SPL REPAIR TO BLDG NO T-22 OF RPA AND BLDG NO T-302 AND T-303 AT HQ CC IN SUKNA UNDER AGE B/R-II AGE B/R-I AND AGE E/M OF GE SUKNA AT MIL STN SUKNA

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GARRISON ENGINEER SUKNA

Name of Work : SPL REPAIR TO BLDG NO T-22 OF RPA AND BLDG NO T-302 & T-303 AT HQ CC IN SUKNA UNDER AGE B/R-II, AGE B/R-I & AGE E/M OF GE SUKNA AT MIL STN SUKNA

Contract No: GE/SUK/ OF 2025-26

Excavation over areas not exceeding 1.5 M deep and getting out in Soft/ Loose Soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Excavation over areas for each additional 1.5 m or part thereof in depth beyond the first 1.5m complete all as specified and directed. Cum Excess(+) Full Conversion INR

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and not exceeding 1.5 m in depth getting out in soft / loose soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed. Cum Excess(+) Full Conversion INR

Removing excavated material exc. 250 m but n exc. 500 m and depositing where complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells using broken bricks complete all as specified and directed. Cum Excess(+) Full Conversion INR

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains, hardstanding including necessary form work complete all as specified and directed. Cum Excess(+) Full Conversion INR

M & L for plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in roof kerbs, rounded or chamfered on haunching in chajjas to prevent water seepage into brick walls, including necessory formwork rounded or chamfered on edges complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L Precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. complete all as specified and as directed. Cum Excess(+) Full Conversion INR

M & L for providing Reinforced cement concrete (1:2:4) type B-1 Nominal Mix using 20 mm graded stone aggregate as in slab supported on walls ,beams and coloumns in floors,roofs,landings, kitchen slabs etc complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately.) Cum Excess(+) Full Conversion INR

M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in chajja, fascias etc supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately.) Cum Excess(+) Full Conversion INR

M & L for providing Reinforced cement concrete (1:2:4) type B-1 Nominal Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately.) Cum Excess(+) Full Conversion INR

Supply only integral water proofing compound complete all as specified. Kg Excess(+) Full Conversion INR

Supply only liquid water proofing compound complete all as specified. Ltr Excess(+) Full Conversion INR

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. Cum Excess(+) Full Conversion INR

M & L for brick work except bricks old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. Note : Old bricks obtained from dismantling shall be reused. Cum Excess(+) Full Conversion INR

M&L for Brunt Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:6 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick but except bricks complete all as specified and directed. Note:- Serviceable quantity of bricks obtained from demolition shall be reused. Sqm Excess(+) Full Conversion INR

M & L for brick work with sub class ‘B’ old size bricks in one brick thick honey-comb wall built in cement mortar 1:6 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed . RM Excess(+) Full Conversion INR

M&L 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 18 to 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rough finished flat formwork to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc. 200 mm thick (horizontal or sloping) work as rough finished surfaces of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rough finished flat form work to chullah hoods, trough, chajjas, and similar work as rough finished surfaces of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq. cm and not exceeding 13 Sq. Cm complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for 18 mm thick both side laminated MDF board interior grade and fixing with screwes to timber/steel frame work complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. Each Excess(+) Full Conversion INR

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. Rm Excess(+) Full Conversion INR

S&F 5 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for 5 mm thick solid plain PVC sheet (min density 600 Kg/Cum) wall panelling, panels stuck on & including framework made out of 5 mm thick & 50 mm wide PVC strips (min density 600 Kg/Cum) fixed to wall vertically at 250 mm centre to centre & horizontally at 600mm centre to centre. PVC strips shall have 6 mm wide and 1 mm deep grooves in their centre for sinking the head of the screw & shall be fixed to wall using 65 mm long MS screws & PVC fasteners at a max distance of 200 mm centre to centre. PVC sheet panel shall be fixed to PVC strip framework using solvent cement & jointing of two PVC sheet panel shall only be done above PVC strip. Minimum size of one PVC sheet panel shall be 1220 (L) x 2440 (H) mm, however in case of complete height of wall panelling is more than 2440 mm, PVC sheet panel of length 1220 mm and balance height shall be fixed above lower panels complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F 200 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 125mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 250 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 100 mm butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and directed. RM Excess(+) Full Conversion INR

