CONSTRUCTION OF 200 BEDDED GIRL'S HOSTEL (G+3) IN THE CAMPUS OF GOVT. POLYTECHNIC AT MUZAFFARPUR FOR THE YEAR 2025-26 (ELECTRIFICATION INCLUDING).

BUILDING DIVISION MUZAFFARPUR

NAME OF WORK :- CONSTRUCTION OF 200 BEDDED GIRL'S HOSTEL (G+3) IN THE CAMPUS OF GOVT. POLYTECHNIC AT MUZAFFARPUR FOR THE YEAR 2025-26 (ELECTRIFICATION INCLUDING).

BILL OF QUANTITY

Estimated Cost :-15,77,81,583.00 Last Date of Sale of BOQ :-

Cost of BOQ :- 10,000.00 Date of Tender :-

Earnest Money:- 25,77,900.00 Time of Completion :- 15 MONTHS

SL Code ITEM Qty UNIT Rate Amount

CIVIL+S.T+CAMPUS+BOUNDARY WALL+UG TANK

1 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth…. 3641.62 cum 314.90 1146746.00

2 2.27.1 Extra for every additional lift of 1.5 m or part thereof in : 940.17 cum 49.40 46444.00

3 2.26 Filling available excavated earth do - do all complet job 1757.60 Cum 123.90 217767.00

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing…. 2276.14 cum 287.30 653936.00

5 11.72 Providing B/F soling do - do all complet job. 3240.31 Sqm 283.30 917979.00

6 4.1.3 Providing and laying in PCC of specified grade exluding the cost of centring and shuttering-all work upto plinth level…. 243.05 cum 3998.10 971733.00

7 4.12 Extra for Providing and mixing water proofing material do - do all complet job 15359.31 Kg 57.16 877938.00

8 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 0.00

5.33.1.1 All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 1353.33 cum 5063.40 6852461.00

9 5.33.2.1 All works above to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 1587.75 cum 5863.20 9309296.00

10 5.22 Reinforcement for R.C.C Work do - do all complet job 0.00 0.00

A. 5.22.7A TMT bars TMTC-500-8mm dia. 67069.94 Kg 94.50 6338109.00

D. 5.22.7D TMT bars TMT Fe-500-I6mrn dia. 128823.75 Kg 91.70 11813138.00

E. 5.22.7E TMT bars TMT Fe-500-20mrn dia. 60558.00 Kg 91.70 5553169.00

11 5.9.1 Centring and shuttering of Foundation… 1348.49 Sqm 211.60 285340.00

12 5.9.3 Suspended floors, roots, landings… 4771.99 sqm 437.50 2087745.00

13 5.9.5 Lintels, beams, plinth beams, griders… 3800.18 sqm 404.70 1537933.00

14 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 3242.99 sqm 494.40 1603334.00

15 5.9.7 Stairs,(excluding landings) except spiral-staircaces. 233.78 sqm 439.90 102840.00

16 5.9.19 Weather shade,Chajjas, corbels etc. including edges 462.60 sqm 550.90 254846.00

17 5.9.16 Edges of slabs and breaks in floors and walis- 0.00 0.00

18 6.1.14c Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 223.93 cum 4923.00 1102426.00

19 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Extra for brickwork in Superstructure 935.19 cum 5765.20 5391557.00

20 6.45.2 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) 2548.41 sqm 700.80 1785929.00

21 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) 2548.41 sqm 113.60 289500.00

22 13.12.2 15 mm Plastering with cement mortar (1:4)etc all complete job. 5668.72 sqm 176.40 999963.00

23 13.11.2 12 mm Plastering with cement mortar (1 :4) etc all complete job. 12719.72 sqm 152.90 1944845.00

24 13.24.1 Providing 6 mm cement plaster to ceiling of mix 1:3(1 cement: 3 coarse sand) 5404.76 sqm 131.30 709645.00

25 13.17.1 Providing12 mm thick Cement Plaster (1:3) with Floating Coat of neat cement etc all complete job. 456.65 sqm 203.60 92974.00

26 13.80 A.2 White cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered…. 22757.79 sqm 105.40 2398671.00

27 13.46A.1 Finishing walls with Acrylic Smooth exterior paint of required shade Finishing walls with Acrylic Smooth exterior paint of required shade 5668.72 sqm 132.50 751106.00

28 13.92.1+ 13.78.2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 18060.96 sqm 125.10 2259427.00

29 21.3.3 Providing and fixing glazing in aluminium door do - do all complet job 25.20 sqm 1285.60 32397.00

30 21.1.1.2 Providing and fixing aluminium work for door do - do all complet job 214.20 Kg 418.40 89621.00

