SPECIAL REPAIR OF BLDG NO P-36 INCLUDING OR BATHROOM AND TOILET AT URI LINES IN DAMANA MIL STN UNDER GE JAMMU

Amount

Taking down chowkats or frames with shutter w/o taking off shutter from the frame not exceeding 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving's not exceeding 15 cm thickness (below or above ground level) and removing unserviceable material exc 100 mtr complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quions, arches, pillars etc. complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc complete all as specified and as directed.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. complete all as specified and as directed.

Dismantling of PVC, cast iron 100mm or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches. If required. complete all as specified and as directed.

Dismantling of PVC, cast iron 75 mm or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches. If required. complete all as specified and as directed.

Dismantling/disconnecting/demolition of water storage tank of any type or description PVC exc 500 and n.exc 1000 Ltrs capacity and removing from site or refixing in position. complete all as specified and as directed.

Taking out the roots of trees/ shrubs of any girth from the surface of bldgs and making good the damaged portion to match with the existing surface in CM (1:3) or with PCC (1:2:4) or Brick work in CM 1:4 and finally finishing the surfaces to match with the existing surfaces complete all as specified and as directed.

M&L for brick work of old size sub class ‘B’ bricks straight or curved on plan exceeding 6mtr mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

All as per Ser item No 10 here-in-before but except bricks complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. Note : From work required for this item included in the unit rate of this item.

Hacking out old broken glass of any thickness, size, quality or description from the wooden/ steel frames glazing with puttyor fixed with wooden beads complete all as specified and as directed.

S&F 3.0 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads nails etc. to wooden surfaces as in square n exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F MS butt hinges 75 mm long medium weight cold rolled complete all as specified and as directed.

S&F aluminium tower bolt of size 150 mm complete all as specified and as directed.

S&F aluminium handle of size 125 mm complete all as specified and as directed.

S&F 20 mm dia Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe anf fixed (min wt 210 gram), screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded aggregate) for laying floor finishes complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450x300x7 to 10 mm thick , fixed on walls with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy grout complete all as specified and as directed. Note: The ends of corner tiles at all horizontal and vertical joints shall be mitered/provided with PVC corner strips whichever found aesthetic and approved by GE at ground,to match the edges properly.There should not be any voids behind the any tiles. The epoxy grout to be filled to a depth equal to half the thickness of tiles. The rates quoted shall be deemed to be all inclusive.

M&L for non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors/Skirting etc. set, jointed and pointed with tile adhesive anti slip white @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Epoxy tile grout(or equivalent) to the floor of toilets and bathroom complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid over and including cement screed base 15 mm thick in cement mortar 1:6, and roughening the surface including cutting as required, rubbing and polishing to granite finish over complete all as specified and as directed.

M&L Granite (of any type) 16-20mm thick (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screedbed in cm1:6 edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering of 10 mm thick in cement morter 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and as directed.

Capillary rise treatment of walls, Consumption base coat: 0.3 Kg/Sqm, Second and Third coat : Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalent, Consumption top coat: 3 Kg/Sqm, System requirements : density : 2.00 Kg/Ltr, Compressive strength: 0.5 N/Sqmm. complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick cement plaster 1:6 on other than fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick cement plaster 1:3 on fair faces of concrete surfaces as in ceiling, chajja, shelves etc. finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster 1:3 on other then fair faces of concrete surfaces as on facia of roof slab, chajja, shelves etc. finished even and smooth without using extra cement (incl all necessary scaffolding, lifting arrangment for three story building on external surfaces) complete all as specified and as directed.

S&F PVC (SWR) P trap 110/110 mm bore fixed in repairs complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls / floor etc complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls / floor etc complete all as specified and as directed.

S&F PVC (SWR) Bends / Tee / Y 110mm dia any radius with access door fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) Bends / Tee / Y 75 mm dia any radius with access door fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) reducer of 110 mm dia fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore fixed in repairs complete all as specified and as directed.