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs mortice locks suitable for aluminium door of 100 mm size 4 lever aluminium body vertical type as per existing or sample complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F Ball catches with 8 mm dia., steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width of and of weight between 61 to 80 Kg. (extruded section) complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples including wooden beads complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Supply and fix in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F Decorative curtain rod of wooden finish powder coated of 25mm dia including six nos curtain ring per running metre complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F Decorative type wooden finish double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod fixing with screws complete all as specified and directed. Pair Excess(+) Full Conversion INR

S & F Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work confirming to Fe-290 Gde E-165 Complete all as specified and as directed by Engr-in-Charge. Kg. Excess(+) Full Conversion INR

S & F of mild steel screw bolts (machine made) diameter of neck 16 to 20 mm with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, exc. 22.5 cm and not exc. 30 cm long complete all as specified and directed. kg Excess(+) Full Conversion INR

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. Kg. Excess(+) Full Conversion INR

M&L for Mild TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. Kg. Excess(+) Full Conversion INR

M&L for Mild steel TMT bars 5 mm to 10 mm dia.,cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. Kg. Excess(+) Full Conversion INR

S&F rolled mild steel in plates, gusset plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-B complete all as specified and directed. Kg. Excess(+) Full Conversion INR

S & F Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. - Fe 410 -W (Gde-E-250) quality-A complete all as specified and directed. KG Excess(+) Full Conversion INR

S & F of structural steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 including fabrication complete all as specified and directed. KG Excess(+) Full Conversion INR

Erection only mild steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 including fabrication complete all as specified and directed. KG Excess(+) Full Conversion INR

S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F 150 mm floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. EACH Excess(+) Full Conversion INR

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Kg Excess(+) Full Conversion INR

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Kg Excess(+) Full Conversion INR

S&F powder coated aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F for Aluminium powder coated door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Fixing only pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws (Except sheeting) complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F in replacements for 4 mm thick E-board (designer pattern) celing of size 60x60 cm, fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including Anodised aluminium snap grid frame work for false ceiling confirming IS : 733, 737 & IS : 1285 : Hangers 6 mm dia., G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5mm dia., 40mm long complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white laminated fixed with screw to timber / aluminium frame work complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F Prelaminated particle board 9 mm, interior grade, prelaminated both side with one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber/aluminium frame work with suitable beading/snap grid complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as plinth protection Construction joints to be given at every 3M interval and Corners of buildings and filled with bituminous mastic or equivalent filler complete all as specified and directed. SQM Excess(+) Full Conversion INR

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base of floor, etc complete all as specified and directed. SQM Excess(+) Full Conversion INR

M&L for 25 mm thick PCC 1:2:4 type B0 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and fair to receive floor finishes complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. RM Excess(+) Full Conversion INR

M&L 10 mm thick premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 10 mm thick premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing in CM 1:3 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L Coloured glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing with cm 1:3 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc.0.06 sqm but n. Exc. 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 finish even and rough complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm in cement mortar 1:4 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra Sand complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement using WPC compound complete all as specified and directed. Note:- WPC shall be measured and paid separatley. Sqm Excess(+) Full Conversion INR

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of alkali resistant primer over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F 5.50 mm thick plain sheet glass ordinary quality fixed with aluminium frame work exc 0.50 sqm in each pane complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L preparation of new steel surfaces of any description, not otherwise described n.exc 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. X RM Excess(+) Full Conversion INR

M&L preparation of New steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, & side not less than 225mm with ABS chromium plate bracket guard complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor and including taking down of existing pipe complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor and including taking down of existing pipe complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F 25 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor taking down of existing pipe complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair 15 mm bore bib tap chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs 15 mm bore bib tap, two way, fancy type chromium plated, cast copper alloy, with crutch or butterfly handle and wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs pillar tap 15 mm bore,fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair 15mm bore stop valve, cast copper alloy, concealed type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 15 mm bore Angle stop valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in replacement 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs 25 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repair PVC connections 15 mm size with PTMT nuts, of length 600 mm & suitable for hot water supply complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs CP Towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repair stainless steel towel rail 600 mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. RM Excess(+) Full Conversion INR

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. RM Excess(+) Full Conversion INR

S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. RM Excess(+) Full Conversion INR

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. RM Excess(+) Full Conversion INR

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 75 mm bore PVC (SWR) junction single, (single T) equal or unequal, fixed with cement solvent, with oval access door complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal, fixed with cement solvent, with oval access door complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repairs 75 mm bore PVC (SWR) junction single, (single T) equal or unequal, complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repairs 110 mm bore PVC (SWR) junction single, (single T) equal or unequal, complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repairs of 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement including top cover grating complete all as specified and directed. Each Excess(+) Full Conversion INR

