COMPLETION OF INCOMPLETE WORK OF SPECIAL REPAIR TO BLDG NO P-48 TO P-52, P-70, P-71, N-1 AND N-2 (56 QTRS) IN 1 WEC LINES UNDER GE (CENTRAL) DELHI CANTT-10

Amount

SCH 'A' BUILDING WORKS

Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but not exceeding 4 sqm each all as specified.

-ditto- as per item No 1.00 here in before but not exceeding 1.5 sqm each.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each for cup board all as spd.

S&F solid PVC door frame of size 50 x 47 mm made out of 5mm thick plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panal design with 2 mm thick moulded PVC Sheet on the front face & 2 mm thick Plane colour PVC sheet on back face, suppling & fixing in frame at site as per specifications & drawings.

Factory made S&F 35 mm thick 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a)

S&F 25 mm thick flush shutter solid core construction with block board core and ply wood face panel commerical type on both side to be fixed as in shutter of cupboard.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number of panels) with panels of timber flat on both sides / feather edges) of veenered particle board medium density wood particle board with commercial face veeners all as specified

S&F Mild steel barrel tower bolts, 150mm long stove enamelled black, with bright bolt and fixed.

All as per item No 10.00 above but 125mm long

S&F 300mm long mild steel sliding door bolts, plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimium of 6 bolts and nuts, four on bolt clip and two on staple plate and fixed all as specified

S&F 125 mm Mild steel hasp and staple including bolt to hinge plate and fixed with screws.

S&F 150 mm long Mild steel pressed handle ovel type, stove enamelld black.

All as per item No 14.00 here in before but 100 mm

S&F 100 mm Butt hinges stainless steel.

S&F 75 mm Butt hinges stainless steel.

All as per item No. 17.00 here in before but 50 mm.

BLANK

BLANK

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified

M&L two coat oil bound distemper(colour) over a coat of primer over a coat of 2-3mm thick JK/Birla wall care putty add over a coat of primer on walls incldg preparation of new plastered surfaces all as specified.

M&L two coat oil bound distemper(colour) over a coat of primer on old surfaces on walls including complete removal of existing treatment and applying a coat of 2-3mm thick JK/Birla wall care putty after preparation of surface all as specified (As per colour approved by Engr in charge)

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified and directed.

S&F Box type steel window with side hung double shutter including chowkhats of size 80x40x1.25mm thick (all as per Drg no. CEDZ/TD/ARCH/08 Sheet 1/6 to 6/6) Box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of red oxide or zinc chrome primer all as specified. Note: Wire mesh and glass will be measured and paid separately under relevant items.

BLANK

M & L framed work such as grills, grating with ends of bars shouldered or riveted or forged into spikes, framed guard bars and similar work confirming to Fe - 290-0 or E-165 all as specified

M&L 2 coats of synthetic enamel paint over one coat of pink primer on new wood or wood based surfaces not otherwise described over 10 cm width or girth incl preparation of new wooden surfaces all as specified

M&L 2 coat of synthetic enamel paint over a coat of red oxide or zinc chrome primer on new steel surface of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces all as specified.

S&F pressed steel frame of size 125x60mm for doors with one or more rebated including necessary fixing lugs, hinges, lock strikes plate, a coat of bitumen paint on back side of frame, etc complete all as directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as specified

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified

Demolition of cement concrete in reinforced in ground and floor and paving n. exc 15cm thick all as specified

S&F mild steel deformed or twisted bars 6 to 8 mm dia and over cut to length bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or screwing with clips.

M&L providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kitchen slab and set in cement mortar 1 : 4 all as specified.

Dismantling water tanks exc 250 Ltr & n exc 500 ltr capacity of water storage and removing from site.

S&F 500 ltr rotational moulded double layer polythylene water storage tanks cylindrical vertical with closed top, hoisted and fixed in position. Make: Sintex/Polycon/Rotex, Colour: White

S&F GI nipple suitable for HDPE water tank minimum weight 38grm for 15 mm, 45grm.

