S I T C of 160KVA Silent type DG set along with accessories and Cables at Regional Office, Lucknow.

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-I E&M DSR 2025

NIT Number CWC/RO-LKO/Engg./26-27/02T

Name of Work S/I/T/C of 160KVA Silent type DG set along with accessories & cables at Regional Office, Lucknow.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-I E&M DSR 2025 1328261

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 20,64,250.42

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule -II: E&M MR ITEMS

NIT Number CWC/RO-LKO/Engg./26-27/02T

Name of Work S/I/T/C of 160KVA Silent type DG set along with accessories & cables at Regional Office, Lucknow.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule -II: E&M MR ITEMS 879830

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 8,79,830.00

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Price Bid ( Summary Sheet)

NIT Number CWC/RO-LKO/Engg./26-27/02T

Name of Work S/I/T/C of 160KVA Silent type DG set along with accessories & cables at Regional Office, Lucknow.

NAME OF CONTRACTOR

Sd.-I SCH_I (E&M DSR 2025) 1328261

Sd.-II Sch_II (E&M MR) 879830

Grand Total (In Figures)

Grand Total (In Words)

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : S/I/T/C of 160KVA Silent type DG set along with accessories & cables at Regional Office, Lucknow.

Schedule A DSR 2025 based E&M Items

SLNo Description Qty Unit Rate Amount DSR-2025 No.

1 Supplying, Installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. and consisting of the followings:

(A) Diesel Engine:

Tourbocharged Diesel engine 4 stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 0C, 50% RH & at 1000 Meter MSL , capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per CPWD specifications.

(B) Engine mounted Instrument Panel fitted with and having digital dis Plate for following:

(i) Start-stop switch with key

(ii) Water temperature indication

(iii) Lubrication oil pressure indication

(iv) Lubrication oil temperature indication

(v) Battery charging indication and Voltage indication

(vi) RPM indication

(vii) Over speed indication

(viii) Low lubricantion Oil trip indication

(ix) Engine Running Hours indication

(C) Alternator: Synchronous alternator rated of appropriate KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 0C, 50% RH & at 1000 Meter MSL. The alternator shall be having Screen Protected Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically balanced rotor, capable of taking 10% over loading for one hour after 12 hours of continuous operation, self cooled,self-excited and self-regulated through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for tropical conditions and with class- H insulation.

(D) Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.

(E) FUEL TANK: Daily service fuel tank of suitable liters capacity as per CPWD Specifications, fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.

(F) Exhaust System: Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor.

(G) Starting System: 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable numbers of batteries (180 AH capacity lead acid SMF type) as required as per specifications. The battery shall be housed inside the acoustic enclosure of DG Set.

(H) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable connection/connection through bus-trunking. Such arrangements on acoustic enclosure should be water proof & dust-proof conforming to IP-65 protection. The enclosure shall be as per CPCB IV + or better norms etc. and as per CPWD specifications.

(I) AMF Panel: Free standing floor mounted IP 42 automatic mains failure control panel including auto by-pass, suitable for KVA as below for silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication/ Ethernet /RS485/SNMP port open protocol for BMS integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by Engineering in charge and including the following:

1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip.

2. Auto/Manual/Test/Off selector switch

3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay).

4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L- N & L_L), kW, kVA (Phase & Total), Frequency, KWH, PF.

6. LED Indicating lamps for load on mains and load on set

7. Fuse/ MCB for instruments

8. Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.

9. Main supply failure monitor

10. Supply failure timer

11. Restoration timer

12. Control unit with three impulse automatic engine start/stop and failure to start lockout.

13. Impulse counter with locking and reset facility.

14. ON/OFF/Control circuit switch with indicator

15. Audio/Video annunciation for (i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

16. Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable number of relays and accessories

17. Maintenance notification based on Engine Run Hour & due date. 18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel , interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start / auto stop depending upon load status and requirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring.

2 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. 2 set 15004 5.6

3 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. 2 set 8351 5.4

4 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. 10 meter 1638

5 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 10 meter 755 5.11

6 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : S/I/T/C of 160KVA Silent type DG set along with accessories & cables at Regional Office, Lucknow.

Schedule A MR based E&M Items

SLNo Description Qty Unit Rate Amount DSR No./MR

1 Supply , Installation of 1100V Grade PVC insulated , PVC sheathed GI wire armored Aluminium/ copper standard conductor , Cable of following sizes to be laid in on wall complete with dressing saddling clamping etc. Including civil work and required accessories

(a) 3½ Core 185 sq.mm 1.1 KV Grade Aluminium Armoured Cable 60 meter 1274 MR

2 Providing, fixing & installing MS class-C exhaust pipe and all fixing accessories and hardwares. The exhaust pipes shall be insulated with 75 mm thick mineral wool (density 64 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge aluminium sheet including all hot dip galvanized support structural as required. Flexible bellows for exhaust piping shall be considered as per manufacturer's recommendation

