WBPWD/EE/HED/NIT- 88 of 2025-2026

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.[D-3/4a]

315 A on angle iron frame (Make L&T)

Supply, delivery and installation & testing of cubical type compartmentalized dust and vermin proof Floor cum wall mounted L.T. distribution panel, Tentative size 1400x1200x300 mm or suitable higher size from CPRI approved manufacturer, made of 2 mm (14 SWG) thick C.R.C.A M.S. sheet reinforced with (40x40x6 mm) angle iron frame work with individual incoming and outgoing compartment having hinged & gasket door with locking arrangement in such a fashion that it can not be on unless the feeder remains in off position and providing suitable ventilation arrangement. The complete panel board shall be painted in seven tank process by powder coating paint, colour siemens white. The interconnection between Incoming switch and BBC should be done with tinned copper strip and BBC to all outgoing switches interconnection should be done with suitable size copper cable and other accessories including suitable stud connectors, socketing etc as required and A separate continuous Gl earth busbar of size 50mm x 6mm shall run across the full length of the panel board. [NS]

All electrical equipment are to be properly earthed with suitabie size G.I. wire & earthing by nut, bolt in the body complete with base channel. The base of panel board should rest on frame work (75x40x5 mm). The control panel will have suitable cable entry from bottom through cable gland plate to access sufficient no. of cables as per direction of E.I.C. the panel comprising with following switches. The complete panel board is to be installed on suitable brick padestal & All incoming/outgoing switches is to be properly labelled on Acrylic sheet as per direction of EIC. (An Auto Cad Drawing of the panel has to approved by EIC before making of panel) (Main/Raw Panel)

INCOMING: 415V, 315 Amp, TPN switches disconnector fuse with 3 no HRC fuse - 01 Nos (Make: L&T/ABB/Siemens)

BUSBAR: 415V, 415Amp 4 nos 50x5mm, copper bus-bar with necessary nos of holes and different colour insulating tape on epoxy bus support.- 01 set

OUTGOING:415V 160 Amp TPN switches disconnector fuse with 3nos HRC fuse- 06 Nos(Make: L&T/ABB/Siemens)

Metering arrangement :- (i) Multifunction meter ( Make - L&T) - 01 no

(ii) RYB indicating lamp (Siemens or L&T make) complete with sliding fuse- 03 Nos

(iii) El danger board (6"x4") - 01 No

(iv)Supplying and fixing 240/415 V 6A SP MCB of Breaking capacity 10kA & C characteristics on din rail and making necessary conection for auxilliary power supply of voltmeter & ammeter-03 Nos

Supplying and fixing double door Vertical TPN MCB Distribution board with IP-42/43 protection for MCCB incomer & TP MCB as outgoing, on din rail of DBs and necessary connection as mention below, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as to G.S. (Make: L&T/Legrand/Seimens) [D-11/15+D-8/10+D-6/7]

(i) 8 way VTPN DB with 01 nos 415 V, 160A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting and 07 nos 415 V, 63A TP MCB, 03 nos 240 V, 6-32A SP MCB of Breaking capacity 10kA & C characteristics incl. 1 no. cable end box.

Supplying and fixing 6 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make: Legrand / L&T / Siemens] Incoming: 4P 63A MCB Isolator Outgoing: 18 nos. 6-32A SP MCB [D-10/14+ D-5/6 D6-7]

Supplying and fixing double-door 2+12 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make: Legrand / L&T / Siemens] Incoming: 32A DP MCB Isolator Outgoing: 8 nos. 6-32A SP MCB [D-9/13+ D-5/6+ D-6/7]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/Finolex/RR Kabel/Gloster) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for orizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch ( Make- Legrand / ABB(E) / L&T / Siemens) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average Run 8 Mtrs [E-25/4(c)]

Average Run 10 Mtrs [E-25/4(e)]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/Finolex/RR Kabel/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm)single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch ( Make- L&T/ Siemens/ ABB(E)) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works On Board [E-24/3a]

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket ( Make- Legrand / ABB(E) / L&T / Siemens ) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[E-18/9a]

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch ( Make- Legrand / ABB(E) / L&T / Siemens ), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/12]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket ( Make- Legrand/ ABB(E) / L&T / Siemens ) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/9b]

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [D-12/17]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 63 A on existing angle iron Frame.[D-3/4(a)]

Supply and fixing of (W1.5' xL3') or suitable size frame structure, fabricated with (40x40x6mm) angle iron and flat iron frame as required on wall or ground for fixing of MCB Enclosure and starter with minor civil work as per direction of EIC and as per sample.[NS]

Supply of Street light Wattage: Max. 45W, Lumen output: Min. 120 lm/W, die cast aluminium housing, Driver rating should be higher than the bfitting rating. Make: Philips, Wipro, L&T or manufacturer with own NABL accredited lab with valid test certificate.[NS]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [C-3/18]

Supply & fixing of 240V indoor industrial Highbay light Luminous efficasy: 150lm/W (Min) with suitable clamping arrangement incl necessary interconnection as per direction of EIC.[Wipro/Philips/L&T] [NS] 100 watt

Supply and Delivery 240V 50Hz , 600mm sweep, speed 1400-1440rpm Wall Mounted full Metal Body, heavy duty Air circulator fan (Bracket Type) (Make: EPC/Cinni/Crompton) [NS]

Supply and Delivery 240V 50Hz , 450mm Wall Mounted full Metal Body, fan (Bracket Type) (Make: EPC/Cinni/Crompton) [NS]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length. [C-4/29]

Supply & Delivery of 240Volt, 50Hz ac Full Metal Body Heavy Duty Exhaust fans. (Make-Crompton/Orient/EPC) [NS]

30 cm (12")(Speed: 1400 rpm)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making onnection for exhaust of following diameter:

(a) 23 cm (9") [C-4/28(a)]

(b) 30 cm (12") [C4-28(b)]

Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

23 cm Exhaust fan (9") [D-14/32(a)]

30 cm Exhaust fan (12") [D-14/32(a)]

Supply & Delivery of 450mm 1400 RPM Full metal body PEDESTAL FAN Make:Crompton,Orient,EPC (HEAVY DUTY) [NS]

Supply and delivery of following 1.1 KV grade XLPE armoured cables (Make:Polycab/RR Kabel/ Gloster) [NS]

4 Core 185 Sqmm

4 Core 70 Sqmm

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. [F-2/1(b)]

Laying of cable 4 core 185 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.[NS]

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire. [F-3/6]

From 70sqmm to 150sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy. mending good damages and painting. [F-1/2(d)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [F-4/7(c)]

4 Core 185 sqmm

4 Core 70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.[F-5/8(b)]

4 Core 185 sqmm

4 Core 70 sqmm

Supply & Fixing of perforated 200x50x1.25mm (18SWG) GI cable tray With 25x25x3mm angle iron support with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.[D-14/34(a)]

Supply & Fixing of perforated 200x50x1.25mm (18SWG) GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.[D-15/34(b)]

Supplying and fixing 25mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.[E-16/7(b)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab/Gloster/RR Kabel/Finolex) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

4x56/0.3 (10 sqmm) + 2x36/0.3 (6 sqmm) as ECC (VTPN DB to Weleder and Three phase Machine) [E9-C1-x]

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC (VTPN DB to Single Phase machine) [E9-C1-v]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC ( Power plug and Computer Board) [E9-C1-s]

3x36/0.3 (1.5 sqmm) as ECC (1 X 6A) [E9-C1-b]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]

Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [G-1/1a]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe. [G-1/2(a)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.[G-2/4(b)]

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [G-3/5(d)]

ADD GST @ 18%

ADD LWC @ 1%

Please Enable Macros to View BoQ information