Demolition of brick work built in cement mortar including all quions arches pillars etc complete.

M&L Brick work with sub class 'B' bricks taight or curved on plan to any radious in half brick thick wall built in CM 1:4 all as specificed

M&L brick work built in cement mortar (1:4) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius as in repairing of existing drains/manholes. all as specificed

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry including de-rusting of steel reinforcement to providing fabric mild steel wire mesh 75X75X3 mm dia as reinforcement to concrete surfaces, applying adhesive admixture over steel mesh and providing minimium 40 mm thick (average thickness) guiniting mix using 1 part of ordinary portland cement 53 grade and 2 part of ghaggar sand mixed with the pressure of 2 to 2.5 kg per sqm by guinting machine including necessary plaster in CM 1:4 10mm thick to match existing surface and surfaces finised even and fair all as specificed

Taking down cement plaster including racking out joints, hacking for key, scrubbing down with water etc on walls and ceiling all as specificed

M&L 10 mm thick rendering in CM 1:3 on ceiling surfaces, finished fair even and smooth without using extra cement and applying three coat of white wash including preparation of new/undecorated plastered surface all as specified

M&L 15 mm thick rendering in CM 1:6 on internal face of wall finished even and smooth without using extra cement all as specified

M&L Washed stone grite plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement : 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer @ 3Kg of cement per square meter, top layer 15 mm thick cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specificed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls, finished fair and even mixed with water proofing compound all as specified. Note: WPC shall be measured and paid separately.

M&L two coat of cement base paint over one coat of primer alkali resistant including preparation of newly plastered surface complete.

M&L 3 coat of white wash wall including preparation of surface over newly plastered /undecorated surface.

M&L one coat of white wash on wall including preparation of old decorated surfaces.

M&L one coat of white wash on ceiling including preparation of old decorated surface.

M&L two coat of dry distemper(colour) on old surfaces of walls including preparation of surface.

M&L one coat of synthetic enamel paint including preparation of old painted surfaces of wood or wood based surfaces.

Allas per item No 53.00 here in before but on steel surfaces.

BLANK

M&L PCC 1:3:6 type C-2 (40 mm graded stone agg) as in plinth protection finished even & smooth without using extra cement, 75 mm thick.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish out of the premises all as directed.

M&L form work to sides and soffits, shelves etc including supports such as kitchen shelves and similar works rough finished surfaces not exc. 200 mm thick all as specified

M&L non skid coloured ceramic tiles (300mm x 300 mm) size and 7 to 8mm thick as in floors etc set and jointed in neat cement slurry and painted in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified. Make: Suprefine/Premium Quality tiles of Somani/Orient/Kajaria

Material and labour coloured glazed ceramic tiles 450mmx350 mm size 7 mm thick on vertical surface etc set and jointed in neat cement slurry and pointing in coloured cement all as specified including 10 mm thick cement mortar (1:4) as screed plaster complete. Make: Suprefine/Premium Quality tiles of Somani/Orient/Kajaria

M&L 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in floors, finished even and smooth using extra cement all as specified

M&L 38 mm wide of 3 mm thick glass dividing strip laid as in floors all as specified

M&L 5 mm thick 1:2 CM in sunken floor with neeru finish over 10 mm thick cement plaster in CM 1:3 mixed with water proofing compound. Note: WPC shall be measured & paid separately.

S&F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests including P or S Trap) (excluding flushing cistern & flush pipe) all as specificed. Make: Cera (1st quality), Parryware (superfine), Jaguar

Supply and fixing in repair vitreous china ware wash hand basins, white flat size 550x400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets all as specified. Make: Cera (1st quality), Parryware (Superfine), Jaguar

Supply and fixing in repairs PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any all as specified. Make: Cera (1st Quality), Parryware (Superfine), Jaguar

S & F waste coupling of PTMT ( half or full threaded). Dia of bore 32 mm all as specified. Make Prayag or equivalent

Dismantling of cast iron pipe/ RCC drain pipe/PVC joint in cement mortar, bore of pipe up to 100 mm dia all as directed.

S&F in repairs Cast Iron 75 mm Nahani trap with grating including jointing to waste pipe fixed in cement concrete all as specified.

S&F in repairs Cast Iron 75 mm floor trap with grating including jointing to waste pipe fixed in cement concrete all as specified

S&F in repairs Cast Iron branch piece, single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with parallel branches all as specified.

All as per item No 72.00 here in before but 75 mm.

S&F in repairs 100 mm Cast Iron bends (any radius) diminishing pieces or taper (large base measured) all as specified

S&F 100 mm Cast Iron soil waste and vent pipe in any length with or without ears with connecting joints, laid in trenches or in floor or fixed to walls all as specified and directed. Make: NICCO, SRIF, SKF, SINGHAL

All as per item No. 75.00 here in before but 75 mm dia. Make: NICCO, SRIF, SKF, SINGHAL

BLANK

S&F in repair 100 mm size holder bat clamp made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof all as specified

-ditto- as per item No 78 here in before but 75 mm.

Taking downn eaves gutter rain water pipe (any size of pattern) including heads shoe, brand swan neck and cleaning or fixing or removal all as specified

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints seprate etc fixed to walls laid in trenches or in floors of having pressure @4kg/Sqcm all as specified. Make: SUPREME, PRINCE, RELIANCE, FINOLEX

S&F 110 mm PVC (SWR) bends/shoe any radius all as specified Make: SUPREME, PRINCE, RELIANCE, FINOLEX

Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified

-ditto- as per item No 83.00 herein before but 20 mm dia.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm dia bore all as specified Make: Jindal (hissar), TATA, BST

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia bore all as specified Make: Jindal (hissar), TATA, BST

Refixing old steel tubing and connections in new or old position 15mm bore ( wall, ceiling, floors, etc)

-ditto- as per item No 87.00 here in before but 20 mm bore pipe.

S&F in repairs 15 mm bore angle stop valve chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe all as specified Make: Marc, Jaguar, Kohler

S&F in repair 15 mm ball valve PTMT high pressure with polythene float and flynut complete screwed for iron pipe all as specified Make: Prayag/Polutyf

S&F in repairs 15mm bore bib taps standard of cp/brass high pressure screwed for iron pipe and fixed etc all as specified Make: Marc, MOY-1020, Jaguar-LOT-23037

Supply and fixing in repairs PVC connection 15 mm dia and 45cm long with washers complete all as directed Make: Prayag/Polytuf

Supply and fixing in repairs 32mm dia and 61 cm long PVC waste pipe for WHB / sink complete all as directed

Supply and fixing in repairs MS grating CP 100mm dia of approved make including fixing with CM 1:4 to floor/nahani traps etc complete all as directed.

S&F grating doom 125 mm dia with wast hole of PTMT (minimum weight 40 gms) etc all as specified

Supply and fixing in repairs CP brass shower rose 125 mm dia fixed to 15mm pipe of revolving type all as specified.

Supply and fixing in repairs pillar taps 15 mm size, Brass CP with capstan heads, screwed down high pressure, screwed for iron pipe and fixed all as specified Make: Marc/Jaguar/Kohler

S&F waste coupling of PTMT ( half or full threaded) minimum dia 40 mm suitable for stainless steel sink etc. all as specified

S&F in repair stainless steel sink of 1 mm thick kitchen or loboaratory with plug , washer and wates, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 405mm x460mm x203mm etc. all as specified Make: Neelkanth, Janya, Prayag

M & L Machine cut Green marble stone slab 18 to 20 mm thick laid over Kitchen cooking platform in cement screed mortar (1:4) laid and jointed in grey cement slurrry mixed with pigment to match the shade of the slab incldg cutting, rubbing and polishing complete and incldg nosing of the edges half round (Stone slab shall fixed in one piece and no joint shall be allowed) all as specified

S&F in repairs 25mm drapery curtain rod mild steel powder coated wood finish including side decorative knobs, brackets and minimum 06 Nos curtain rings all as directed by Engineer-in-Charge

Supply and fixing in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of Brass CP all as specified.

