8610 CERTAIN REPAIR TO PLINTH PROTECTION, HARD STANDING, GATES ETC AND REPAIR/REPLACEMENT/CLEANING OF SEWAGE LINE, MAN HOLES, SEPTIC TANKS, SOAKAGE WELLS ETC IN ZONE A AREA OF AGE B/R-II UNDER GE (CENTRAL) PUNE

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground and inclusive of removal of debris out side defence land or removal to store complete all as specified and directed.

Dismantling fencing wire mesh, any type and inclusive of removal to store complete

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F MS flats as bands, straps, supports or stays for securing chain link fencing to angle iron posts and welded to post in PCC during embedding complete

S&F Mild steel screws bolts (machine made) with hexagonal or square heads at one end and screwed at the other end, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long and dia diameter of neck 5 to 10mm complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type as directed by Engr-in Charge.

Fixing only chain link, fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wir 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossing with and provision of galvanised mild steel wie, staples or steel pins etc as directed each line wire to be measured) complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork and including demoiltion of existing precast cover slab for manholes complete all as specified and directed

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced including cleaning the premises and removal of rubbish out side the MD land complete all as specified and directed.

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 and including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and removing of rubbish out side MD land complete all as specified and as directed.

M&L for brick work with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and including removing of rubbish out side MD land complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 including demolition of old brick work / Stone masonary / PCC block masonary built in cement morter of any description and including removing of rubbish out side MD land complete all as specified and as directed.

Extra over stone walling for hammer dressing with maximum depression 40 mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed.

M&L for Providing 25mm thick,using 12.5 mm graded stone aggregate precast cement concrete louvres and jallies,Type B0 1:2:4 setting in CM 1:6 including all mould- ings and including dismantling of existing jallies complete all as specified.

M&L for provinding cement concrete (1:2:4) B-1 using 20mm graded stone aggregate as in copings /haunching/ bearing course over brick walls etc and like complete all as specified.

M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

Taking down Cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, any description including rubbish out side MD land complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement complete all as specifiwd as directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer over external wall surfaces complete all as specified and as directed.

Demolition and breaking of drain pipes 75mm to 110mm bore dia, (AC / CI / PVC etc ) set in cement mortar or adhensive complete all as directed.

S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

.ditto- but 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) bends complete all as specified and directed.

S&F 75mm PVC (SWR)bends complete all as specified and directed.

S&F in repairs PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) cowl 75/100mmdia as required complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete all as specified and directed.

Scooping & taking out sludge, sullage and foreign materials from manhole, septic tank, soak wells of any description and depth including removing and refixing of accessories and appliances required for safe disposal of sludge, sullage and foreign materials either by carrying the same in covered van / trolley outside defence land and disposed off at such place which is not determinated to public health complete all as directed. Note :- Depth shall be measured for payment after bailing out water and the rate quoted demmede to be inclusive of cost required for bailing out water.

Cleaning of manholes not exc. 1.5 Mtr deep including desludging and dewatering either by mechanical pump or manually and taking out solids / semi solids, well flushing with water, removing to a distance upto 250 Mtr and depositing in ditches including necessary excavation and earth work in soft / lose soil for making ditches over after the sludge are deposited spreading and levelling of excavated soil in the ditches over the sludge and removing surplus soil to a distance exc. 50 Mtr and sprinkling bleaching powder (including supply of bleaching powder) in a periphery of one metre around manhole complete all as directed.

All as per item No. 39 above but depth exc. 1.5 Mtr and not exc. 3.00 Mtr complete all as directed.

Cleaning and rodding the blocked sewage line of 150mm bore dia to any depth till the smooth flow of sewage line is restored including plugging of manholes temporarily as and when required and washing down complete sewage line with water including removing sludge and foreign materials from manholes in line and refixing manhole covers and rodding complete all as directed.

All as per item No. 41 above but 200mm bore dia complete all as directed.

All as per item No. 41 above but 300mm bore dia complete all as directed.

Taking down grating and cleaning blocked Nahani trap / floor trap / gully traps of any size by rodding or vaccume pump and refixing grating after clearing of blockage complete all as directed.

Cleaning blocked water closet of any description by rodding or vaccume pump complete all as directed.

Note for item No 38.00 to 45.00 :- (a) Day to day maintenance and petty repair of sewage line (complaints pretaining to safaiwala) by attending daily complaints lodged by the users through IVRS / mobile / sms / or email and manual registratering of complaints at B/R complaint cell of AGE B&R-II on all working days (except sunday, National holidays and closed holidays) by deploying safaiwala daily, complete all as directed (a) Each complaint shall be completed within 24 hours. (b) If safaiwala not attended complaint within time frame mentioned above 50 % shall be deducted job completed by him. (c) The contractor will be responsible to maintain daily job completed by the safaiwala deputed by him in the sub work and obtained signature of I/C complaint cell / Engr-in-Charge daily at 1700 hours on all working days.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth for foundations, manholes etc and getting out in hard / dense soil complete all as directed.

Excavation in trenches not exc 1.5 Mtr wide and exceeding 1.5 Mtr depth but not exc 3.00 Mtr depth for foundations, manholes etc and getting out in in soft / disintegrated rock complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as directed.

Removing the excavated materials (soil) to a distance n. exceeding 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as directed.

M & L for 150mm bore dia RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of complete all as specified and as directed. Note :- Laying of sewage line in running sewage water & temporary diversion / plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate quoted shall deemed to be included in the item including Demolition and breaking up RCC drain pipes 150mm bore dia set in cement mortar and removing debris from the site complete all as directed.

All as per item No 50 above but 200mm bore dia complete all as directed.

All as per item No 50 above but 300mm bore dia complete all as directed.

M & L for M & L Cement Concrete bed to drain pipes, 1:4:8, type D-2 using 20mm graded stone aggregate including forming cradles; in for 150mm bore dia pipe all as specified and as directed .

All as per item No 53 above but for 200mm bore dia pipe all as specified and as directed .

All as per item No 53 above but for 300mm bore dia pipe all as specified and as directed .

Cutting into existing manholes for connecting new drains of 150/200/300mm bore dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as directed .

S & F in repairs 75mm bore dia PVC floor trap with SS grating including jointing with solvent cementof complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removal of debris out side defence land complete all as directed .

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M&L for Glazed ceramic tiles including 10 mm rendering CM 1:4 in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including dismantling floor heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement incl taking down existing GI/CPVC/UPVC pipe etc complete all as specified and directed.

S&F in repairs vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, jet spray , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed.

S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of pre-painted cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, including 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

S&F in repairs 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Essco Cat part No –TQT-512 and equivalent Make: Jaguar,Marc, Cera

S&F in repairs 15 mm angle cock ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Essco Cat part No –TQT-526N and equivalent Make: Jaguar,Marc, Cera

S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repairs chromimum plated 15mm bore pillar taps with capstan head (but fancy type) screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nuts screwed for iron pipe and fixed all as specified.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using (40mm graded stone aggregates)in surface channels and drains all as specified andte directed.

M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded coarse stone aggregates) as in hard standing/road crossing area of sewage line as directed by Engineer-in-charge Complete all as specified.

SARATH ENTERPRISES (BID ID -3378682)

shiva traders (BID ID -3377303)

SAI TILES ARTS (BID ID -3377926)

P K ENTERPRISES (BID ID -3377804)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3377681)

SHREESAMARTH CONSTRUCTION (BID ID -3377338)

L.T Associate (BID ID -3377246)