Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹11.4 L+₹1.5 L (15.6%)Rejected-Finance | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹11.8 L+₹1.9 L (19.4%)Rejected-Finance LEKSHMI NIVAS TELANG ROAD NANDANGADDA KARWAR 581 304 | KARWAR | UTTARA KANNADA | KARNATAKA | 581304 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹12.7 L+₹2.8 L (28.1%)Rejected-Finance | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹13.7 L+₹3.8 L (38.6%)Rejected-Finance | L5 | Rejected-Finance Being not L1 |
Tender Value
₹14.9 L
EMD Value
₹29,860
Closing Date
17 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SB) KARWAR
GE (SB) KARWAR
REPAIRS TO ROLLING SHUTTER STEEL GATES TO OTM ACCN / MD ACCN BUILDINGS AT NAD , VAJRAKOSH , AMDALLI AT NAVAL BASE KARWAR
2024_MES_637867_1
8165/E8
Open Tender
Civil Works
Item Rate
330 days
GE(SB) KARWAR
AS PER NIT
7 documents required · 7 mandatory
₹500
GE (SB) KARWAR
₹29,860
Yes
1 Mar 2024
17 Jan 2024
19 Feb 2024
17 Jan 2024
17 Feb 2024
3 Feb 2024
17 Jan 2024 - 31 Jan 2024
Amount
Taking down rolling shutters of following sizes, replacing worn out/unserviceable parts with new ones, overhauling, applying grease/oil, refixing in position and making functional complete all as directed :- Note : Replacement of parts will be measured and paid for seperately in respective items
(a) Area not exceeding 8 Sqm each
(b) Area exceeding 8 Sqm but not exceeding 12 Sqm each
(c) Area exceeding 12 Sqm but not exceeding 20 Sqm each
(d) Area exceeding 20 Sqm but not exceeding 26 Sqm each
Material and labour for overhauling of rolling shutter of following sizes (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and directed:- Note : Replacement of parts will be measured and paid for seperately in respective items
(a) Area not exceeding 8 Sqm each
(b) Area exceeding 8 Sqm but not exceeding 12 Sqm each
(c) Area exceeding 12 Sqm but not exceeding 20 Sqm each
(d) Area exceeding 20 Sqm but not exceeding 26 Sqm each
Supply and fix in repairs mild steel worn wheel and gear wheel fitted to suspension shaft of the rolling shutter and connecting rod respectively all as specified and directed. Note:- Suspension shaft and connecting rod will be measured and paid for separately.
Supply and fix in repairs Bevel gear box with crank handle fitted to connecting rod all as specified and directed. Note:- Connecting rod will be measured and paid for separately
Supply and fix in repairs 25mm dia mild steel connecting rod fitted to gear wheel and bevel gear all as specified and directed.
Supply and fix in repairs, fabricated lock plate of riveted construction made of mild steel sheet 3.15mm thick and 100mm width, reinforced with mild steel angle of size 40mmx40mmx6mm at bottom and top shall be interlocked with bottom most lath section of curtain all as specifed and directed.
Supply and fix in repairs lath section made from cold rolled steel strips 1.20 mm thick with inter-locking curls at both edges and a deep corrugation at the centre with a bridge depth of not less than 12 mm and each lath section shall be continous single piece with out any welding joint complete all as specified and directed.
Description same all as per item No 7 here-in-before above but 0.9mm thick lath complete all as specified and directed.
Supply and fix in repairs Mild steel clips riveted at either ends and fitted on ends of lath section all as specified and directed.
Supply and fix in repairs Mild steel flat iron 40mmx6mm as in stiffeners in hood cover and stopper to arrest lock plate including necessary welding etc all as specified and directed.
Supply and fix in repairs Mild steel guide channel of size 65mm depth, 25mm width and 3.15mm thick including fixing of cleats or supports (not exceeding 750mm c/c) for attachment to the wall or column by means of bolts or screws all as specified and directed.
All as per items No. 11 herein before but guide channel of size 75mm depth , 25mm width and 3.15mm thick
Supply and fix in repairs Mild steel bracket plate of 3.15mm thick and area n.exc 0.15 sqm in any shape fixed to the wall with hold fast of mild steel angle 40mmx40mmx6mm of length minimum 200mm from edge of the bracket plate embedded with PCC 1:2:4 type B1 bed block of size 250mmx200mmx200mm and fitted with guide channel by means of 20mm square bar of suitable length all as specified and directed.
All as per items No 13 herein before but bracket plate of 6mm thick and area exceeding 0.15 sqm & not exceeding 0.25 sqm complete all as specified and directed.
Supply and fix in repairs Suspension shaft made out of mild steel pipe confirming to IS-1161-1968, medium class 40mm dia all as specified and directed.
All as per item No 15 here in before but 50mm dia complete all as specified and directed.
Supply and fix in repairs Mild steel cranked handle suitable for gear operated type rolling shutter complete all as specified and directed.
Supply and fix in repairs “0 0” gauge helical wire or flat spiral spring fixed with suspension shaft all as specified an directed.
Supply and fix in repairs “0” gauge helical wire or flat spiral spring fixed with suspension shaft all as specified an directed.
All as per item No 19 here-in-before but “2” gauge complete all as specified and directed.
All as per item No 19 here-in-before but “3” gauge complete all as specified and directed.
Supply and fix in repairs suspension shaft cage formed out of 35mmx6mm flat iron complete all as specified and directed.
Supply and fix in repairs cast iron ball bearing for rolling shutter complete all as specified and directed
Supply and fix in repairs mild steel sheet 1.00mm thick as in hood cover of any shape with flat iron stiffeners at both edges and fixed to the bracket plate all as specified and directed. Note : Stiffeners will be measured and paid for separately.