M & L for PCC 1:3:6 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore pipe complete all as specified and directed. RM Excess(+) Full Conversion INR

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed in CM 1:1 complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F in repairs Soap dish with metal dish chromium plated fixed to plugs complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and including connection to trap and to flushing pipe including provn of line concrete holding CI anti -syphonage pipe complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Each Excess(+) Full Conversion INR

Supply and fix, as in repair, vitreous china wash basin, of size 40D x 49W x 15H Centimeter Table Top Wash Basin for Bathroom Made of Ceramic Star White Rectangular Shape Over the Counter Basin complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F vitreous china One-piece Aspiro Floor Mount Western Commode for Bathroom | Soft Close Feature | Made of Ceramic | Star White Finish | Oval Shape Western Toilet | Floor Mount EWC and connection for drain etc complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F Urinal (back inlet with fixing accessories size 340x325x650mm , cat No URS - WHT – 13263 complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F CP sensor flushing valve for urinal with complete kit (battery operated ) Make Jaguar Cat Part No SNR 51097 complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on AC building board or commercial plywood and fixed to wooden plugs/PVC rawel plug with chromium plated brass screw and cup washer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs/PVC rawel plug with chromium plated brass screw and cup washer complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repair brass chromium plated toilet paper holder fixed to walls with chromium plated brass screws complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F Center hole basin mixer single leaver without pop-up waste system suitable for table top wash basin etc complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F Rimless Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 380x670x765 mm, S Trap- 300 mm complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F Table Top Basin, Fixing Accessories And Accessories Set, Size: 700 x 435 x 135mm complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge. Each Excess(+) Full Conversion INR

M&L POP ceiling corner fiber reinforced of 100 to 150mm wide leg for junction of wall and ceiling including necessary fixing arrangement complete all as specified and directed. RM Excess(+) Full Conversion INR

M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh including sunk or raised moulding Gl frame work suitable for hanging of 10 to 12mm thick gypsum board and fixing all as directed, making decorative type design in ceiling with POP, preparation of surface and applying two coat of plastic emulsion paint over a coat of primer over one coat of wall care putty (1mm thick) complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. Cum Excess(+) Full Conversion INR

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed. Cum Excess(+) Full Conversion INR

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. Cum Excess(+) Full Conversion INR

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position in framed work complete all as specified and directed. Cum Excess(+) Full Conversion INR

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. KG Excess(+) Full Conversion INR

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. Per Point Excess(+) Full Conversion INR

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, modular plate and frame on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch, all necessary cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Note :- (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Cutting chases shall be included in the unit rate. Per point Excess(+) Full Conversion INR

All as per Sl. item No. 162.00 above but for point wiring modular plate one 5 / 6 Amps socket outlet point on independent board. per point Excess(+) Full Conversion INR

All as per item No. 162.00 here-in-before but one 3 pin socket outlet / 15 amps on the independent board with other switches, with cables 2.5 sqmm size complete all as specified and directed per point Excess(+) Full Conversion INR

All as per Sl. item No. 162.00 above but for point wiring modular plate one 5 / 6 Amps socket outlet point on same board. per point Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 4.00 sqmm main wire along with 1 run of 4.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 6.00 sqmm main wire along with 1 run of 6.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

S&F switch piano modular type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch piano modular type one way, 15 /16 Amps independent, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F socket outlet modular type 3 pin 5 / 6 Amps, 240 volts combined 2 modular complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F socket outlet modular type 3 pin 15/16 Amps, 240 volts combined 2 modular complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed. Each Excess(+) Full Conversion INR

S & F Modular fan regulator for BLDC fan ISI single pole, 230 volts, AC, two module complete all as specified and directed. Make - Legrand, Cat No-679296 of Myrius TM series or equivalent Make of ABB/ C&S Each Excess(+) Full Conversion INR

S&F modular type Bell push 6 A , 1 module complete all as specified and directed. Each Excess(+) Full Conversion INR

S &F Bell buzzer, Ding Dong AC. 230 volts, single pole completed all as specified and directed. Each Excess(+) Full Conversion INR

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F MCB SPN 40 Amp , 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F MCB SPN DP 40 Amp , 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F in repairs MCB ,SPN DB, 08 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed Each Excess(+) Full Conversion INR