BLANK

Supply & Fix mild steel 150 mm ordinary rat tail rod pattern spring including roller and roller plate with necessary bolt all as spd.

S&F brass ward rob hook (single) 50 mm to 60 mm long etc all as specified

Dismantling of brick tiles or terracing tiles single layers as on roof complete all as directed

Demolition of mud in roof any thickness inlcl plastering and leeping and disposal up to 50 meters all as specified

M&L PCC 1:3:6 type C-1 (20 mm graded stone agg) as cement concrete average 50 mm thick as in roof etc all as specified

M&L 10 mm thick screed bed in CM 1:4 when concrete is green with WPC all as specified

M&L Applying a coat of bituminius primer confirming to IS 3384 @ 0.5 ltr/sqm on prepared surface of plaster after drying of primer, applying a coat of hot blown bitumin 85/25 grade @ 1.2 kg/sqm and applying APP based Polymeric membrane minimum weighting 3 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 grm/sqm) and sealing joints by torch application complete all as specified. Over the APP memberane applying semi hot blown bitumin 85/25 @ 0.5 Kg/Sqm and dusting over the bitumin coat all as specified

BLANK

M&L for 40 mm thick brick tiles laid on cement mortar and joints graded flush and pointing in cement mortar 1:3 mixed with 5% of crude oil by weight of cement all as specified

Ditto-item No 112.00 but Except tiles

M&L cement concrete type B-1 1:2:4 (20 mm graded stone agg) in roof kerbs or mud stop rounded or chamfered on edge etc all as specified

S&F in repair stainless steel kitchen plate rack 1 mm thick four shelves made out of stainless steel sheets 1 mm thick over all size 750 mm x750 mmx 250 mm including complete all as specificed and directed.

S&F salt glazed stone ware gully traps size 125 x 100 mm square & round mouthed trap P etc. all as specified

M&L kota stone slab 18-20 mm thick in stair case for steps, skirting, dado and pillers laid over cement screed 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing complete all as specified.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracked guard and railing 60 cm long all as specified Make: Jaguar, Marc or equivalent

BLANK

M&L PCC 1:2:4 Type B-1 using 20 mm graded stone agg as in bed block of hold fast etc all as specified

Cutting holes in brick walls in built in cement mortar exc half brick but not exc full brick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M&L for cement concret 75 mm tick type C-2, 1:3:6 ( 40 mm graded stone aggregate) as in sub base finished even and rough complete all as specied.

M & L Machine pressed precast concrete interlocking pavor block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade all as specified Make: Coral/Hindustan

Sand filling under floores or in foundation including watering and consolidation all as specified.

S & F factory made PVC door frame of size 100x45mm with a walll thickness of 5mm, made out of extruted 5mm prelam PVC sheet, mitre cut at two corners and joined with 2 Nos of 150mm long brackets of 15mmx20mm MS tube 19 gauge through out the frame. The door frame shall be fixed to the walls using PVC fastners. A minimum 2 Nos for horizontal members etc complte as per manufacturers specification and direction of eng-in-charge.

S&F 30 mm thick factory made solid panel prelam PVC internal door shutter consisting of frame out of tube of 19 gauge thickness and size of 40mmx20mm for styles, top, lock and bottom rail. MS frame shall be covered with 5mm thick prelam heat moulded PVC 'C' channel of size 30x100mm forming stiles and 5mm thick prelam 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side of panel and 15mm (5mmx3mm) thick, 20mm wide cross PVC sheets as gap inserted for top and bottom rails. Panelling for 10mm prelam PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with 30mm wide x 5mm thick prelam PVC sheet beading as gap insert below top and bottom rails joineted together using sovent cement adhesive. An additional 5mm thick prelam PVC sheet strip of 20 mm width is to stuck on the interior side of the 'C' chaannel using PVC solvent cement adhesive etc complete all as specified and directed by engr in charge

BLANK

S & F anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match 15mm thick screed bed or bedding layer in CM 1:6 etc all as specified

M&L glazed ceramic tiles 300x200 mm 7 to 8 mm thick in walls etc set and jointed in neat cement slurry and pointing in coloured cement all as specified incl 10 mm th cement mortar (1:4) as screed plaster complete in skirting 100 mm high in rooms all as spd.