Supply and fix in repairs safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.
Taking down steel gate each leaf area exc 2.0 Sqm but not exceeding 6.00 Sqm with bed blocks, pintle hinges & hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new/old pintle hinges and hold fasts as required and all as directed. NOTE : welding, bed blocks, pintel hinges and hold fasts will be measured and paid for seperatly.
Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed blocks including necessary formwork for embedding holdfasts all as specified and directed.
Supply and fix in repairs mild steel 0.80mm thick plain black sheet in steel gates, cut to size, punched, including round headed screws, clout nails or rivets and fixed to steel frame with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed
Material and labour for Welding in repairs not exceeding 2.5 cm in length and thickness of metal to be welded exceeding 6mm but not exceeding 9mm all as specified and directed.
Material and labour for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
Material and labour for preparation of old treated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantaling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed
Material and labour for mild steel structural framed work confirming to Fe410-W (Gde-E-250) quality-A as in door or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed
Taking down motorised aluminum rolling shutter of opening area exceeding 20 sqm and not exceeding 30 Sqm including hood cover/housing, octagonal tube, end cap, side guide rail, motor and its connected accessories etc and overhauling, servicing, greasing complete including replacement with new aluminum laths etc and reassembling after rectification of defects, fixing back to its original position and making smooth functioning to the satisfaction to Engineer-in-charge complete all as specified and directed. Note:- Aluminum laths will be measured and paid for separately.
Supply and fix in repairs lath section made from rolled aluminium strips 1.00 mm thick double walled inter-locking curls at both edges, 65 mm wide and a deep corrugation at the centre with a bridge depth of not less than 12 mm and each lath section shall be continous single piece without any welding joint complete all as specified and directed.
Material and labour for providing and injecting emulsion for post construction antitermite treatment along the external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling holes and plugging the holes with cement mortar & matching the existing surface etc complete all as specified and directed.
Material and labour for providing and injecting emulsion for post construction antitermite treatment for soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling 12 mm dia holes and plugging the holes with cement mortar (1:2) etc to match with existing floors complete all as specified and directed.
Material and labour for providing and injecting emulsion for post construction antitermite treatment at points of contacts of wood with masonry / concrete surfaces using chemical emulsion mixed with oil or kerosine at the rate of 0.5 litres per hole including drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and plugging the holes with cement mortar (1:2) etc to match with existing surface complete all as specified and directed.
Taking down of cement plaster from brick or stone wall surfaces of any description including raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound finished even and smooth without using extra cement. Note:- Supply only Water proofing compound shall be measured and paid for separately.
M & L for applying two coats of exterior emulsion weather proof paint over a coat of primer including preparation of newly plastered surfaces all as directed.
Supply only approved water proofing compound all as specified and directed.
Taking down steel door (hanger/Tech stores door) each leaf area exc 2.0 Sqm but n exc 6 Sqm with bed blocks, pintle hinges & hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new/old pintle hinges, handles, lock system and hold fasts as required and all as directed. NOTE : welding, bed blocks, pintel hinges and hold fasts will be measured and paid for seperately.
All as per item No 43 here in before but each leaf exceeding 6.00 sqm complete all as specified and directed.
Taking down Collapsible steel gates each exceeding 4 Sqm with pintle hinges, top and bottom runners, channel pickets & hold fasts, rectifying the defects such as straightening, welding, reveting , securing runners with hold fasts and brackets etc and refixing in position with provision of bed blocks, new/old pintle hinges, handles, lock system and hold fasts as required and all as directed. NOTE : Welding, bed blocks, pintel hinges and hold fasts will be measured and paid for seperately.
M&L for servicing of Industrial sliding door Motor and gear box assembly including preventive maint checking of motor parts, capacitor, greasing of the bearing assembly, checking of the coupler between motor and gear box, proper greasing of the gear box, checking for the minor defects in the gear box, proper allignment of the gears and checking of the alignment of the connecting gear with the sliding guide rail assembly all as complete and directed all as specified and directed by Engr-In-Charge. Note: The above quoted rate includes only the labour and minor parts and greasing for the above said Job, all other items fixed are to be measured and paid seperately under relevant items as under
M&L for dismantling and strip opening of burnt out electric motor of capacity 1 HP suitable for operating rolling shutter and rewinding with supper enameled copper wire of existing gauge, number of turns, insulating and heat varnishing, greasing complete including replacement of bushes, bearing check nut, and other required parts and applying two coats of synthetic enamel paint over a coat of red oxide primer to external surface of motor and testing complete all as specified and directed by Engineer-in-charge Note:The above quoted rate includes the transportation, fixing arrangements and capacitor required for the motor aseembly..
Supply of gears of suitable size all as specified and suitable for gear box of the automatic sliding door assembly connected with the motor of cap 1 HP, including servicing, greasing, replacement of old worn out parts/gears and testing complete all as specified and directed by Engr-In-Charge.
Supplying and fixing in repairs of old u/s XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm, 4 Core all as specified and directed by Engr-In-Charge. Note: The above quoted rate includes all the necessary thimbles for the connection at both ends and making good the old disturbed suface complete.
Supply of old U/S 3 phase stater panel assembly complete suitable for sliding door motor of capacity 1 HP including all the connected items and testing the sliding door all as specified and directed by Engr-In-Charge.
M/S. NAVEEN ENGINEERING & CO
LEKSHMI ENGINEERS
H S krishna Electricals
OM SAI ELECTRICALS AND HARDWARES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .