Construction of Five Storey Hostel block including Mess cum dining Hall in the ground floor and Separate toilet bathroom block for Bn Hqrs Ajas Bandipora Block D Phase 3rd for 1 Coys of the Bn

Amount

Earthwork in excavation by manual means in trenches for foundation, drains, pipes, cables’ etc (not exceeding 1.5 M, in width)and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, depth up to 1.5M including disposal of excavated earth up to 1mtrs from cutting edge, disposed earth is to be leveled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) crushed including curing complete and all carriages and cost of materials involved.

Providing and laying in position reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) in suspended floors, balconies, landings and staircase having upto 15 degree slope. excluding cost of centering, shuttering, finishing and reinforcement. All work upto floor V level including all carriages and cost of material involved.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. Including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form work for columns, pillars, piers, Abutments, Posts and struts

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form work for stairs (excluding landings) except spiral stair cases

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages and cost of materials involved upto site of work complete.

Extra for Brick work above plinth level upto floor V level in cement mortor 1:6 (1 cement :6 coarse sand) including all carriages and cost of materials involved upto site of work complete.

Providing hoisting and fixing trusses/ purlins/ rafters/ posts/ post-plates or like components including cost of screws,nails etc. complete. 1st class budloo wood.

15 mm cement plaster 1:6 (1cement: 6 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including all carriages and cost of material involved.

6 mm cement plaster 1:4(1cement: 4 coarse sand) finished with a floating coat of neat cement on the ceiling including all carriages and cost of material involved.

Providing and fixing of 10mm dia 150mm long bolt with nuts and washers for truss strip including all carriages and cost of material involved.

Providing and fixing of wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position (Silver wood).

Providing & fixing factory made uPVC of desired colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frames, sash and mullion (wherever required extruded profiles duly reinforced with 1.60 +-0.2mmthick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (desired powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and neccessary stainless steel screws etc. profile of frame & sash shall mitred cut & fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame & adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size & of approved quality & including glazing, sillicon filling all complete as per approved drawing & direction of engineer-in-charge.

Providing & fixing coated galvalume Hi-rib profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch using self drilling and self tapping fasteners of reputed make with purlins sheet using self drilling and self tapping fasteners (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing & Fixing flashings, valleys and ridges of colour coated galvalume plain sheet of required width using self drilling and self tapping fasteners of reputed make complete as directed. (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing of 300 x 35mm thick Ist class kail wood eves boarding incl cost of nails.

Providing and fixing of 12 mm thick panelling including cost of frame work by way of using 2'x3" Budloo wood including cost of nails and scaffolding for soffits complete job.

P/F of 50mm x 50mm thick budloo wooden cornice fixed with nails.

Dry random rubble masonery with hard stone in foundation and plinth using quarry stone with bond stones. Including all carriages and costs of material involved.

P/F of Green/ White Pista Marble flooring / skirting, pillars, stairs. etc. with 20mm nominal thick set in 20 mm nominal thick cement ( I cement 3 coarse sand joints finished with white cement incl. rubbing and polishing to the required finish complete.

Providing edge moulding to 18 mm thick Granite/ marble stone counters, vanities etc incl machine polishing to edge to give high gloss finish etc. (Double Moulding)

Providing and laying VC shield Vitrified tiles 8-10mm thick, scratch & strain resistant with high abrasion resistant glaze equivalent to group-25 or VC shield of Somany make or equivalent, sample to be approved by Engineer-in-charge. Size of Tile 600 x600 mm including all carriages and cost of materials involved upto site of work complete.

P/F 25mm thick kota stone slabn with 20mm nominal thick set in 20 mm nominal thick cement ( I cement 3 coarse sand joints finished with white cement incl. rubbing and polishing to the required finish complete.

Providing and fixing of 35mm paneled or paneled and glazed shutters for door and clearstory windows incl. ISI marked black enameled MS But hinges with necessary screws using 2nd class Kail Wood.

P/F of 12 mm dia heavy duty Powder coated Superior quality Hardware Items as directed by EIC

Tower bolt 150mm

Handle 150mm

Al Drop 250mm

Providing & applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete including all carriages and cost of material involved.