S&F WC Orissa pattern white with integral foot rest 580 x 440 mm including PCC bedding 1:2:4 and making good disturbed floor connecting to trap and flush pipe fixed in repairs complete all as specified and as directed.

S&F vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc fixed in repairs complete all as specified and as directed.

S&F Vitreous china urinal, half stall type, white (minimum),with including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long and PVC waster pipe 32mm bore fixed in repairs complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms). complete all as specified and as directed.

S&F Vitreous china wash hand basin white ,flat back of size 630x450mm including cutting for and pinning in ends of brackets or erecting stand fixed in repairs complete all as specified and as directed.

S&F PVC low level flushing cistern 10 Ltr capacity white with inlet ball value, float valve and handle inc brackets, PVC flush pipe fixed in repairs complete all as specified and as directed.

S&F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipes of 15 mm bore complete all as specified and as directed.

S & F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodised, fixed with rawl plugs fixed in repairs complete all as specified and as directed.

S&F Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore fixed in repairs complete all as specified and as directed.

S&F stop valve/angle valve cast copper chromium plated screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe fixed in repairs complete all as specified and as directed.

S&F brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore fixed in repairs complete all as specified and as directed.

S&F stop valve cast copper chromium plated concealed type screwed down high pressure with capstan head suitable for 15 mm bore fixed in repairs complete all as specified and as directed.

S&F stainless steel gratings of outer frame dia 150 mm open able type incl all necessary fitting such as hinges including embedding in tiles with white cement fixed in repairs complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) inlcuding taking down 15mm steel tubing complete all as specified and as directed.

S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) inlcuding taking down 20mm steel tubing complete all as specified and as directed.

M&L 75 mm thick PCC type C2 1:3:6 (40mm graded aggregate) as in Plinth protection filled with mastic filling and 10 mm wide joints between the walls and plinth protectin shall be filled with mastic filling complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank with float valve, plastic lid cover, double layered, cylindrical verticl with closed top hoisted and fixed in position of capacity 1000 Ltr incl making connections complete all as specified and as directed.

S&F stop valve 20 mm dia cast copper alloy, secrewed down high pressure with crutch or butterfly handle secrewed both ends for iron pipe and fixed fixed in repairs complete all as specified and as directed.

One coat of synthetic enamel paint tint over old painted steel surfaces over 10 cm in width or girth including preparation of old surfaces of steel complete all as specified and as directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified complete all as specified and as directed.

M&L for two coats of oil bound distemper of wall to newly plastered surfaces over chalk whitening including preparation of surfaces complete all as specified and as directed.

Preparation of surfaces new plastered surfaces & applying three coat of white wash on walls complete all as specified and as directed.

Preparation of surfaces old plastered surfaces & applying two coat of white wash on walls complete all as specified and as directed.

M&L for one coat of oil bound distemper of wall to old plastered surfaces including preparation of surfaces complete all as specified and as directed.

Preparation of old plastered surfaces including filling of small holes etc and applying two coat of white wash on ceiling surface complete all as specified and as directed.

Preparation of surfaces new plastered surfaces & applying three coat of white wash on ceiling complete all as specified and as directed.

M&L for two coats of cement base paint to newly plastered surfaces including preparation of surfaces and priming plastered surfaces with alkali resistant priming paint complete all as specified and as directed.

M&L for one coat of cement base paint to old plastered surfaces including preparation of surfaces complete all as specified and as directed.

Complete removal of existing roof treatment or roof tile and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and as directed.

Cleaning of the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufacturers method statement by Berger Home Shield crackfill paste/ Asian Smartcare Crack seal fill or equivalent along with Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalent & cement in mixing ratio of 1:4 where ever required complete all as specified and as directed.

Providing cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate ) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges finished even and smooth without using extra cement complete all as specified and as directed. Note : From work required for this item included in the unit rate of this item.