(a) 200 mm dia 10 meter 9676 MR

(b) 250 mm dia 10 meter 11328 MR

3 Supply and fixing of MS supports of different sizes for laying exhaust pipe which includes supply and fixing of fixing accessories like clamps, bolts and nuts, anchor fasterns etc with required civil works as applicable. M.S.Supports to be painted with one coat of zinc chromate primer and 2 coats of epoxy paint with Civil Foundation 2000 kg 248 MR

4 Daily service Intermediate fuel tank of 500 litres capacity fabricated out of 3 mm thick MS sheet with height as per Req. 1 each 97350 MR

SLNo Description Qty Unit Rate incl GST Amount

1 125 KVA KOEL Old DG including removing & fright charges incl GST 1 Each 107000

Central Warehousing Corporation (A Govt. of India Undertaking)

REGIONAL OFFICE

Pre-Qualifying (PQ) Proforma: Bidder Information Summary {To be Filled by Bidder in sheet uploaded over portal and then to be submitted along with technical bid}

ENIT NO:CWC/RO-LKO/Engg./26-27/02T

Name of Work :- S/I/T/C of 160KVA Silent type DG set along with accessories & cables at Regional Office, Lucknow

Name of the Bidder *Mandatory

SL Description Details (filled by Bidder)

See PQC S/n (1) to (4): Appendix-II of NIT

1 Name of the Bidder

1.1 Bidder Address, (registered)

1.2 Bidder Organization ID /CIN in case of Company

1.3 Bidder Telephone number

1.4 Bidder E-mail address

2 Type of Bidder constituent (Organization)

(JV not allowed where estimated cost of work put on Tender is up to Rs. 30 cr)

2.1 Attested copy of documents in support of Bidder Organization Type

(See ITB-Appendix IV clause number 3.2: 1 (b): Organization Details and Appendix-II of NIT: List of documents required in support of Bidder Legal Entity.

2.2 Current List of Directors/Partners: as applicable

3 Name of the person holding the power of attorney for this Bid

3.1 Designation

3.2 Contact details of person holding the power of attorney

3.3 Attested Copy of Power of Attorney to sign & submit the Tender (as per format given in EXHIBIT-III of Appendix-II)

4 Earnest Money Deposit (EMD) of Amount as mentioned in APPENDIX-1 (TIS) through NEFT/RTGS

5.1 PF Registration code number of Bidder

5.2 COPY of PF Registration number of Bidder

6.1 GST Registration code number of Bidder

6.2 COPY of GST Registration number of Bidder

7.1 PAN of the Bidder

7.2 COPY of PAN of Bidder

8.1 Whether Enlisted /Empaneled with CPWD/ MES/ Railway/ PWD/ CWC/any other PSU etc. if any,

8.2 Copy of Enlistment/Empanelment certificate Submitted or Not

9 Whether Bidder is executing or completed any work awarded by CENTRAL WAREHOUSING CORPORATION in Past Three FY Year (FY 2023-24, FY 2024-25 & FY 2025-26) and Current FY 2026-27.

10.1 Affidavit along with this PQ Performa (EXHIBIT-I) on NJS paper signed and submitted after filling necessary details.

10.2 Declaration of near relatives (EXHIBIT-IV) submitted.

Technical Eligibility Criteria:

See PQC S/n (5) in Appendix-II of NIT for details & qualifying limits.

11 Particular Technical Experience w.r.t. Similar Nature of Work:

11.1 Brief of Similar Nature Work Experience-1

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.2 Brief of Similar Nature Work Experience-2

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.3 Brief of Similar Nature Work Experience-3

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

See PQC S/n (6) in Appendix-II of NIT for details & qualifying limits.

Information on Financial Capabilities & Turn over

12.1 Annual Financial Turnover-Total Revenue (Income) (as per CA certificate and audited P&L Account)

iii FY 2023- 24

iv FY 2022–23 (only when audited turnover for FY 2025-26 is not available)

12.2 The average of financial turnover for the last three financial years i.e. FY 2025-26, FY 2024-25 and FY 2023-24 Or FY 2022-23 (FY 2022-23 to be referred only when Audited turnover of FY 2025-26 is not available)

1. Tenderers have to fill complete details in Pre-Qualifying Performa (Bidder Information Summary) in sheet uploaded over tender portal.

2. Documents pertaining to the above details should be scanned and uploaded on e-tendering website at the time of on-line tender submission.

3. RTGS/NEFT E-payment Challans with UTR no. duly authenticated by Bank may also be scanned & uploaded along with tender submission.

4. Bidder must refer Tender Information Summary (TIS) in APPENDIX-I, PRE QUALIFICATION CRITERIA (PQC) in (APPENDIX-II) and Tender eligibility criteria as per ITB clause 3 (APPENDIX-IV) appended with NIT before filling this PQ Performa and Affidavit.

5. The PQ Performa EXHIBIT-I along with Its Annexure (Affidavit) enclosed with this Performa is mandatory and must be submitted by the Bidder.