31 21.4.1 Providing and fixing double action hydraulic floor spring do - do all complet job 14.00 Nos 2283.80 31973.00

32 26A.1 Aluminium and Supplying aluminium extruded tubular do - do all complete job. 581.63 Kg 370.40 215434.00

33 5.18.1 Providing and fixing 50mm precast R.C.C jali (1:2:4) do - do all complete job. 28.80 sqm 1062.70 30606.00

34 10.3 " Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer" 12.66 sqm 6303.40 79801.00

35 10.5 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete including applying a priming coat of approved steel primer 0.00 0.00

10.5.1 Using M.S. angle 40x40x6 mm for diagonal braces 9.41 sqm 3653.00 34375.00

36 9.136 Providing and fixing fire resistant door frame do - do all complet job 81.30 M 1462.70 118918.00

37 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutter do - do all complet job 45.36 sqm 6445.00 292345.00

38 9.138.1 Providing and fixing glazed in fire resistant door shutter do - do all complet job 45.36 sqm 31796.00 1442267.00

39 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),... 0.00 0.00

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of(small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension 462.78 sqm 9471.00 4382989.00

40 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) 1805.94 kg 546.80 987488.00

41 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). 0.00 0.00

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 613.88 M 1182.90 726159.00

42 26.88 Providing and fixing factory made single extruded WPC {Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm', modulus of elasticity 850 N/mm' and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing withstainless steel butt hinges of required size with necessary full body threaded star headed counter sunk 5.5 screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary 5.5 screws shall be paid separately) 0.00

43 10.37.1 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. 214.20 sqm 471.70 101038.00

44 9.168 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges {hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) 422.10 sqm 2733.00 1153599.00

45 9.171 Providing and fixing stainless steel soft closing spring hinges at O degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge 1206.00 Each 220.40 265802.00

46 9.170 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 0.00 0.00

47 10.1 Structural steel work in singal section fixed all complete. (Grill For Window & Main Gate)… 13739.25 kg 88.30 1213176.00

48 13.81.3 Providing and fixing bright finished brass peg stays 300 mm long of minimum weight 330 gms.to side hung steel windows with necessary welding and machine screws etc. complete 2576.00 Each 182.70 470635.00

49 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws 0.00 0.00

50 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ),transparent or dyed to required colour or shade, with necessary screws etc. complete 0.00 0.00

51 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 0.00 0.00

52 9.101 Providing and fixing aluminium hanging floor door stopper, ISInmarked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete 0.00 0.00

9.101.2 Twin Rubber Stopper 174.00 Nos 60.80 10579.00

53 9.103 Providing and fixing bright finished brass 100 mm mortice latch andlock, ISI marked, with six levers and a pair of anodised (anodiccoating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete 174.00 Nos 655.40 114040.00

54 13.81.1 Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 620.56 sqm 39.70 24636.00

55 13.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New Wood Work 620.56 sqm 83.50 51817.00

56 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New Steel Work 1883.11 sqm 83.50 157240.00

57 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 1226.44 sqm 795.00 975020.00

58 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 297.32 sqm 686.80 204199.00

19 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixedwith pigment to match the shade of the slab including rubbing and polishing complete Base with 1:1:1 (1lime1surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse san 0.00 0.00

60 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 s 200.43 sqm 1334.90 267549.00

61 11.31 Extra for pre finished nosing in treads of steps of kota stone/ Sand stone Slab....do....E/I. 417.60 M 82.90 34619.00

62 11.32 Extra for kota stone/ Sand stone in treads of steps and riser using single up to 1.05 M length ....do....E/I. 187.93 sqm 18.10 3402.00

63 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete 0.00 0.00

64 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 0.00 0.00

65 8.13 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 0.00 0.00

8.13.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 61.54 sqm 3605.20 221864.00

66 8.3 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge 0.00 0.00

8.3.2 Granite Work 82.03 Mtr 260.10 21336.00

67 8.9.1.2 Stone Tiles Work For Wall Lining do- do all complete job. 45.36 Sqm. 2112.20 95809.00

68 22.3 "Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni)." 462.34 sqm 480.60 222198.00

69 22.8 "Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs,balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge." 0.00 0.00

22.8.1 " With average thickness of 120 mm and minimum thickness at khurras point to be 65 .." 1072.33 Sqm. 850.70 912231.00

70 22.21 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 1072.33 Sqm. 85.20 91363.00

71 12.56X Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS- 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge 1072.33 Sqm. 1349.90 1447538.00

72 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing 280.00 Nos 165.40 46312.00

73 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 213.86 sqm 436.60 93371.00

74 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron…. 285.15 mtr 1087.90 310215.00