S&F in repairs MCB ,SPN DB, 12 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F in replacement Double door TPN DBs 4 Way, of powder coated DB's suitable for MCB's fitted with bus bar, neutral link, earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F MCCB 4P 100 Amps 415V ,50 Hz ,breaking capacity 16 KA Including taking down unsvericeable one complete all as specified and directed. Each Excess(+) Full Conversion INR

M&L of Earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected using galvanised iron earth lead wire 4 Sqmm as earthing electrode by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe (medium grade) and other end connected to earthing test point as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be made again by the contractor at no additional cost and including dimantling complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F Exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store. Each Excess(+) Full Conversion INR

S&F Exhaust fan 300 mm sweep, steel body, AC single phase, 230 V, 50Hz, RPM 1400, with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store. Each Excess(+) Full Conversion INR

Supply and fix in repair of energy saving 1200 mm sweep BLDC ceiling fan complete with all connected accessories as specified below: - Input Power :- 26 watts with full speed and reduced power consumption with reduced speed technology. Voltage :- 90-300 V AC, 50Hz, single Phase. RPM :- 340 to 375 rpm Blades :- Decorated Sweep :- 1200 mm. Air delivery :- Not less than 210 CFM Colour :- Glow white/Toast Brown/Gloss Black/or others as approved by Engr-in-Charge Speed/power contro :- Without Remote through existing regulator Star rating :- BEE 5 Star Rating Warranty: - As specified by the manufacturer, contractor shall produce original warranty and test certificate from the manufacturer. Each Excess(+) Full Conversion INR

S&F Single Pole & Neutral enclosure with 2 pin and earth plug & socket for incorporating with single pole 20 Amp DP MCB and including taking down old unsv one complete all as specified and directed by the Engineer-in-charge. Each Excess(+) Full Conversion INR

S & F in repair Surface- mounting back-lite LED 2X2 tile in CRCA housing with full opal diffuser foe soft & glare free distribution downlighter designed in polycarbonate housing with revolutionary flicker controlled technology 36 watt - 240 V including taking down of old unsv once complete all as specified and as directed. (Cat ref LTSAQ-36-C-FC 36W of Orient) and equivelent. Each Excess(+) Full Conversion INR

S & F in repairs LED Bulk Head fitting 10 watt with Injection molded polycarbonate housing IP66, IK10, 3.5kV inbuilt surge protection, PF =0.95, total System Lumens not less than 1100 lm, 6500k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F LED AL Bulb 15W watt incluing taking down old unsv ones as specified and as directed by Engineer-in-Charge. Each Excess(+) Full Conversion INR

S & F in repairs Surface and wall mounted LED batten 10 watt 2ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.90, Efficiency not less than 110 lm/W color temp 6500k CRI = 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. Each Excess(+) Full Conversion INR

S & F in repairs Surface and wall mounted LED batten 20 watt 4ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.90, Efficiency not less than 110 lm/W color temp 6500k CRI = 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for sand coushioning to UG cables (8cm deep before laying of cables and 15 cm over the cable) including spreading, levelling, well ramming in layers complete all as specified and directed. NOTE:- punned thickness of 18cm only will be considered for measurement and payment. Cum Excess(+) Full Conversion INR

M&L for brick protection cover of size 230 x 115 x 75mm to LT underground cables with sub class ‘B’ over brunt brick, (Locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. Per 1000 No Excess(+) Full Conversion INR

Supply and fixing of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor / wall including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply, laying testing and commissoning in replacement of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 16 sqmm 4 core including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply, laying testing and commissoning in replacement of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 25 sqmm 3.5 core including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

S&F in repairs of LED Tube light fittings 1x20 W, 220 Volts, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair of wall mounted decorative type warm white in colour LED mirror light 6 watt, 2ft long in white aluminium finish complete all as specified and as directed.Make :- Philips/Havells/Jaguar Each Excess(+) Full Conversion INR

Supply and fixing of round/square shape 15 watt 220 volts AC (White/Warm white on required basis) recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling incl. connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F Changeover switch Disconnector Fuse 63 Amp 4 pole 415 volt 50Hz AC mounted on common chasis complete with mechnical interlock and Handle assembly having door interlock & Padlocking arrangememt including taking down of old unsv ones complete all as specified and directed. (ref No CSCSOF100CO4 of C&S or equivalent). Make;C&S,L&T,Havells. Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information