COMPREHENSIVE MAINTENANCE OF B/R AND E/M WORKS AT CERTAIN MARRIED ACCOMMODATION AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Notes:- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. 5. Contractor should maintain separate registers for plumbing and carpenter repair works. Day to day complains should be noted in those registers with SI nos of complaints, location, qty of work, status of complaints and signature of incharge and stamp of the office. Format will be given from AGE B/R Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE (Civ) on every weekend without fail. 6. List of complaints will be given to contractor on the first week of every month. Contractor should ensure all the works will be completed within that month itself. 7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25% of corresponding item will be made from contractor. 8. Contractor will make his own arrangement to store his items. 9. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 10. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 11. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.

Dismantling of existing PVC 500-1000 ltrs water tank complete all as directed.

S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed.

S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete, as specified and directed

M&L Soft closer drawer channel of any length as per requirement as directed. Make : Godrej

M&L Stainless steel Basket any type / any size fixing as directed by Engr-in-charge.

S&F Stainless steel Handle 100mm dia as directed.

S&F Clip on soft hinges full overlay as directed. Make : Godrej

Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard complete all as specified and as directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar all as specified and directed.

M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone in jambs, window-cills, cooking platforms including grinding and polishing complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-In-Charge

M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed.

M&L Double charged/Glazed Vitrified Ceramic tiles of dark/light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L Double charged/Glazed Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L Non skid ceramic tiles (Rectified tiles) of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry, pointed with white/colour cement to match colour of tiles all as specified and directed.

M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling as directed by Engineer In charge.

M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed.

Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

Removing excavated material exc 250m but n.exc 500m and depositing where directed

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises.

M&L Glazed Ceramic tiles coloured, of size 600mmX350mm/300mmX(7-9)mm thick approved 1st quality as in vertical surfaces along with rendering to Stone/Brick masonry surfaces 10mm thick in cement mortar 1:4, such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

M&L Glazed Ceramic tiles coloured, of size 450mmX350mm/300mmX7mm thick approved 1st quality as in vertical surfaces along with rendering to Stone/Brick masonry surfaces 10mm thick in cement mortar 1:4, such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

S&F in repairs 25 mm dia Stainless steel curtain rods with fixing brackets, stops, rollers etc, taking down old pipe complete all directed by the Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

Taking down Shutters of any description exc 1.0 Sqm and not exc 2 sqm each complete all as specified and directed

Taking down, Resecuring or easing and refixing shutters of any description exc 1 sqm and n exc 2 Sqm with new builders hardware articles wherever necessary each complete all as specified and directed by Engineer-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door/ Skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as directed by the Engineer-in-Charge.

S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S&F factory made uPVC white colour Fixed glazed window/ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as directed by Engr-in-charge.

Supply and fix Powder coated Aluminium window shutters, sliding type Three track with frame for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : Glass and wiremesh will be measured and paid separately under relevant item.complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm fixed with stainless steel wire staples as directed by the Engineer-in-Charge.

S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty exc 0.5sqm in each pane complete all as specified and directed.

S&F MS powder coated framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m all as specified and directed.

M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on ceilings complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

M&L Complete removal of existing treatment on walls complete all as directed.

M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement or cement lime mortar as in directed.

M&L Finishing walls on Stone/Brick masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L Complete removal of existing treatment on ceilings complete all as directed.

M&L 3 coats of white wash over a coat of primer on old plastered surfaces on ceilings complete all as specified and as directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

All same as per item No.70 here in before but 20 mm bore.

All same as per item No.70 here in before but 25 mm bore.

S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs inc concealed piping after cutting in brick work/stone masonry walls where ever required complete all as specified and directed.

All as per item No.73 above but 20mm bore.

All as per item No.73 above but 25mm bore.

S&F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings all as specified and directed.

S&F CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete as directed by the Engr-in-charge.

Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

S&F Table top wash hand basin whiteflat back, size 510mmX410mmX150mm including couplings, waste pipe, connections and all necessary fittings complete all as specified and as directed. Make: Prayag Catpart No-4715 or quivalent in other make.

S&F 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make: Prayag Catpart No-6314N or quivalent in other make.

S&F 32mm CP Bottle traps for washbasin outlet Make: Prayag or equivalent in other make complete all as specified and as directed by the Engineer-in-Charge.

S&F Vitreous China wash hand basin whiteflat back, along with Pedestal size 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed.

S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make : Prayag Catpart No - 7314 or equivalent in other make.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat and cover for pedestal pan as in repairs complete all as specified and directed.

S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

Supply and fix in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and directed.

S&F in repairs brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent

S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed.Make : Prayag/Parryware or equivalent

S&F in repairs brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as directed.Make: Prayag Catpart No-6675 or quivalent in other make.

S&F in repairs brass CP shower rose with arms 75 mm size fixed all as specified and directed.

S&F 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. Make: Prayag/Parryware or equivalent.

S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make: Prayag/Parryware or equivalent.

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

S&F in repairs Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

S&F in repairs Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repairs Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed

S&F in repairs Towel ring for WHB consisting chromium plated complete all as specified and directed

S&F in repairs Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in all as specified and directed.

S&F in repairs Soap dish any type fixed to plugs with chromium plated complete all as directed

S&F in repairs Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and directed.

S&F SS Grating round 140 mm dia (Minimum weight 50gms) and fixed in repairs all as specified and directed.

S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed.