75 12.39 Making Khurras 45 x 45 Cm do - do all complete job. 20.00 Nos 189.40 3788.00

76 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern … 4747.48 mtr 47.10 223606.00

77 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron…. 175.20 mtr 1087.90 190600.00

78 5.1.2 Providing R.C.C (1:1.5:3), M20 grade ……………all complite job. 13.43 cum 4688.30 62940.00

79 19.19.4 Providing and fixing in position precast R.C.C mainhole ……………all complite job. 4.00 Nos 1393.20 5573.00

80 19.15.2 Providing M.S. foot rests including fixing in manholes ……………all complite job. 8.00 Nos 296.30 2370.00

81 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. 707.35 Sqm 444.80 314629.00

82 16.42 Concrete Pavement - Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 141.47 cum 4649.00 657694.00

83 11.79.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver locks as per required size and pattern, finishing and weeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern. 256.50 Sqm 956.40 245317.00

84 8.2.2.1 Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining in c ement mortar 1:3… 50.71 Sqm 4242.90 215157.00

85 2.8.1 E/W in Excavation in foundation trenches with all cost as per spn & dir of E/I. 141.23 cum 360.70 50942.00

86 5.9.2 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. 115.20 Sqm 375.10 43212.00

87 13.26 Supplying and fixing C.I. cover without frame for manholes :560mm dia C.I Cover(heavy duty) 63.52 Sqm 40.50 2573.00

88 19.18.3 Supplying and fixing C.I. cover without frame for manholes :560mm dia C.I Cover(heavy duty) 2.00 Each 6918.30 13837.00

89 Carriage of Materials 0.00 0.00

(ii) Coarse Sand 2476.64 Cum 2653.10 6570772.00

(iii) Stone Chips 2878.43 Cum 2012.09 5791664.00

(iv) Local Sand 2354.43 Cum 310.46 730958.00

90 Difference cost of Materials 0.00

91 17.68 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets,40 mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required 0.00 0.00

17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. 22.00 Each 8889.71 195574.00

92 17.3 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 0.00 0.00

17.3.1 W.C pan with ISI marked white solid plastic seat and lid 12.00 Each 5504.30 66052.00

93 17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 0.00 0.00

a 17.7.4 White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap. 44.00 Each 2135.80 93975.00

b 17.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. 2.00 Each 3694.30 7389.00

94 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 14.00 Each 1500.00 21000.00

95 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: 0.00 0.00

17.10.1 Kitchen sink with drain board 0.00 0.00

96 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 34.00 Each 131.60 4474.00

97 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. 0.00 0.00

17.28.2 Flexible pipe 0.00 0.00

98 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 0.00 0.00

17.32.4 Rectangular shape 1500 x 450 mm 84.00 Each 1515.20 127277.00

99 17.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. 84.00 Each 713.30 59917.00

100 17.34 Providing and fixing toilet paper holder: 0.00 0.00

101 12.78. Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00

a 12.78.1 75 mm diameter 90.00 Metre 162.70 14643.00

102 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00

12.79.2.1 Single pushfit coupler 0.00 0.00

12.79.3 Single tee with door 0.00 0.00

12.79.4 Single tee without door 0.00 0.00

103 12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 0.00 0.00

104 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 0.00 0.00

17.70.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 260 gms. 48.00 Each 325.10 15605.00

105 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 83.00 Each 146.30 12143.00

106 17.73 Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 0.00 0.00

17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms. 35.00 Each 424.00 14840.00

107 18.22 Providing and fixing C.P. brass shower rose with 15 o r 20 m m in let : 0.00 0.00

108 8.10 Providin g and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fi xed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 ceme nt : 2 coarse sand : 4 graded stone finished smooth. aggregate 6 mm nominal size) as per direction of Engineer - in-Charge and 0.00 0.00

