CA NO CE BTZ/BTD/TOKEN/01 OF 2020-21 ADDN/ALTN TO JCO/OR MD ACCN INCL REPAIRS AT BATHINDA MIL STN

Amount

SCHEDULE 'A' (BUILDING WORK INCLUDING INTERNAL SERVICES)

Surface Excavation in loose or soft soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting out in soft/loose soil complete all as specified.

Returning filling in including spreading, levelling, watering & well ramming in layers not exceeding 25cm thick all as specified.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.

Removal of excavated material to a distance exceeding 250m & deposited where directed at level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed.

Solid FRP Door Frame of size 90mm x 45mm with single rebate of 32mm x 15mm to receive shutter moulded with fire retardent grade and saturated polyster resin and choped mat door framed shall be 2 mm thick and fill with suitable block in all the three legs the frame shall be covered with fiber glass from all side MS stay shall be provided at the bottom to steady the frame as per specification and shown in drawing.

Factory made solid panel FRP door shutter 30mm thick (style) glass fibre reinforced plastic panel door shutter of required colour with fire retardent grade and saturated polyster resin moulded to 3 mm thick FRP liminated for forming hollow rails and style with wodden frame and suitable block of seasoned wood inside at reqd places for fixing of fittings cast monolithically with 5 mm thick FRP panel and conforming to IS 14856:2000 as per specified and shown in drawing.

Aluminium anodised 100 mm long, Butt hinges type B-21 with galvanised mild steel screws complete all as specified and directed.

Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening including easening and adjusting complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified and directed.

Factory made pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) complete all as specified and directed.

Pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) complete all as specified and directed.

Pressed steel frames of size 75 X 60 mm for Cupboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed.

PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

2nd class hardwood factory made glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified and directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc. complete all as specified and directed.

300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

Butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.

250 mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

18/19mm thick both side prelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified and directed.

Continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised complete all as specified and directed.

150mm length floor door stopper of aluminium alloy body and tongue, anodised with hard drawan steel spring fixed in floor all as specified and directed.

Aluminium powder coated ventilator including provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note: Glass panes and wiremesh shall be measured and paid seperately under respectively Items of BoQ.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed.

All as per item here-in-above but pin head type, figured glass complete all as specified and directed.

Framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, hand wash basin, cooler stand etc complete all as specified and directed.

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint including preparation of surface complete all as specified and directed.

Preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish from the site as directed complete all as directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 all as specified.

PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removing rubbish from the site complete all as directed.

PCC (1:3:6) type C-2 using 40mm graded aggregare 75mm thick as in plinth protection complete all as specified and directed.

PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair complete all as specified and directed.

Roughning of surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

15 mm thick Screed bed or bedding layer in CM (1:4) complete all as specified and directed.

Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified and directed.

10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile finish etc complete all as specified. Note :- Rendering will be done in coarse sand (Toka sand) only complete all as specified and directed.

Glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specified and directed. Note : Colour and pattern of tiles shall be approved by GE in writing).

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

Marble work (Udaipur green slabs) 15 to 18 mm thick (table rubbed and polished) as in cooking platforms and provide hole for gas pipe like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges over screed bed etc complete all as specified and directed.

Pre-polished kota stone 18-20mm thick as in flooring, cills and stair case over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges complete all as specified and directed. Note : Full piece of kota stone to be used in window cills, tread and riser

Pre-polished kota stone 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

PVC connection 15 mm size of length 600 mm with PTMT nuts of approved quality complete all as specified and directed.

15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed.

Brass chromium plated shower rose 125 mm size with arm and with or without swivel joints to steel pipe or union in repair complete all as specified and as directed.

15 mm bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc in repair complete all as specified and as directed.

Brass chromium plated tubular towel rail, 20 mm dia, D-type, 60 cm long between flanges in repair complete all as specified and directed.

Chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. Make : Jaguar Cat Part No AKP-35731P or equivalent.

15 mm bore fancy type chromium plated bib taps cast copper alloy screwed down, screwed for iron pipe, or for brass ferrule in repair complete all as specified and as directed.

Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

Stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS sheet of 1mm fixed on wall etc complete all as specified and directed.

sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CP brass waste fitting overall size of SS sink 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed.

25mm dia fancy type PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. (Note: The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.)

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

All as per item No 73 above but refixing 15 mm dia, old steel tubing and connections in new or old position wall, ceiling and floors etc complete all as specified and directed.

All as per item No 74 above but refixing 20 mm dia, old steel tubing and connections in new or old position wall, ceiling and floors etc complete all as specified and directed.

