Providing Fire Fighting Arrangements

Amount

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD /EQUIVALENT. dcomprehensive service and maintenace of lift for the 2 years of beyond the warranty period Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make:OMEX / KARTAR/ LIFE GUARD / SAFE GUARD /EQUIVALENT. comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.omprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to rol one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX /EQUIVALENT.omprehensive service and maintenace of lift for the 2 years of beyond the warranty period ,omplet all. Complete complying with relevant Standard specification and as directed by Dept.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to ssary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.comprehensive service and maintenace of lift for the 2 years of beyond the warranty period ,Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.omprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’,elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.omprehensive service and maintenace of lift for the 2 years of beyond the warranty period omplet all. Complete complying with relevant Standard specification and as directed by Dept officers.

150mm dia

100mm dia

80mm dia

65mm dia

25mm dia

Wrapping and coating anti-corrosive treatment for thefollowing under ground MS pipe having one coat of anticorrosivemetal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods (150mm dia) comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept . officers.

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. (Make: NORMEX / KARTAR /EQUIVALENT-100mmcomprehensive service and maintenace of lift for the 2 years of beyond the warranty period ,)

150mm dia

100mm dia

Supply of stainless steel metal finished ball valve with fittings of screwed type. 25NB for hose reel drum comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept . officers(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing)

Supply, erection, testing and commissioning of cast iron body and gun metal or stainless steel Internal Non-Return Valve of size of 80mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,Complet all. Complete complying with relevant Standard specification and as directed by Dept . officers(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing)

80mm Dia

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR /EQUIVALENT.comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing)

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT. comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept . officers(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required. a. End suction, top discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg. / sq. cm at highest and farthest outlet at specified flow of 2280 LPM at 70m head conforming to IS 1520. b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dyanamo, solenoid switches etc. c. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc. (Make: Kirloskar / Equivalent). comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , the design and brand should be got approved by CE before execution of work. d. Exhaust system having flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessory MS support arrangements from wall or ceiling as per site condition. e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop seleneid for auto stop in the event of fault with audio indications, painted with post office red colour etc., as required. f. 12 V / 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common base plate, coupling guard,foundation bolts etc., as required. g. Positioning the diesel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement.All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent)

Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent). The rate inclusive of necessary vibration, bad mounting etc., comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.The design and brand should be got approved by CE before execution of work.

Supply, erection, testing and commissioning MonoBlock type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges.,etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent) comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , the design and brand should be got approved by CE before execution of work.

Supplying, erection, testing and commissioning of Diesel Engine Pump Main Control Panel & Jockey Pump including necessary auto cut-in, cut-off and manual operations, battery charger switch arrangements,voltmeter, ammeter and running indication siren provision, wall mounting type, etc., comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.

Supply, installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. comprehensive service and maintenace of lift for the 2 years of beyond the warranty period Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent) comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complyingwith relevant Standard specification and as directed by Dept. Officers(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / quivalent) comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent) comprehensive service and maintenace of lift for the 2 years of beyond the warranty period , Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers. (The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Supply and laying of following sizes of Armoured Aluminium / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing) Make: (POLYCAB / PARACON / FINOLEX / which ever higher end brand should be permitted.)

2 core 1.5 sq.mm. armoured copper cable

3 core 95 sq.mm. armoured aluminium cable

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing) Make: EXCELLENT / SAFETY FIRST / EQUIVALENT.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc. Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers. Make: HGURU / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers. Make: NORMEX / KARTAR /EQUIVALENT-100mm dia

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting racket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers. (The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing)Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply, installation,Testing and commisioning of Emergency Light with LED and 8 hours Battery backup etc.,Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing)

Supply and kept in position of 9 lit capacity fire buckets of 4 Nos with bucket stand etc., Complet all. Complete complying with relevant Standard specification and as directed by Dept. Officers.(The Quality and Brand of the fittings should be got approved from the Executive Engineer before fixing).

Sub Total