M&L for Rendering 15 mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth without using extra cement up including mixing liquid water proofing compound complete all as specified.(Note- liquid water proofing compound shall be measured and paid separately) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Berger Home Shield PU Roofkoat/ Asian Smartcare PU Aqua or equivalent is a one component liquid ,solvent free ,cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties. (i) UV resistant, prevent yellowing and weathering. (ii) Highly elastic upto 350% and crack bridging. (iii) Excellent adhesion on porous and non-porous substrates. (iv) Tensile Strength >10 N/Sqmm with GeoTextile fleece. (v) Solar Reflective Index (SRI) more then 109-111 ASTM E1980-11. System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer(or equivalent), Coverage : 0.2Kg/Sqm (with 50% dilution of water), Reinforcement: Geotextile 40 gsm, Second coat: Berger Home Shield PU Roofkoat/ Asian Smartcare PU Aqua or equivalent, Consumption: 0.5 Kg/Sqm, Third coat: Berger Home Shield PU Roofkoat/ Asian Smartcare PU Aqua or equivalent, Consumption : 0.8 Kg/Sqm. System buildup -1.5Kg/Sqm with geotextile of 40 gsm

Glass fibre reinforced modified cementitious coating system before the final coat of Berger Home Shield Latex Shield 2K / Asian smartcare Professional Damp Block 2K or equivalent in Sunken treatemen. Base coat : Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalent, Consumption base coat : 0.3 Kg/Sqm, Reinforcement : Glass fiber, Second and Third coat :Berger Home Shield Latex Shield 2K / Asian smartcare Professional Damp Block 2K or equivalent, Consumption top coat: 3 Kg/Sqm, System requirements : density: 2.00 Kg/Ltr, Compressive strength : 0.5 N/Sqmm. (i) Wall penetration through the RCC slab must be sealed using Berger Home Shield crackfill paste/ Asian Smartcare Crack seal fill or equivalent. (ii) Intersection of base slab with wall must be provided with a 50 mm fillet using Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalent modified mortar with a bonding coat of Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalent) modified cement slurry upto 1.5 Mtr. (iii) All depressions, unevenness, surface honeycombing shall be repaired using Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalentx) modified polymer mortar with a bonding coat of Berger Home Shield Advanced Latex Plus/ Asian smartcare Repair Polymer (SBR Latex) or equivalent modified cement slurry, including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed.

M&L cement concrete type E-2 1:5:10 (40 mm graded brick aggregate) as in sunken portion complete all as specified to receive floor toping as specified after carrying out the required tests of water proofing complete all as specified and as directed.

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down carefully unserviceable DBs of any type/size with MCBs and disconnecting and making good disturbed surfaces complete all as specified and as directed.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length incl taking down old wiring complete all as specified and as directed. Note : Wiring shall be done in proper colour coding.

M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed.

All as per item No 82 above but for multi 5 pin 5 amp socket outlet on same board ISI marked complete all as specified and as directed.

All as per item No 82 above but for multi 5 pin socket outlet 5 amp socket on independent board ISI marked complete all as specified and as directed.

All as per item No 82 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 sqmm as earth wire FRLS pvc insulated in green color complete all as specified and as directed.

S&F for Socket, 6A - 5 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

S&F for Modular switch 1 module 6A,1 module , 240 volts ISI marked complete all as specified and as directed.

S&F for Modular ceiling rose, 3 Pin/PVC/polycarbonate isolated body ISI marked complete all as specified and as directed.

S&F for Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and as directed.

S&F for Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI marked complete all as specified and as directed.

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. .

S&F in replacement LED lights fitting 1x 10W, 220V, AC decorative box type complete with LED tube rod 10 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed. Note:- Distribution board and MCBs should be same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 AMP Complete with connection testing and commissioning complete all as specified and as directed.

MALIK CONSTRUCTION (BID ID -3414528)

SHARMA CONSTRUCTION COMPANY (BID ID -3414460)

M/S VED PAUL MAHAJAN (BID ID -3414778)

Hare krishna engineering const. (BID ID -3413630)

HARNAAM DASS & CO (BID ID -3412204)