36 KA (Make : ABB, L&T & Schneider)

S&F in repair MCCB 3 pole, 415 volts, adjustable type 400 Amps with breaking capacity 36 KA (Make : ABB, L&T & Schneider)

S&F for 11 KV (E) straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cabe of size 50 to 95 sq mm.

S&F for 11 KV (E) outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE aromoured aluminium conductor cable of size 50 sq mm to 95 sq mm.

S&F for 11 KV (E) indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE aromoured aluminium conductor cable of size 50 sq mm to 95 sq mm.

S&F in repairs straight through joint ( Epoxy joint) for following size PVC insulated and sheathed aluminium cable complete

2 core 16 sqmm to 25 sqmm or 4 core 10 to 16 Sqmm

3.5 core 25 to 35 sqmm

3.5 core 50 sq mm

3.5 core 70 sqmm

3.5 core 95 sqmm

3.5 core120 sqmm to 150 sqmm

3.5 core185 sqmm

M & L for disconnecting electrical connection by making proper shutdown from Department. cutting worn out portion of LT U/G service cables of any type and size, repair including take out of cable from under ground loop and rejoint the same by any size of cable lugs to restore electric supply all as specified and directed.

M&L for disconnecting conductor,insulator,chanel,street light bracket etc from LT pole of height 9 meter and remove LT Pole carefully from ground and shifting the same to other location and refix/ re instate in position with PCC foundation complete all as specified and directed by Engr in charge. Note:- Quoted rate shall be inclusive of necessary of necessory earth work excavation, returning filling, removing of soil from site and PCC foundation complete.

M&L for repairing LT panel board by removing and providing damaged MS sheet, hinges, aldrop bolt etc. including by necessary welding and making good the LT panel board and applying one coat of synthetic enamel paint of existing colour internally and externally complete all as specified and directed

S&F in repair post top lantern 35 watts new generation, energy saving ,environmental friendly ,long life asthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source , 240 volts with IP 65 complete all as specified and directed Make : Havells cat Part No CORALPT35WLED757PSYMTOPC or other equivalent make of Philips/Bajaj.

Supply & install in replacement including foundation of Sturdy LED Bollard with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding with IP 65 including foundation complete all as specified and directed. Make : Havells Cat Part No :-MOUNTBL 10WLED830PSYMTOPMMAM(1.0M) or other equivalent make of Philips/Bajaj.Philips/Bajaj/Wipro

S & F in replacement XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of size 2 core 6 sqmm in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed Note : (a) Excavation shall be measured and paid seperately under relevant items (b) Cable lugs of suitable sizes as required shall deemed to be included in the rate.

M&L for plain cement concrete 1:2:4 type B 2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate) as in roof kerbs or pole coping finished even and smooth, chamferd on edges all as specified and directed.

Supply and fix in replacement LED Solar street light fitting 24 Watt including galvanized steel pole in built,lithium iron battery, solar panel, charge controller with dusk down sensor complete. (Excavation & earth work shall be measured and paid separately under relevant item)

Supply and fix LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fix LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply & Fix in repairs AC three phase keypad based,BIS marked pre-payment static Energy meter ,current rating 10-60 /20-100 A , 240 V (L-N) With bluetooth compatibility and mobile app. Make:- SECURE/L&T/HPL Note :- Old dismantled electric meter shall be deposited at AGE E/M store Yard.

Supply & Fix in repairs AC single phase keypad based,BIS marked pre-payment static Energy meter ,current rating 10-60 /20-100 A , 240 V (L-N) With bluetooth compatibility and mobile app Note :- Old dismantled electric meter shall be deposited at AGE E/M store Yard.

Supply & Fixing in repairs AC Single phasr Electronic KWH Energy meter of rating 5-30 A, class 1.0,240 V,50 Hz,counter type display. Make:- HPL Cat part No SPPC1310000000OC00 or equivalent in SECURE/L&T Note :- Old dismantled electric meter shall be deposited at AGE E/M store Yard.

M&L for attending KWH meter complaints, repair like rectifying loose connections in meter and switch gears, checking and caliberation of meter to ensure proper function, testing, sealing and submission of reading after repair to Engr-in-Charge, all as speciified and direted.

M&L for Earthing complete with galvanised steel earth plate electrode of size 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified including testing on completion.

M & L for Painting to existing steel tubular LT poles, 9mtr long including cross arms, channels, angle iron support, FI clamps etc. with two coats of aluminium paint superior quality of approved make including one coat of primer from bottom or top of pole and making 30cm wide strips( total 5 Nos.) upto 1.5m height from GL with black and yellow paint alternatively including writing pole complete all as specified and directed.

All as per item no. 44 as above but HT steel tubular 2 Pole structure complete.

All as per item no. 44 as above but HT steel tubular 4 Pole structure complete.

S&F busbar chamber loopin loopout enclosure of suitable size consisting of 4 Nos aluminium busbar of 200 Amp, 4 Way fixed on pocelain support inside enclosure,fixing the enclosure with pole using 40 x 6 mm size MS FI clamps of requried shape with bolts,nuts,washers complete all as specified & directed.MAKE:- L&T,INDOASIAN,HAVELLS & C&S. HAVELLS CAT PART NO:- IHBC020004

M&L for Marking of Pole No on Existing HT / LT pole of any type , making 15 cm dia circle with black Synthetic enamelled paint & letter writing of length 8 cm long & 1.5 cm width with white paint complete all as specified & directed by Engineer-in – charge.

M&L for improvement of existing high resistance by treating the earthing pit by pouring of salt water solution made of 20 ltrs of water and 5 Kg of salt in the trench all around the existing earth pit with radious 60 cm from the centre of the earth pit to the centre of the trench a depth not less than 30 cm below ground level all as directed and specified by the Engineer-in-charge

M&L for repair/maintenance of stay by tightening of stay wire after untying the conductor spans from the poles to make correct tension and maintain verticality of pole, including re jointing the conductors in position all as specified and directed.

Supply only DO fuse elements of following capacity

5 to 25 Amps suitable for 11 KV System

30 Amps suitable for 11 KV System

5 to 25 Amps suitable for 33 KV System

30 Amps suitable for 33 KV System

Supply and fix in repair earth continuity conductor or main earthing lead of copper strip of size 32X6mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

supply and laying Cable with copper conductor PVC round sheathed (flexible)industrial cable of size 10 sq mm.

Supply and laying or fixing or passing through pipe in replacement 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 Core, nominal cross section in service connections.

Supply only transformer oil EHV grade as per IS 335 of 1993 Part II in sealed drum and filling/top up of transformer of capacity 63 KVA to 1200 KVA complete all as specified and directed

S.S. Engineers

AGARWAL BUILDERS

Mighty Steel Sales Crop