REPAIR AND PAINTING TO STEEL FURNITURE AT BSO FURNITURE YARD UNDER GE 865 EWS

Amount

REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH LARGE 1/2 HANGING (1/2H) 1/2 SHELF (1/2S) (FD-67M ,FD- 1031 & FD-1033)

Removing of old unserviceable 3 way locking device complete of Almirah Large steel /Almirah large 1/2H x1/2S and S&F new 3 way locking device made to shape & size as required and all as specified in drg and directed by Engr-in-Charge.

Removing of existing old locks of Almirah Large steel/Almirah large 1/2H x1/2 S and S&F new locks of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-Charge. Make : Godrej / Harrison /Link/Plaza

Removing of existing old unserviceable handles including necessary nut, bolts, washer etc of Almirah large steel/Almirah large1/2H x1/2S and S&F new chromium plated handles including necessary nut, bolts, washer etc all as specified & directed by Engr- in- Charge.

Taking out existing shelves and refixing in position including necessary nuts, bolts, washers, clips etc for Almirah large steel/Almirah large1/2H x1/2S all as directed by Engineer-in-Charge.

Removing of old unserviceable legs of Almirah large steel /Almirah large 1/2H x1/2S and S&F new legs made out of 1mm thick MS sheet made to shape& size and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-Charge.

Removing of existing old unserviceable shelves of Almirah large steel/Almirah large 1/2H x1/2S and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-Charge.

REPAIR TO ALMIRAH MEDIUM STEEL/ALMIRAH (MEDIUM/SMALL) 1/2 HANGING X 1/2 SHELF (FD-1032, FD-243, FD-1034, FD-114)

All as per Srl item No 1.01, here-in-before but for Almirah Medium Steel/ Almirah (Medium/Small) 1/2 H x1/2 S

All as per Srl item No 1.02, here-in-before but for Almirah Medium Steel/ Almirah (Medium/Small) 1/2 H x1/2 S

All as per Srl item No 1.03, here-in-before but for Almirah Medium Steel/ Almirah (Medium/Small) 1/2 H x1/2 S

All as per Srl item No 1.04, here-in-before but for Almirah Medium Steel

All as per Srl item No 1.05, here-in-before but for Almirah Medium Steel/ Almirah (Medium/Small) 1/2 H x1/2 S

All as per Srl item No 1.06, here-in-before but for Almirah Medium Steel

Removing of old broken/ unserviceable conduit pipe with brackets of Almirah (Medium/Small) 1/2H x1/2 S and S&F new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate brackets of steel made to shape as shown on drawing and directed by Engineer-in-Charge.

BOOK CASE STEEL / BOOK CASE OPEN LARGE (FD-1028 , FD-90, FD-69)

Taking out unserviceable handle and S&F of new chromium plated casted handle of same size as directed by Engr-in-Charge.

Taking out unserviceable locks and S&F new brass lock of approved quality as per Godrej pattern as directed. Make : Godrej / Harrison /Link/Plaza

Opening of shelves and cleats of book case open large and denting of de-shaped portion, welding as required and refixing in same position as directed by Engr-in-Charge.

Removing of unserviceable/broken glass and S&F new glass 3 mm thick of existing shape and size as shown on drawing and directed by Engr-in-Charge. Make : Modiguard/Atul/Swastik.

Removing of existing old unserviceable shelves of Book Case Steel Open Large and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-Charge.

REPAIR TO LOCKER STEEL (FD-257 & FD-1029)

Removing of old broken/ unserviceable conduit pipe and S&F new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drawing and directed by Engr-in-Charge.

Removing of old deshaped/broken Steel shelf and S&F new MS Steel shelf of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint over a coat of primer all as specified and directed by Engr-in-Charge.

Removing of old broken/ unserviceable existing hasp & staples of Locker steel and S&F new hasp & staples of size 75x30x2mm mild steel chromium plated fixed to steel shutter all as shown on drawing and directed by Engr-in-Charge.

Removing of old broken/ unserviceable existing handle of Locker steel and S&F new handle of size 100mm mild steel chromium plated fixed to steel shutter all as shown on drawing and directed by Engr-in-Charge.

Removing of old unserviceable legs of Locker steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of OG paint over a coat of red oxide primer, all as shown on drawing and directed by Engr-in-Charge.