8.10.2 Granite Stone of approved shade 55.00 Sqm 3542.90 194860.00

Water Supply 0.00 0.00

109 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0.00 0.00

Internal work-Exposed on wall 0.00 0.00

a 18.7.1 15 mm dia nominal bore 350.00 Metre 172.00 60200.00

b 18.7.2 20 mm dia nominal bore 120.00 Metre 233.90 28068.00

c 18.7.3 25 mm dia nominal bore 210.00 Metre 317.30 66633.00

d 18.7.4 32 mm dia nominal bore 50.00 Metre 395.20 19760.00

e 18.7.5 40 mm dia nominal bore 225.00 Metre 538.40 121140.00

f 18.7.6 50 mm dia nominal bore 75.00 Metre 791.00 59325.00

110 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0.00 0.00

a 18.8.1 15 mm nominal outer dia Pipes 450.00 Metre 278.20 125190.00

b 18.8.2 20 mm nominal outer dia Pipes 325.00 Metre 350.80 114010.00

c 18.8.3 25 mm nominal outer dia Pipes 210.00 Metre 463.10 97251.00

d 18.8.4 32 mm nominal outer dia Pipes 190.00 Metre 549.80 104462.00

111 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 0.00 0.00

18.9.5 40 mm nominal outer dia Pipes 54.00 Metre 477.60 25790.00

112 18.16 Providing and fixing brass stop cock of approved quality. 0.00 0.00

a 18.16.1 15 mm nominal bore 34.00 Each 303.80 10329.00

b 18.16.2 20 mm nominal bore 44.00 Each 328.00 14432.00

113 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end). 0.00 0.00

a 18.17.1 25 mm nominal bore 18.00 Each 532.30 9581.00

b 18.17.3 40 mm nominal bore 20.00 Each 707.30 14146.00

c 18.17.4 50 mm nominal bore 16.00 Each 878.20 14051.00

114 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end). 0.00 0.00

18.19.3 40 mm nominal bore 0.00 0.00

115 18.33 Constructing masonry Chamber 60x60x75cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: 0.00 0.00

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 38.00 Each 7210.60 274003.00

116 18.49 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 0.00 0.00

15 mm nominal bore 80.00 Each 434.20 34736.00

117 18.50 Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 0.00 0.00

18.50.1 15mm nominal bore 43.00 Each 715.10 30749.00

118 18.51 Providing and fixing C.P. brass long body,bib cock of approved quality conforming to IS standards and weighing not less than 690 grams. 0.00 0.00

18.51.1 15 mm nominal bore 43.00 Each 708.40 30461.00

119 18.52 Providing and fixing C.P. stop cock (concealed) of standard design and of approved quality conforming to IS : 8931 0.00 0.00

18.52.1 15 mm nominal bore 100.00 Each 594.80 59480.00

120 18.53 Providing and fixing C.P. brass,angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 0.00 0.00

18.53.1 15 mm nominal bore 34.00 Each 500.40 17014.00

Sewerage & Drainage 0.00 0.00

121 19.6 Providing, laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement motor in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 0.00 0.00

19.6.2 150 mm diameter R.C.C. pipe 100.00 Metre 410.70 41070.00

122 19.7 Constructing brick masonry manhole with 75 designation brick in cement mortar 1:4(1 cement: 4 sand)R.C.C. top slab with 1:2:4 mix (1 cement:2 sand: graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 ( 1 cement: 4 sand: 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3(1 cement: 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregte 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. 0.00 0.00

19.7.1 Inside size 90 x 80 cm and 45 cm deep deep including C.I Cover with frame 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). 0.00 0.00

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 11.00 Each 7914.70 87062.00

123 19.8 Extra for depth for manholes 0.00 0.00

19.8.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 6.00 Metre 5660.00 33960.00

124 19.2 Supplying and fixing C.I cover 300x300mm without frame for gully trap (Standard pattern) the weight of cover to be not les than 4.5 kg. 11.00 Each 658.10 7239.00

125 19.27 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4( 1 cement: 4 coarse sand) including 500x450mm pre-cast R.C.C horizontal grating with frame complete as per standard design: 0.00 0.00

19.27.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 11.00 Each 3743.30 41176.00

126 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 0.00 0.00

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line: 0.00 0.00

19.30.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 11.00 Each 4266.80 46935.00

127 19.31 Extra for depth beyond 45cm of brick masonry chamber: 0.00 0.00

19.31.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 6.00 Metre 3946.20 23677.00

128 2.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: 0.00 0.00

2.10.1 All kinds of soil 0.00 0.00

2.10.1.3 Pipes, cables etc. exceeding 300mm dia but not exceeding 600mm 130.00 Metre 611.60 79508.00

129 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 30000.00 per litre 9.70 291000.00

130 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 Metre depth below ground level. 0.00 0.00

131 24.2 Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer - in-Charge, beyond 90 metre & upto 150 metre depth below ground level. 0.00 0.00

132 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 0.00 0.00

a 24.3.2 150 mm nominal size dia 140.00 metre 660.10 92414.00

b 24.3.1 100 mm nominal size dia 140.00 metre 546.10 76454.00

133 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 0.00 0.00

a 24.4.2 150 mm nominal size dia 100.00 metre 673.50 67350.00

b 24.4.1 100 mm nominal size dia 40.00 metre 573.10 22924.00

134 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 40.00 cum 1188.90 47556.00

135 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 24.00 cum 1195.60 28694.00

136 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 16.00 cum 1195.60 19130.00