S&F in repairs PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

S&F in repairs PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR Item No. 2,3,4 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. In case the flush box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

One light / fan point controlled by two, two way switch

All as per item No. 114 here-in-before but with 4 sq mm size FRLSH pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for earth plug socket

All as per item No. 114 here-in-before but with 2.5 sq mm size FRLSH pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC conduit of dia 20mm minimum/ casing capping , 1.2 mm thick minimum, 20mm width minimum with double locking arrangement, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR Item No.5,6,7:- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth and core cutting wherever required & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) The decision of casing capping/PVC conduit rests with the Engineer-in-charge.For casing capping, screws of minimum 35x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20mm. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

One light / fan point controlled by two, two way switch

All as per item No. 117 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

All as per item No. 117 here-in-before but with 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 15A Switch socket/Earth plug socket for ACs and geysers

M&L for point wiring with 1.5 sq.mm FRLSH insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable as per proper colour coding conforming to relevant IS drawn through existing concealed PVC conduit including FRLSH, PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and modular boxes of 16 Gauge (i.e. 1.6mm thickness), etc including all accesories if required making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.

One light point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item No. 120 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F in replacement modular metal flush box 1/2 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F in replacement modular metal flush box 3 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F in replacement modular metal flush box 4 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F in replacement modular metal flush box 6 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F in replacement modular metal flush box 8 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F in replacement modular metal flush box 12 module including any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

S&F in replacement of modular cover plate white with frame complete for 2 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of modular cover plate white with frame complete for 3 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of modular cover plate white with frame complete for 4 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of modular cover plate white with frame complete for 6 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of modular cover plate white with frame complete for 8 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of modular cover plate white with frame complete for 12 module complete all as specified and directed by Engr-in-charge.

S&F Modular Polycarbonate 1M Usb Charger 1000 Ma 5V Dc With Cable, operating voltage 240V AC complete all as specified and directed by the Engineer-in-charge

S&F in replacement ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F in replacement modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F in replacement modular switch 6 Amp, two way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F in replacement modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F in replacement modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F in replacement modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F in replacement modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F in replacement modular fan regulator 100 W 2 module complete all as specified and directed by Accepting officer

S&F in replacement call bell, ding dong AC 230 Volt single pole complete as specified.

S&F in replacement earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 complete all as specified and directed. Make: Wipro garnet /Havells Endura Linear Neo or similar.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells Endura Linear Neo/Bajaj Dawn or similar.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable with globe shape B22 LED lamp fitting 12 Watt including the lamp complete all as specified and directed by Engr-in-charge

S&F in replacement electric water heater, vertical storage type with ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe) etc including taking down the existing unserviceable geyser and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge. Model: Havells Monza GHWAMOSWH025 or Crompton Arno Neo ASWH-3025 or similar

S&F in replacement stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in replacement bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and directed by Engr-in-charge.

S&F in replacement of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778 including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and deposit to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete after cleaning externally complete all as specified and as directed.

Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

S&F in replacement sheet metal enclosure powder coated for VTPN DB 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

S&F in replacement sheet metal enclosure powder coated for MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

S&F in replacement sheet metal enclosure powder coated for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by Engr-in-charge.

S&F in replacement MCCB , 415V, 125 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F in replacement MCB TPN, 40-100 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F in replacement MCB single pole to neutral, 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F in replacement MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M&L in replacement Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L in replacement for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 10 Sqmm drawn through PVC conduit/casing capping including accessaries with 10 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessories with 4 sqmm PVC insulated earth wire all as directed. Note: 2 runs of 4 sqmm copper cable and one run of 4 sqmm copper earth wire and conduit/Casing & Caping will be measured as one length. The wiring shall be concealed/on surface is under the discretion of Engineer-in-charge. The rate quoted shall include cost of cutting chases and core cutting wherever required.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessories with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of 6 sqmm copper cable and one run of 6 sqmm copper earth wire and conduit/Casing & Caping will be measured as one length.

M&L in replacement for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge

S&F in replacement Exhaust fan, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge

Disconnecting and removing exhaust fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

M&L for cutting round holes suitable for fixing of exhaust fan/chimney pipe of size 150-300 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

S&F in replacement wall lamp, plastic body, decorative type, suitable for indoor/outdoor usage, flush mount complete all as specified and directed by Engineer-in-charge. Model No. Crompton WALLGLOW-O-E27/ Havells Floretine WL 1LS B22 SS/similar

Supply, lay, testing and commissioning in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 3.5 core complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations / taking out / in cables / pipes etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

Supply and spread clean Riddled soil in trenches for cushioning of cable complete all as specified and directed by Engineer-in-Charge. (Punned down thickness only shall be measured for the purpose of payment) Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning.

Supply and fix precast concrete cable covers class LV type 1, flat size 250 x 150 x 40 mm M-20 grade concrete laid dry for cable protection complete all as specified and directed.

S&F in replacement of electric chimney capacity of Air flow of 1500 Cum / hr of size of 90 cm specifications of heat auto clean with motion sensor, Auto off function, touch sensor control, brushless DC motor 9 speed control, oil collector tray, electric lights LED, filter less chimney including aluminium pipe from chimney to exhaust hole complete all as specified and directed. Model No. Elica WDFL 900 BLDC HAC LTW MS NERO or Hindware C100371 or similar

S&F in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection with suitable pipe for fitting to surface ,no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge Model No.Havells ENDURASUNDOWNSL35WLED765PASYBOPC or Philips BRP331 LED42 CW R5N PC PSU S1 or similar

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories without remote, 230 V, 1200mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) including fixing of anchor bolt /fastening arrangement for fan hook complete all as specified and directed by Engineer-in-Charge. (as per latest authorization)