REPAIR TO RACK STEEL SIX/SEVEN SHELVES (FD-129, FD-1038)

Removing existing unseviceable shelves of rack steel and S&F new shelves of 1mm thick MS sheet of required size and shape all as specified and directed by Engr - in- Charge.

Removing existing unseviceable angle iron of rack steel and S&F new angle iron 40x40x4mm thick of required length (Maximum upto 450mm) and shape all as specified and directed by Engr-in-Charge.

Removing existing unserviceable angle iron cut from the cornor of the rack steel and S &F new angle iron cut of size 75 x75 x3mm , made to shape for cornor joiing vertical angle and horizontal mild steel sheet and fixing as per existing ( by welding/ Nut & bolts).

REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/ WITHOUT DRAWER (FD-1008, FD-1007)

Taking down old U/S top of table steel 900 X 600 X 760 mm with drawer/ without drawer and S&F new top of table steel 900 x 600 x 760 mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board /Durian

Taking down old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Repairs to broken mild steel components of table 900 x 600x760mm Steel (with drawer/without drawer) with welding, including replacing broken /worn out legs/ components with new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness 75mm to 100 mm long by running welding all as specified and directed by Engr-in-Charge.

S&F in replacement of rubber shoe for table steel with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

REPAIR TO TABLE STEEL 900 X 900 X 760 MM (FD-1009)

Removing of U/S top and S & F new top 18/19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick teak wood beading all-round the top of table steel 900x900x760mm complete all as specified and as directed. Make : Greenply/Century/Bhutan Board/ Durian

Removing existing unserviceable parts of table 900 x 900x760mm Steel and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness, 75mm to 100mm long by running welding all as specified and directed by Engr-in-Charge.

S&F in replacement of rubber shoe for table steel with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

TABLE OFFICE OFFICERS STEEL (FD-1003, FD- 84 (M), FD-1002)

Taking out U/S Top from Table office offrs steel and S&F new top of size 1680x900mm 18/19 mm pre-laminated partical board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Taking out U/S Top from Table office offrs steel and S&F new top of size 1800x1200mm 18/19 mm pre-laminated partical board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Taking out unserviceable locks and S&F new brass lock after repairing of drawer and cupboard of Table Office Officers Steel size and shape as per approved quality as shown on Drg and directed by Engr-in-Charge Make : Godrej / Harrison /Link/Plaza

Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Removing of existing old unserviceable rubber shoe of Table office officer steel and S & F new rubber shoe of existing size as specified and directed.

TABLE OFFICE CLERK STEEL (FD-1004, FD-84 (M)

Taking out U/S Top from Table office clerk steel and S&F new top of size 1200x610mm 18/19 mm pre-laminated partical board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Taking out unserviceable locks and S&F new brass locks after repairing of drawer of table office clerk steel, size and shape as per Drg as directed by Engr-in Charge. Make : Godrej / Harrison /Link/Plaza

Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Removing of existing old unserviceable rubber shoe of Table office Clk steel and S & F new rubber shoe of existing size as specified and directed .

REPAIR TO CHAIR TUBULAR STEEL WIITH / WITH OUT ARMS (FD-75(M))

Removing unserviceable seats from chair tubular steel with & w/o Arms and S&F 32mm thick Ist class HW seasoned sheesham wood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and 0.3mm thick for seats and 3 to 3.2mm wide & 0.4mm thick border including supply of cane complete all as directed by EIC. Make of cane : Shah/Primier/Ajay

All as per item No 10.01, here-in-before, but back of chair steel tubular

Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest of 1st class hard wood with suitable bolts, nuts and washer

S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair

S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.

Repairs to broken mild steel components of chair tubular steel with/ without arms with gas welding, including replacing broken/worn out components with new 20mm dia MS pipe1.6mm thick.

REPAIR TO TABLE DINING WITH ALUMINIUM TOP (FD- 165M)

Repairs to broken mild steel components of table dining OR's Aluminium top with welding, including replacing broken /worn out components with new parts made of MS square pipe of 25mm x 25mm and 1.6 mm thickness 75mm to 100 mm long by running welding all as specified and directed by Engr-in-Charge.