137 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. 29.42 cum 1343.20 39522.00

138 24.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 12.00 each 1213.20 14558.00

139 24.12 Development of tube well in accordance with IS : 2800 (part I ) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory,i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 48.00 Hrs 916.80 44006.00

140 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0.00

141 24.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 0.00 0.00

142 24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 0.00 0.00

143 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 8.00 cum 47.90 383.00

144 18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work in 0.00 0.00

18.37.1 18.37.1 With common burnt clay F.P.S.(non modular) bricks of class 4.00 Nos 6849.90 27400.00

145 AR S/F/F 2 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job. 2.00 each 30090.00 60180.00

Total B = 3918498.00

FIRE FIGHTING+FURNITURE

146 27.7 Supply, Installation & Fixing of M.S Pipes (Class "C") Confirming to IS:1239. 0.00

147 27.9.1 Supply, Installation and fixing of Landing Valve SS /GM conforming to IS - 5290 with 63 mm dia instantaneous female coupling on the outlet with cap and chain, necessary companion flanges, nuts, bolts, washer and gasket complete. 10.00 Nos 7245.00 72450.00

148 27.16.1 Providing and fixing of 63 mm dia 15 m long rubberized fabric SS lined hose including male and female instantaneous type coupling. 10.00 Nos 5206.00 52060.00

149 27.17.2 Providing and fixing of First Aid fire hose reel wall mounting swinging type fitted with 20 mm dia 40 m long high pressure hose to I.S. 5132 with 5 mm outlet ss nozzle with shut off valve 10.00 Nos. 9616.00 96160.00

150 27.18.1 Providing and fixing of standard short size SS/GM Branch Pipe with nozzle 16 mm dia outlet with standard instantaneous type 63 mm dia coupling. 10.00 Nos. 2393.00 23930.00

151 27.14 Providing & fixing of cast iron dual plate wafer type Non Return valves including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges. ISI Marked. 0.00 0.00

152 27.11 Providing & fixing of C.I. Butter Fly Valves complete with bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges complete. ISI Marked. 0.00 0.00

153 4278 Supply, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, ISI Marked. 2.00 Set 9324.00 18648.00

154 27.15 Providing, istallation, testing & commissioning of Y Strainer with complete fitting accessories. 0.00 0.00

155 27.19.1 Supply, Fixing & Testing of Fire Brigade Inlet - 2 way. 2.00 Each 6331.00 12662.00

156 27.20 Supply & Fixing air vessel made of 250 mm dia, 8 mm thick MS Sheet, 1200 mm I height with air release valve on top and flanged connection to riser, with 25 mm dia valve with required accessories 2.00 Set 17707.00 35414.00

157 27.24 Providing, fixing, testing & commissioning of installation control valve of cast iron body with all required fitting accessories size. 0.00 0.00

158 27.4.2 Supply, fixing and installation of Electric Terrace Fire Pump 450 LPM, 35 M Head, 2900 RPM with Mechanical Seal & coupling with guard and avm pads. 2.00 Set 84198.00 168396.00

159 NS Providing of fire hose cabinet fabricated from M.S. sheet with single front door and locking arrangement. 8.00 Nos. 2100.00 16800.00

160 NSR As approved for 300 bedded hostel in Govt Polytechnic Muzaffarpur SITC of Pressure Gauge 2.00 Nos. 1722.00 3444.00

161 Providing and fixing of Brass Ball valve 25 mm (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg cm2 of approved. ISI Marked. 10.00 Nos. 1722.00 17220.00

162 NS Supply, fixing and installation of Electric Fire Pump Panel complete with all fitting materials. 2.00 Set 18500.00 37000.00

163 7.7 Supplying of PVC insulated sheathed armoured electric cable with aluminium conductor of 1.1 kv graded as required size. 0.00 0.00

(a) 7.7.6 Power cable 4 core x 16 mm2 175.00 Mtr. 299.00 52325.00

(b) 7.7.1 Control cable Cu armoured, 2 core x 6 mm2 125.00 Mtr. 159.00 19875.00

164 NS Supply, installation, testing and commissioning of pipe support from column/wall or suspenders to suit various dia of pipes, elbow, angle made out of MS/GI as required size. 2.00 Set 22590.00 45180.00