Preparing plastered surfaces with Cement based wall putty of approved brand and manufacture, on new surfaces including all carriages and cost of material involved.

Distempering with oil bond washable distemper of approved brand and manufacture to give an even shade New Work (two or more coats over) and including priming coat with cement primer including all carriages and cost of material involved.

Finishing walls with water cement paint of approved brand and manufacture on new works including applying one coat of water thinable cement primer of approved brand and manufacture on wall surface including all carriages and cost of material involved.

Providing and fixing of following size of PVC (Prince make) Fitting ISI Marked

100mm dia Door Tee

100mm dia Plain Bend

100mm dia Collar.

100mm dia P-Trap

100mm Door Bend

100mm dia Plain Tee

100mm PVC Prince Cliff

100mm x 75mm dia Reducer

100mm 45 deg Bend

75mm 45 deg Bend

75mm dia Door Bend

75mm dia Door Tee

75mm dia Plain Bend

75mm dia Collar.

75mm dia Floor Trap.

75mm dia Plain Tee

75mm PVC Prince Cliff

75mm dia PVC Cowel Caps

50mm dia PVC Elbow

50mm dia PVC Tee

Providing and fixing of following size of PVC (Prince make) Pipe including C/O (B-Type, specified adhesive.

100mm dia Pipes PVC Prince.

75mm dia Pipes PVC Prince.

50mm dia Pipes PVC Prince.

Providing, laying and fixing heavy duty Glass Fibre reinforced PPR (Polypropylene Random- Copolymer) pipes & Fittings of approved quality with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing, unions etc. including necessary excavation, backfilling, fixing with clamps, drilling holes in walls, slabs, hydraulic testing complete job.

16mm dia

20mm dia

25mm dia

32mm dia

40mm dia

Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve (Ball Valve), of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., to complete the job.

16mm dia

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.orrisa pattern including all carriages and cost of material involved.(580x440mm)

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: including all carriages and cost of material involved.

Providing and fixing CP Wall Mixer ( Non Telephonic) with all accessories heavy (Standard make)

Providing and fixing CP Basin Mixer with all accessories heavy (Standard make)

Providing and fixing of vitreous wash basin with MS brackets complete of standard make. (630x450)

Providing and fixing Stainless Steel Sink of size 18" x 24" heavy (Standard make) (610x460mm)

Providing and fixing CP short body Bib Cock heavy (Standard make)

Providing and fixing CP Angle valve (Standard make)

Providing and fixing CP waste Coupling

Providing and fixing PVC Waste pipe

Providing and fixing of 6" geyser bolts of standard make

Providing and fixing CP Soap case.

Providing and fixing of CP Grating with Anti Cockroach trap below the grating hinge type.

Providing and fixing 15mm dia 2"- 3" long CP nipples.

Providing and fixing PVC connection pipe upto 24" long.

Providing and fixing CP Towel Rod

Providing and fixing CP Towel Ring

Providing and fixing CP cup

Providing and fixing looking Mirror (Belgium Type)

Providing and fixing of Steel Shelf of Suprior quality

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

Supply and installation of satin finish stainless steel AISI 304 stainless steel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge) weight 3.70 kg, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent. Height shall be 1050 mm above the finished skirting level complete as per architectural drawings, pattern & design to be approved by Engineer-in-charge.

Supply and installation of satin finish stainless steel AISI 304 stainless steel Posts having 100mm dia tube, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at corners complete, as manufactured by Dline or approved equivalent & shall be fixed above the finished level complete as per architectural drawings.

Construction of Brick masonry manholes using 2nd class bricks in 1:6 mix including plastering /CI frame with cover, Complete Job of following sizes.

Supplying and laying of following size pvc conduits

25mm dia

32mm dia

Supply and fixing of M.S. fan boxes M.S. of ISI mark including iron staples/ saddles / screws recessed in RCC Slab

Supply and fixing of Junction boxes of ISI mark including necessary screws recessed in RCC Slab

M/S GHULAM AHMED GANIE

GULZAR HUSSAIN

M/S MOHAMMAD SULTAN WANI