Removing existing unserviceable top of table dining ORs and providing new top of size 1920 x 680mm made out of 18/19mm thick commercial ply wood duly covered with 24 gauge aluminium sheet,12 Nos screws wood steel CSK of sizes 40mm shall be used for fixing the table top all as shown in drg and as directed by Engineer-in-charge. Make : Greenply/Century/Bhutan Board/ Durian

Complete removal of existing paint by scrubbing the steel surfaces with emery paper so as to make the surface clean and applying two coats black synthetic enamel paint over a coat of red oxide primer.

Removing of existing old unserviceable rubber shoe of table dining OR's Aluminium top and S & F new rubber shoe of existing size as specified and directed .

REPAIR TO CHAIR REVOLVING/ COMPUTER/ EXECUTIVE GODREJ PATTERN (TP,FD/E6/MAP/01)

Dismantling and re-assembling with new components of the following unserviceable part/components of chair revolving steel all as specified and directed by Engr-in-Charge :-

Hydraulic system complete set

Chair leg wheel

Side Arm PVC complete

Foam seat back (minimum 32 density) complete with superior grade of tapestry cloth cover of existing size & shape

Foam seat bottom complete with superior grade of tapestry cloth cover of existing size & shape

PVC Base with wheel complete set

Iron (Steel) Base with wheel complete set

Seat adjustable tilting mechanism complete set

CHAIR WRITING STEEL (FD-360)

Removing of old raxine cloth and S&F of new rexine cloth to both seat and back (upholstery) of existing cushion, cost not less than Rs 300/- per mtr as approved by Engr-in-Charge.

Removing of old unserviceable foam cushion from chiar writing steel and S&F new foam cushion of existing size for seat and back 75mm & 50mm of 32 density respectively fixed over wooden frame covered with rexine cloth cost not less than Rs 300/- per mtr as approved by Engr-in-charge and rest all as per drg . Make : Godrej / Sleepwell /Kurlon

Removing of old wooden arm rest and S&F of new 1st class hardwood wooden arms rest of existing size and shape as specified in drg and directed.

Removing of existing old unserviceable rubber shoe of chair writing steel and S & F new rubber shoe of existing size as specified and directed .

REPAIR TO TABLE BED SIDE STEEL (FD-133(M))

Removing existing unserviceable shutter from table bed side steel and S&F new shutter made to required size and shape of 1mm thick MS sheet all as specifed and directed by Engr-in Charge.

Removing existing unserviceable top from table bed side steel and S&F new top of size 600x380mm made of prelaminated particle board 18mm thick white (exterior grade) with teak wood beading 4mm thick all around the top as specified and directed by Engr-in-Charge. +B99

Repairs to broken mild steel components of table bed side steel with welding, including replacing broken /worn out legs with new legs made of MS round / Square pipe of existing size, 1.6 mm thickness 150mm long by running welding all as specified and directed

Removing of existing old unserviceable rubber shoe/Teo table bed side steel and S & F new rubber shoe/Teo of existing size as specified and directed .

REPAIR TO CHAIR VARANDAH (FD-256)

Repairs to broken mild steel components of chair verandah with gas welding, including replacing broken /worn out legs with new 20mm dia MS pipe1.6mm thick 75mm to 100 mm long

Removing existing unserviceable plastic cane of seat and back of chair Varandah and recaning in mat pattern as per drg complete in all respect with 4/5 mm wide 0.4 mm thick partially rounded plastic cane, white colour of Shah Brand all as specified and shown in drg.

S&F PVC rubber shoe/Toe of best quality after removing the old unserviceable shoe all as specified and directed.

COUCH EXAMINATION (FD-122(M))

Removing of old userviceable planks and S&F new teak wood planks 12 mm thick as specified in drg and as directed.

Revmoving of old unserviceable foam and S&F new foam 32mm density all as directed and as per drg Make : Godrej / Sleepwell /Kurlon

Removing of old unserviceable rexine cloth of couch examination and S&F of new rexine cloth of best quality cost not less than 300/- per mtr as approved by Engr-in-charge and as per drg.

Removing of existing old unserviceable rubber shoe/Teo of couch examination and S & F new rubber shoe/Teo of existing size as specified and directed .