FIRE ALARM SYSTEMS 0.00 0.00

165 NS Supply, Installation & Fixing of Conventional Fire Alarm Panel 2 Zone; 4.00 No. 9500.00 38000.00

166 NS Supply & Installation of Smoke Detector, 40.00 Nos. 1320.00 52800.00

167 NS Supply & Installation of MCP. 10.00 Nos. 490.00 4900.00

168 NS Supply & Installation of Hooter. 10.00 Nos. 450.00 4500.00

169 NS Supply of 2 C X 1.5 sq.mm copper wire. 10.00 Coil 5300.00 53000.00

FIRE EXTINGUISHERS 0.00 0.00

170 NS ABC Powder type store pressure Fire Extinguishers 6 kg capacity IS:15683 20.00 Each 2295.00 45900.00

171 NS Co2 type Fire Extinguishers 4.5 Kg capacity with IS:15683 10.00 Each 5595.00 55950.00

172 M/R Visitor Chair Size (W)490mm X (D)470mm X (H)680mm). Multipurpose fixed cantiliver chair & armrest with pading & metal base. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 32.00 EACH 7820.00 250240.00

173 M/R Library Table-Library Table Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 8.00 EACH 30654.00 245232.00

174 M/R 2 Door Book Case- 2 Door File Cabinet - Size (800x381x1970)mm. 2 Door file cabinet. On the top shelf for display with two glass door. With ample storage facility. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology Color-Wenge. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 8.00 EACH 28224.00 225792.00

175 M/R 4 DOOR GLASS BOKK CASE :(L)838MM X (D)305MM X (H)1676MM * BOOKCASE 4 DOORS WITH CAM * BODY: 22 GAUGE * DOORS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 8.00 EACH 23696.00 189568.00

176 M/R Single Metal Bed ( Without Mattress) with 8 mm Ply on mattress area- Bed Size (in MM): 1981 x 977* MATERIAL: Metal. Bed frame made upof mild steel heavy duty. The frame joints are all mig welded and grounded for better finish . The frame to be powder coated. The product should be Certified Company BIFMA, ISO -50001, Green Guard/Green PRO, Sedex, AIOTA,IGBC,AGSI,FSC & PERC. 210.00 EACH 15660.00 3288600.00

177 M/R Study Table - TABLE TOP IN 18MM THICK PRELAMINATED BOARD WITH UNDERSTRACTURE MADE OF POWDER COATED SINGLE UNIT WITH METAL MESH SHELF FOR BOOKS TABLE SIZE: 700MML X 450MMD X 740MMH. * SCRATCHPROOF EASY WIPE TOP * METAL SHELF & WIRE SHELF WITH BAG HOOK * DURABLE ,STRONG & SAFE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 210.00 EACH 6125.00 1286250.00

178 M/R Study Chair - CHAIR SIZE: 355MML X 381MMD X 780MMH. FIBER SEAT* SCRATCHPROOF EASY WIPE TOP SUPPORTED WITH UNDERSTRACTURE MADE OF POWDER COATED. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 210.00 EACH 5370.00 1127700.00

179 M/R STEEL ALMIRAH WITH 4 SHELVES (L)900MM X (D)450MM X (H)1980MM. STOREWELL WITH 4 SHELVES GAUGE: BODY: 22 GAUGE *DOORS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 16.00 EACH 18424.00 294784.00

180 M/R Mattress 2" thick (Size75"x36") Supplying and fixing of Mattress (Size75"x36"x2) at site. The Product should be green guard. The Product should be PEFC,FSC, BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. 210.00 EACH 4704.00 987840.00

181 M/R Dining table-Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product should be green guard. The Product should be PEFC,FSC, BIFMA, Green Gaurd,AGSI & ISO.14001,18001 Certified 15.00 EACH 22344.00 335160.00

182 M/R Stackable Café Chair : Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/ Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 150.00 EACH 4704.00 705600.00

183 M/R Office Table with Side Unit- Table Top Size-( 1800L x 900D x 760H)mm with 25-30 MM table top thk & Side runner size- (900L x 400D x 760H) with 25 MM thk. Straight line table with two wire manager,Mobile pedestal with 3 drawer/center lock,interchangeble side runner with 3 drawer with lock.one open shelf,one closed shutter with lock,key board trey & CPU trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge. The Product should be BIFMA, Green Guard, AGSI Certified, ISO 14001, ISO 50001:2011 Certified. 4.00 EACH 48804.00 195216.00

184 M/R High Back Chair with revolving. Size(Seat-510x480, Back-660x510, Height-Min.470mm Max.540mm) Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 4.00 EACH 15680.00 62720.00

185 M/R Table with side unit return- Table Size(1500x750x 750) mm with 25 mm thk top & Side runner Size(750x450x 750)mm with 25 mm thk. Table made of 25 mm thk pre lam particle board with edge banding. Table top supported with 25 mm side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 4.00 EACH 36064.00 144256.00

186 M/R High Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min-Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-Black 4.00 EACH 14602.00 58408.00

Total C Rs. 10,999,731.00

Total A+B+C Rs. 139,444,115.00

Total Amount of SOR & DSR items for all works Rs. 129,611,875.00

Total Amount of non schedule items Rs. 9,832,240.00

Applying Correction Factor @ 0.982 on Scheduled Items for all works Rs. 127,278,861.00

Add Extra G.S.T @ 5.36% Rs. 6,822,147.00

Total Amount Rs. 143,933,248.00

ELECTRICAL WORK

187 1.3 Wiring for light point/ fan point/ exhaust fan point/ Call bell Point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular Plate, suitable size G.I box etc. as required.