Taking down rain water pipe and eaves gutters, any size and pattern including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps of F1 25x2mm complete all as specified and directed.

110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed.

100 mm CI connection socket to fit out let of WC in repairs complete all as specified and directed.

CI cowls 100 mm in repairs complete all as specified and directed.

20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Vitreous China squatting pan of Orrissa pattern of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor in repairs complete all as specified and directed.

PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.

S&F Udaipur green marble slab 18-20mm thick as in corner shelf of 300mm radius including cutting 30mm groves in wall and jointed & pointed with cement slurry mixed with pigment to match with marble and rounding of edges complete all as specified and directed.

Wash hand basin of size 550 x 400 mm viterous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc in repair complete all as specified and directed.

Wash hand basin (in new position) of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

Demolition and breaking upto 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement mortar and laid in trenches incl all fittings & accessories complete all as specified and directed.

150mm dia (internal) SGSW pipes laid in trenches & jointed complete all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded stone agg as in conc bed to drain pipe including packing under & haunching against the sides of pipe 150 mm dia ( internal) after these are laid in trenches complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete all as specified and directed.

Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls and laid in trenches & fixing with clamps complete all as specified.

75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors / fixed to wall complete all as specified and directed.

100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

100mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

Branch pieces, single 100 mm bore, equal or unqual, ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed.

Branch pieces, single 75 mm bore, equal or unqual, ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed.

Bends suitable for 100mm dia CI pipe with duck's foot or heel rest as in repairs complete all as specified and directed.

Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complet all as specified and directed.

Extra Joints over cast iron pipe of 100 mm bore pipes, bend joints. etc is provided lead joints in lieu of cement joint, complete all as specified and directed.

Extra Joints over cast iron pipe of 75 mm bore pipes, bend joints. etc is provided lead joints in lieu of cement joint, complete all as specified and directed.

Providing, precast cement concrete type B1 1:2:4 (20 mm graded aggregate) as in manholes covers, Kitchen sink slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified and directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed.

Cleaning of old Roof / wall concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.50 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and directed.

Lime concrete in lime mortar ratio (1:3) using 40mm brick aggregate laid to slope/ level as directed complete all as specified and directed.

Cement concrete tiles 25cm x 25xcm x 20 to 22 mm thick,with gray cement and no pigment machine pressed; set, jointed and pointed in neat cement slurry over and including 15 mm thick screed in CM (1:6) with and including liquid water proofing compund as per manufacture specifications, as in roof and floor tiles complete all as specified and directed.

Making benching with PCC (1:2:4) type B0 using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : WPC shall be measured and paid separately.

Taking down Cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:6 on internal surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick in cement mortar in 1:4 on external surfaces of concrete surfaces even and smooth without using extra cement & with using integral water proofing compound (as per manufacturer's instructions) complete all as specified and as directed. (Note: WPC shall be measured and paid for separately)

Rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and as directed.

Applying one coat of Dr Fixit pidecrete URP in chajja, staircase or any other surface etc by using 2 Sqm per 1 Kg URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush all as specified and as directed.

Demolition of brick work of any type built in cement mortor in any condition etc complete all as specified and directed.

Brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and as directed.

Demolition of RCC of any description such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed. (Note: Reinforcement cut as required to facilitate demolition)

Reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Use and waste of form work to rough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

Dismantling water tanks of any description exc 250 and n.exc 500 ltrs capacity and removal from site all as specified and directed.

500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.

Dismantling and Refixing old 500 Ltrs capacity Rotational moulded polyethylene water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed.

Complete removal of existing treatment on Old Internal wall surfaces of any desciption, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and applying the following :- (a) M&L for wall care putty in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint as directed complete all as specified (b) M&L for two coat of Oil Bound distemper of approved tint over a coat of primer on old prepared surface by using Airless spray complete all as specified.

Preparation of New plastered Internal wall surface complete all as specified complete all as specified and applying the following:- (a) M&L wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) M&L two coat of Oil Bound distemper over a coat of chalk whitening priming by using Airless spray complete all as specified.

Applying three coat of white wash on prepared surfaces of new plastered surface of wall etc complete all as specified and directed.

Applying two coat of white wash on newly plastered surface of ceiling etc complete all as specified and directed.

Complete removal of existing surface finishes of ceiling and applying two coat of white wash on old plastered ceiling surfaces etc complete all as specified and directed.

Complete removal of existing treatment including filling depression with wall putty two coats on Old external wall surfaces of any description, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following:- (a) M&L two coats of exterior acylic emulsion by using Airless spray and incl a coat of acrylic emulsion external primer complete all as specified.