CHARPOY HARD TOP (FD/MAP-II/01)

Removing of existing unserviceable ply top and replacement with new plywood commercial 12mm thick of size 1980x900mm. ISI marked with 10 Nos 65mm round head nuts and bolts with washer to the frame as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Repairs to broken mild steel components ( Stiffener and MS Cleat welded to the frame ) of Charpoy hard top with welding

Complete removal of existing paint by scrubbing the steel surfaces with emery paper and wire brush so as to make the surface clean and applying black synthetic enamel paint over a coat of red oxide primer.

Removing of existing old unserviceable rubber shoe of charpoy hard top and S & F new rubber shoe of existing size as specified and directed .

RACK SIDE 3/4 SPACES STEEL WITH TRAY (FD -97, FD-1023)

Removing of existing old unserviceable shelves of Rack side 3/4 spaces steel with tray and S&F new shelves made of 1mm thick MS Sheet made to shape and fixing by welding to angle iron legs including providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-Charge.

Removing of existing old unserviceable 50mm high partation of top shelf of Rack side 3/4 spaces steel with tray and S&F new 50mm high partation made of 1mm thick MS Sheet made to shape & fixing by welding on top shelf including providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-Charge.

BENCH WORKSHOP STEEL 1800MM X 900MM X760MM (FD-1024)

Removing of existing old unserviceable top of bench workshop steel and S&F new top made of 40mm thick sal wood planks of width not less than 150mm joined together to make flush joints including painting two coats of Oil paint over a coat of primer after preparation the woodsurface, all as specified in drg and directed by Engr-in-Charge.

Taking down old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Removing of existing old unserviceable rubber shoe of bench workshop steel and S & F new rubber shoe of existing size as specified and directed .

BENCH WORKSHOP STEEL 1500MM X 900MM X760MM (FD-1024)

Removing of existing old unserviceable top of bench workshop steel and S&F new top made of 40mm thick sal wood planks of width not less than 150mm joined together to make flush joints including painting two coats of Oil paint over a coat of primer after preparation the woodsurface, all as specified in drg and directed by Engr-in-charge.

Taking down old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Removing of existing old unserviceable rubber shoe of bench workshop steel and S & F new rubber shoe of existing size as specified and directed .

TEAPOY VARANDAH (FD-255)

Repairs to broken mild steel components of teapoy verandah with gas welding, including replacing broken /worn out legs with new 20mm dia MS pipe1.6mm thick 75mm to 100 mm long

Taking down old U/S top of teapoy varandah and S&F new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge. Make : Greenply/Century/Bhutan Board/ Durian

Removing of existing old unserviceable rubber shoe of teapoy verandah and S & F new rubber shoe of existing size as specified and directed .

TABLE STEEL 3050MMx1220MMx760MM (FD-1011)

Removing existing unserviceable Top from table steel 3050mmx1220x760mm and S&F new top 18/19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick teak wood beading all-round the top of table steel as specified in drg and dricted. Make : Greenply/Century/Bhutan Board/ Durian

Repairs to broken mild steel components of table steel 3050mmx1220x760mm with welding as specifed and dricted

Removing of existing old unserviceable rubber shoe of table steel 3050mmx1220x760mm and S & F new rubber shoe of existing size as specified and directed .

M&L for complete removal of existing paint on steel surfaces for the following items by scrubbing and derusting, denting of de-shaped portion and applying two coat of synthetic enamel paint (spray painting) over a coat of red oxide primer incl preparation of surface all as directed by Engr-in-Charge for the following :-

Table office clerk steel

Table Office officers steel

Stool steel 305mm x305mm x510mm high

Stool steel 305mm x305mm x710mm high

Teapoy varandah

Steel rack 6 / 7 tier

Table 900X600 steel with drawer

Table 900X600 steel without drawer

Chair Writing steel with cushion

Table steel 900X900mm

Chair CB steel with or without arms

Almirah large steel with shelves

Almirah med steel with shelves

Book case steel

Filling cabinet steel

Locker steel

Chair Varandah

Table Bed Side Steel

Couch Examination

Rack side 3/4 space steel with tray

Trestle store room steel

Bench workshop steel 1800mm x900mm x760mm

Bench workshop steel 1500mm x900mm x760mm

Table steel 3050mmx1220x760mm

PADMA ENTERPRISES

M/S BAIJ NATH AND SONS