188 1.31 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 80.00 Each 414 33120

189 1.55 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 2 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as reqd. 238.00 Each 632 150416

190 1.32 Supplying and fixing suitable size of G.I. box with modular plate and cover in front or in surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 59.00 Each 531 31329

191 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 885.00 Meter. 309 273465

192 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(For ckt.) 2090.00 Meter 201 420090

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(For 2 nos. 5 amp socket on wall & Flood light) 3870.00 Meter 246 952020

1.7.2 2 X 2.5 sq mm + 1 X 2.5 sq mm (For COM.) 45.00 per mtr 246 11070

1.7.3 2 X 4 sq mm + 1 X 4 sq mm (for AC.) 90.00 per mtr 309 27810

193 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required

1.15.1 1x1.5 sq.mm (for inverter) 1800.00 p.mtr 38 68400

194 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar, inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.9.1 4 ways (4+12), Double door, horizontal type 40.00 Each 4184 167360

2.9.2 6 way (4+18) double door, horizontal type 2.00 each 5132 10264

195 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole 516.00 Each 237 122292

196 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs)

2.33.4 12 way, Double door, I/C 160A, MCCB 4.00 each 20409 81636

197 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing panel board including drilling holes in cubicle panel, making connections etc. as required.

2.4.1 100 A, 30 KA, FPMCCB ( As Outgoing for Lift) 1.00 Each 8172 8172

198 2.7 Providing and fixing following capacity 4 pole ON-load panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

199 2.12 S/F following rating, 240/415 volts, 'C' curve circuit breaket suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as reqd.

200 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 36.00 Sq. ft. 1809 65124

201 A/R Supplying of copper strip of all sizes for busbar strip/interconnection including drilling holes etc as reqd. 24.00 Kg 871 20904

202 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1.00 Each 6536 6536

203 7.7 Supply of following sizes and core PVC / XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

204 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

7.1.4 Above 185 sq. mm and upto 400 sq. mm 250.00 Meter 368 92000

205 1.33 Supplying and fixing 2 pin, 5/6 amp. ceiling rose on the existing junction box/ wooden block including connection etc as required. 473.00 Each 64 30272

206 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 127.00 Each 80 10160

207 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp 127.00 Each 250 31750

208 1.38 Supplying and fixing electronic musical call bell suitable for single phase, 230 volts complete as required. 1.00 Each 351 351

209 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone Socket outlet 3.00 Each 131 393

1.24.7 TV antenna socket outlet 2.00 Each 131 262

210 1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 module (75 mm x 75mm ) ( For TV point, Telephone point) 5.00 Each 234 1170

211 1.21. Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

1.21.1 20 mm dia ( For TV & Telephone point) 100.00 Meter 102 10200

1.21.2 25 mm dia ( For TV & Telephone point) 60.00 Meter 120 7200

212 1.16. Supplying and Drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

213 1.17. Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shield with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required. 60.00 Meter 42 2520

214 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 216.00 Each 521 112536

215 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

216 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 40.00 each 2663 106520

217 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

5.14.2 45 watt (On Terrace) 1.00 Each 3382 3382

218 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 21.00 Each 1038 21798

219 1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 100.00 Each 34 3400

220 1.25 Supplying and fixing two module stepped type electronic Fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 160.00 Each 358 57280

221 DSR-9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.

DSR-9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 160.00 Each 2695 431200

222 1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 module (75 mm x 75mm ) ( For fan regulator) 160.00 Each 234 37440

223 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

224 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 7.00 Set 6884 48188

225 3.16 Providing & fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 140.00 Meter 53 7420

226 3.12 Supplying and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connecion with G.I. thimble excavation and refilling etc. as required. 100.00 Each 278 27800

LIGHTING ARRESTER

227 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 8.00 Each 416 3328

228 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 16.00 Each 81 1296

229 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 260.00 Meter 102 26520

230 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 60.00 Meter 145 8700

231 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 6.00 Each 102 612

232 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 4.00 Set 6323 25292

233 3.11 Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. 40.00 Meter 721 28840