Preparation of New external plastered wall surface complete all as specified complete all as specified and applying the following:- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) two coat of exterior acylic emulsion by using Airless spray and incl a coat of acrylic emulsion external primer complete all as specified.

Preparation of old steel surfaces of any description over 10 cm width or girth and applying One coat of synthetic enamel paint on existing steel surface complete all as specified and directed.

Applying one coat of synthetic enamel paint on wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces complete all as specified.

Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified.

Rubber sheet 50mm wide and not less than 3mm thick fixed with stainless steel screws at the bottom of the door shutters complete all as specified.

Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

Antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron /plinth etc.,complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified.

Anti termite treatment of voids in masonry using chemical emulsion one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.

Providing precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvres and jallies 40mm thick (measured solid) including all moulding but excluding frames set in cement mortar 1:4 complete all as specified and directed. Note: Pre cast frame shall measured and paid separately.

Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in bressumers, steps quoin blocks (for use with maronry) and set in cement mortar 1:4 complete all as specified and directed.

Providing cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified.

Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc in repair complete all as specified and directed.

Pressed steel shutter for cupboard with sheet thickness not less than 1.2 mm made to shape as shown on drawing with and including locking arrangement, handles and one shop coat painting complete all as specified shown on drawing. Note : Referred drg is applicable for shutter and frame only.

Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing or removal to store.

S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

All as per item here-in-above but refixing 25 mm dia, old steel tubing and connections in new or old position of wall, ceiling and floors etc complete all as specified and directed.

Complete removal of existing plaster over the affected bricks using mechanical means and the affected brick shall be completely exposed for apparent visible effloresence to be first cleaned using hard wire brush and all crystal deposits to be removed , the bricks shall then be cleaned using soft brush of powdery crystals removed than make a 1:4 solution of vinegar and water (1 Part vinegar to 4 parts water) and apply it to the efforescence affected area using a nylon brush and than all the vinegar and water solution to sit on the surface of the affected area for 15 minutes, but not allow the solution to dry and rinse the area with clean water using low pressure jet,two cycles of cleaning using vinger water solutions shall be repeated complete all as specified and directed.

25mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

Pointing of joints cleaned in Srl Item 154 using cement putty made at site using latex/SBR polymer diluted at ratio (1:4) with water, the solution so made shall be used to be mixed with cement to make a putty consistency paste and the cement putty shall be than applied in the joints which are clean and in SSD condition complete all as specified and directed.

Cleaning of pointed surface to remove all dust or deposit by using brush and a undiluted single component acrylic polymer shall be used to prime the brick surface and the primer while being tacky the first coat of water proofing coating is done, second coat is applied after a time interval of 4 to 6 hrs after the first coat has dried, the water proofing coating shall be two component polymer modified cementatious coating having a thickness of 1.5mm in two coats complete all as specified and directed.

Sand filling 25mm thick under floors or in foundation complete all as specified and directed.

60mm thick inter locking PCC block of M-35 as per IS 15658-2006 approved design made out of grey cement and pigment laid complete all as specified and directed.

75mm thick Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Continuous brick edging with width equal to the depth of the brick, laid on end vertically with old size burnt clay bricks of sub class 'B' complete all as specified and directed.

Powder coated aluminium frame for windows with one or more rebate including making holes and providing packing(plastic sleves to hold bar within frame) for MS guard bars within the frame (from end to end), including cleat for fixing etc complete all as specified and shown in drawing.

Powder coated aluminium window and ventilator shutters( sash and wire gauge shutter), top hung/side hung type, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws, powder coated aluminium fittings such as hinge type B-21 100mm long (2 Nos), suitable handle (1 No), tower bolt 100mm (2 Nos), stay (1 No ) for side hung shtter and 2 spring latches for top hung shutters each, complete all as specified and shown in drawing.

40mm brass chromium plated bottle taps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified.

40mm brass chromium plated bottle taps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs complete all as specified.

50mm low density poly ethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed to walls, ceilig or in floors etc complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in cladding to wall/ Crumple Sheet of width min 300 mm wide, with oval shape holes @ 200mm c/c fixed to wall with the help of screws and plastic gitties including one washer per screw complete all as specifed and directed .

40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as spedifed and directed.

Brick work built in cement and sand mortar 1:4 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed.

SFRC (Steel fibre Reinforced concrete cover & frame ) HD-20mm graded rectangular. Internal Size 590X590mm & External size of frame 800X800X100mm including Manhole cover having size 590X590X50mm thick and fixed over existing manhole after demolition of PCC coping & manhole Cover & set in CM 1:4 including PCC benching in (1:2:4) and finishing smooth complete all as specifed and directed.