NETWORKING /WIFI ACCESS POINT

234 1.58.1 SITC Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recesssed steel/PVC conduit at required. 4400.00 metre 52 228800

235 DSR39.12.1 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.Copper Patch Cords of length 1m (3ft) 180.00 each 151 27180

236 DSR39.12.2 Copper Patch Cords of length 3m (10ft) 180.00 each 227 40860

237 SITC 24 -port GbE Smart Managed Switch with GbE Uplink interfaces 24 Ports 10/100 /1000Mbps +4 SFP port Standard & Functions - IEEE 802.3 10 BASE -T Ethernet (twisted-pair copper) , IEEE 802.3u 100BASE- TX Fast Ethernet (twised-pair copper) , IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper ), IEEE 802.3az compliance Auto negotiation , IEEE 802.3x Flow Control ; Full Half Duplex for 10/100 Mbps speed, Full duplex for Gigabit Speed ; Media interface Exchange Auto MD/ MDIX adjustment for all twished -pair port; Switching Capacity 56 Gbps; Transmission Method Store -and-forward,; MAC Address Table 16,000 entries per device , Maximum 64 bytes packet forwarding rate 41.7 Mpps, Packet Buffer Memory 1.5 MB, Maximum power Consumpltion 22.45 watts, Standby power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr Certifications CE (LVD) 10.00 each 29500 295000

238 DSR39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 10.00 each 5278 52780

239 DSR39.23.3 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.15U Rack 6.00 each 13330 79980

240 SITC Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required. 180.00 each 545 98100

241 SITC Wireless N Access Point Interface - One 10/100 Mbps RJ45 Port (Auto MD/MDIX), Button - WPS Button, Reset Button, External Power Supply - 9VDC /0.6A Antenna Type - 5dBi Detachable Omni Directional Antenna, Frequency - 2.4-2.4835 GHz, Wireles Standards - IEEE 802.11n, IEEE 802.11g IEEE 802.11b, Wireless Security - SSID Enable /Disable MAC Address Filter 64/128/152-bit WEP Encryption WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption Wireless Modes- AP Mode, Multi-SSID Mode, Client Mode, Repeater Mode (WDS/Universal), Bridge Mode, TPlink/Cisco/ Netgear 16.00 each 12500 200000

FOR SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM

242 DSR Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mana/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/Gl structure of suitable strength with following components complete as required:a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection.f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 30kw Kwp 54280 1628400

243 21.1 (DSR) Supplying, Installation, Testing & Commissioning of following capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:- (i) Speed-1 MPS (ii) Floors-4 (G+3) (iii) Travel -17 Meters (approx.) (iv) Stops & opening- 5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires

system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii)Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the

entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided (with 3 Year Free Maintanance in DLP Period) MAKE-(OTIS, KONE, MITSUBISHI, JOHNSON, SCHINDLER)

244 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Batten Holder 2.00

T/L light point 2.00

Bulk-Head point 8.00

Exhaust fan point 2.00

245 1.31.1 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 10.00 each 414 4140

246 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 4.00 each 531 2124

247 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 60.00 mtr 309 18540

248 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 37.00 mtr 201 7437

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 82.00 mtr 660 54120

249 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 2.00 Each 4184 8368

250 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0

2.12.1 6 A to 32 A, Single pole 24.00 Each 237 5688

251 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 4.00 Each 64 256

252 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 2.00 Each 80 160

253 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0

6.1.5 12 watt LED lamp 2.00 Each 239 478

254 5.3 Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. (For Non-residential building) 2.00 Each 762 1524

255 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0

256 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 8.00 Each 1275 10200

257 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 4.00 Each 13721 54884

258 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 128.00 Mtr 144 18432

TOTAL ELECTRICAL 13848335.00

TOTAL (CIVIL+ELECTRICAL) = 157781583.00

EXECUTIVE ENGINEER

BUILDING DIVISION, MUZAFFARPUR

50% QUANTITY OF DIFFERENT OF WORK AND AMOUNT OF ELECTRICAL & WATER SUPPLY WORK

SL.NO. ITEM OF WORK QUANTITY/AMOUNT UNIT

1 EARTH WORK (FILLING) 2013.370 M3

2 BRICK WORK 738.835 M3

3 PCC+RCC WORK 1669.575 M3

4 FLOORING (Kota Stone, Ceramic Tiles, Vitrified Floor Tiles etc) 2378.970 M2

5 WATER SUPPLY WORK & SANITATION 2303622.000 RUPEES

6 FIRE FIGHTING 801183.000 RUPEES

7 FURNITURE 4698683.000 RUPEES

8 ELECTRICAL WORK 6924168.000 RUPEES

Executive Engineer,

Building Division Muzaffarpur