Fixing only 60mm thick inter locking PCC block of M-35 approved design plain/colour laid over and including 20mm thick sand bed complete as per IS 15658-2006 all as specified and directed.

Dismantling of interlocking tiles laid dry over sand/directly over earth including cleaning and separating stacking of serviceable tiles for further use complete all as specified and directed.

20 mm, stop valve of PTMT any colour screwed for iron pipe and fixed. (Minimum weight 20mm-112gms) complete all as specified and directed.

Applying bituminous aluminium paint @ 0.10 Kgs/Sqm on APP membrance surface complete all as specified and directed.

20mm thick plaster to roof / floor or in vertical in CM 1:4 with WPC finished even and fair complete all as specified and as directed. (Note: WPC shall be measured and paid separately).

Brass chromium plated wall mounted tooth brush holder of Make Jaquar or equivalent complete all as specified and directed by Engineer-in-Charge.

SCHEDULE 'A' (INTERNAL ELECTRIFICATION WORK)

Taking down carefully to existing copper/Aluminum point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing.

Point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid separately under appropriate items of BOQ ).

All as per Srl No.178.00 here-in-before but socket 3 pin 5 Amp 230 volt flush type on same board.

All as per Srl No.178.00 here-in-before but for one socket point out let 3 pin 5 Amp in independent board.

All as per Srl No. 178.00 here-in-before but for call bell point.

All as per Srl No.178.00 here-in-before but for one light point controlled by two two way switch.

All as per Srl No.178.00 here-in-before but for one socket out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor and 2.5 sq mm PVC insulated copper conductor as earth contiuity conductor.

Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Switch piano, flush type single pole, two way 5 Amp complete all as specified and directed.

Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

Bell push 5/6 Amps 230 V AC complete all as specified and directed.

Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Call bell ding dong type AC 230 V complete all as specified.

Sub main two single core PVC copper conductor unsheathed wire multi stranded 4 sqmm including cutting chasing and grouting PVC pipe including Tee, Elbow, Bend etc and including 4.0 sqmm copper conductor single core wire connected by common earth all as specified. Including 20 mm dia concealed PVC conduit, medium grade, ISI marked in replacement complete all as specified and directed. (Note: two lengths of 4.0 sqmm cable and one length of 4.0 sqmm earth cable along with PVC conduit will be measured as one running metre length).

Dismentaling and taking down carefully MCB Distribution boxes including MCBs/isolators of any type and model complete all as specified and directed.

MCB 6-32 Amp SP 10 KA ‘C’ series complete all as specified and directed.

MCB 20-25 Amp SPN 10 KA ‘C’ series complete all as specified and directed.

RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 40A AC type 10kA Four pole 30mA ISI marked complete all as specified and directed.

Sheet metal encloser double door 8 way SPN 230V ISI marked IP 43 complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made complete all as specified and directed.

All as per Srl item No.197.00 here-in-before but 04 way TPN 415 V suitable for provision of FP RCBO as incomer and SP MCB's as outgoing complete all as specified and directed.

LED light fitting (Batten) 1 x 20 watt 4 feet including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes, complete with decorative LED lighting fixture with extruded polycarbonate enviroment friendly, energy efficient. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 10 % lumen output should not be less than 1800 lumens, total input voltage range 140 - 280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin.

LED light fitting (Batten) 1 x 10 watt 2 feet including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes, complete with decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviroment friendly, energy efficient. The system wattage of fitting should not be more than 10 watt ± 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 10 % lumen output should not be less than 900 lumens, total input voltage range 140 - 280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6500 degree kelvin.

Decorative wall light fixture made of polycarbonate suitable for retrofit 10 watt LED lamp, with min 900 lumen output base B-22 complete with & including one lamp 10W LED lamp(base B-22), 6500K, complete all light fittings connection all as specified and directed.

07 watt LED lamp, with min 630 lumen output, CCT 6500K base B-22 complete all as specified complete all as specified and directed.

LED light fitting 1 x 45 watt including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 45 watt ± 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15 % lumen output should not be less than 4050 lumens, total input voltage range 140 - 280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete with accessories GI bracket made out of suitable size of light grade 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts and testing complete all as specified and directed.

Note for item No 199.00 to 203.00:- (a) Tenderer shall submit test report of LED light fitting from Government accredited test laboratory for LM - 79 and LM - 80. (b) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced free of cost in the following case ;- (i) Manfacturing defects. (ii) Failure due to mechanical and electrical impact. (c) All LED light/luminare must meet the provision laid down in IS - 16101, 16102 Part -I/II ,16103 Part -I , 16104 ,16105 ,16106 , 16108/2012 and 15885 Part -II / Section 13.

Angle lamp holder polycarbonate type with back plate complete all as specified and directed.

Ceiling fans AC single phase 230/240 V of size 1200 mm sweep complete with electrical connection providing three core round flexible copper conducter cable of suitable size including writing MES No in red synthetic enamel paint complete all as specified and directed.

Heavy duty metal body exahust fan of 300mm sweep, 240 volt,1400 RPM complete with louvers and shutter including writing MES No in red synthetic enamel paint and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc complete all as specified and directed.

Heavy duty plastic body ventilation fan of 200mm sweep, 240 volt, minimum 1280 RPM complete with louvers and shutter including writing MES No in red synthetic enamel paint and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc complete all as specified and directed.

Dismentaling of unserviceable earthing complete all as specified and directed.

Earthing with galvanized steel earth plate electrode 600x600x6.3mm size burried directly in ground to depth not less than 2.25m below ground level with top edge of the plate not less than 1.5 mtr below normal ground level surrounded with char coal and common salt filling in alternative layers of 15cm thick and connected to GI earth wire 4mm dia by means of nuts/bolts and washers etc made out of galvanized iron including 15mm dia GI pipe light grade for protection of earth wire from earth to distribution board 20mm dia GI pipe medium grade connected to funnel heavy wire mesh for watering purpose including necessary excavation and earth work PCC (1:2:4) type B1 for contrite pit 10mm thick cast iron cover frame all as specified and shown in electric plate Nos 3/ SSR Pt-I and testing on completion complete all as specified and directed.

Taking down carefully existing ceiling fans 1200mm/1400 mm sweep from qtrs, deposite safely to E/M yard store-in-charge, and refixing the fan to respective qtrs after carrying out cleaning all the components of fan, including replacement of nuts, bolts, split pin, rubber reel, capacitor 2.5mfd, & including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete not exc. 01 metre long for each fan, machine screws and painting (applying one coat of red oxide primer and filler and two coat of synthetic enamel spray paint of approved color after scrapping of old paint completely) the fans including mentioning clearly visible MES No etc. complete all as specified and as directed.

Taking down carefully existing electric/electronic meter from qtrs, deposite meters safely to E/M store complete all as specified and as directed.

Supply and fabricating of meter box of size not less than 900mm x 900mm x 150mm , thickeness 2.25 mm double door, single opening with lock arrangement suitable for provision of 04 Nos Electric meter & 01 No TPN DB box complete and including fixing in wall with suitable cutting,cement work including dismantling and taking down of old/unserviceable meter box etc complete all as specified and directed.

Refixing and connecting energy meters retrived under item No 211.00 of BoQ including making electric connection complete all as specified and directed.

Storage type water heater (Geyser) electrical operated 230/240 Volts vertical type 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, 3 core sheathed cable, plug top, and NRV etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation including writing MES No with synthetic enamel paint complete all as specified and directed.

All as per item No 214.00 but of horizontal type.

PVC flexible pipe connection wire braided 15mm size of length 450mm with PTMT nuts and PVC washers on both ends complete for cold water/hot water inlet/outlet line complete all as specified and directed.

S&F wall mounted rechargeable invertor LED batten 20 (+10%) watt, not less than 4 hours backup, efficacy not less than 90 lumen / watt extruded aluminium/polycarbonate, PC diffusor and inbuilt driver & lithium battery complete including making connection complete all as specified and directed. Make : Halonix prime of Halonix or equivalent make of Crompton / Syska / C&S.

SCHEDULE 'A' (EXTERNAL ELECTRIFICATION WORK)

Sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and directed. (Note:- Punned thickness shall be considered for payment purpose.)

Bricks common brunt clay building bricks sub class B as protection layer of UG cable all as specified and directed.

Taking out old unserviceale under ground PVC/XLPE LT cable of any size from treches/wall/roof/road/pipe/pole complete all as specified and as directed.

Supply and laying or fixing and testing of LT cable XLPE, insulated screened, PVC bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with stranded aluminium conductor having cross sectional area 16 Sqmm 4 core conforming to IS-7098 (Part-I -1988) complete all as specified and directed.

GI tubing, light grade, 40 mm bore complete with all fittings for cable protection, fixed along poles or laid on floor etc complete all as specified and as directed.

Making the hole under road and hard standing suitable for laying and inserting pipe upto 100 mm dia any length by mechanical drill system or auger system and making the surface good as existing surface complete all as specified and directed

M/s Kataria Construction Company

ASC BUILDERS PVT LTD.

M/s MITTAL CONSTRUCTIONS

SARJIT SINGH AND CO.

SOM BUILDERS

yogesh kumar contractor

Krishan Lal Doomra

M/s Amit Construction Company

Dasmesh Buildcon