BLANK

SCH 'A' INTERNAL ELECTRIFICATION

Taking down carefully Aluminum/Copper point wiring light, fan/socket point complete (excluding fitting such as switches, sockets, ceiling rose, holders, regulators etc) and making good the disturbed surface to match with the existing.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing in & including rigid PVC conduit with replacement of sunken terminal MS boxes thickness and 3 mm thick hylam sheet cover for terminal boxes for including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :-

(a) One light/ fan point /bell point controlled by one , one way switch (switch to be measured and paid separately)

(b) One light point controlled by two way switch (switch to be measured and paid separately).

(c) One 5 pin socket outlet 6 Amp on the Independent with separate switches including Earth wire (Switches and paid separately).

(d) Ditto - but for one 3 pin socket outlet 5 Amp same board with cable of 1.5 sqm including 1.5 sqm copper wire to common earth and earth dolly (switches and socket to be measured and paid separately.

All as per sl item no 134.00 above but for 2.5 sqmm single core (Nominal area) PVC insulated unsheathed cable 1100 Volts grade drawn in and including medium duty concealed unplastisised PVC conduit ISI marked , and 1.5 Sqmm multi stranded copper conductor as a earth wire for power point

M&L for switch piano flush type 6 Amp single pole one way ISI marked.

M&L in replacement switch piano flush type 6 Amp single pole two way ISI marked.

M&L in replacement socket outlet 5 pin 5 Amp flush type ISI Marked .

M&L in replacement switch piano flush type 15 Amp ISI Marked

M&L in replacement socket outlet 2 in 1,5 pin 15/5 Amps

M&L ceiling rose surfaces bakelite minimum size 65x50mm with two/ three terminals ISI marked

Supply & Fix 5 stepped type electronic fan regulator PENTA WHITE ISI marked

Taking down Sub Main wiring of size 2 run of 6 sqmm and one run of 4 sqmm

Supply, and drawing in concealed PVC conduit not less than 25 mm dia medium duty incl 02 runs of single core 6.0 Sqmn (for main current) and one run single core 4 Sqmm (As earth wire) of multi stranded FRLS conductor copper conductor PVC insulated unsheathed 1100 volts, ISI marked for sub main wiring.

Taking down defective/UNSV electric meter, shifted to MES store yard, supply and fix new electronic meter single phase 240 volts, 50 Hz, 10-60 Amps capacity, digital, temper proof with LCD display accuracy clear 1.00 complete all as specified and directed by Engineer-in-charge.

S & F lamp holder insulated body with back plate for batten fitting and complete with 15 Watts CFL retrofit lamp

Supply and fix Decorative wall light complete with energy saving CFL15/11/18 Watt spiral type Make: PHILIPS, Crompton, Bajaj

S & F call bell, AC 230 Volts single pole ISI Marked

S & F bell push flush type 5 Amps single phase ISI marked

Supply and fix surface mounted FTL fitting 1X 36/40 watts with tube rod 36/40 Watt domestic electronic ballast suitable for 1 x 36/ 40 watts box type luminaires with decorative end cover including necessary electrical connection complete.

S & F factory made epoxy powder coated distribution board SP & N, 8 ways, double door 240 volts fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral standard DIN rail

M&L for load line distribution board, TPN vertical type 4 ways, 415 volts with, including incomer MCCB of rating 125 Amps 4 pole as incomer, 16 KA 415 volts and outgoing MCB SP, 10 KA, 32 Amp, 240 Volts - 9 Nos complete with metal door

S & F MCB single pole 6 Amp to 32 Amp, 240 Volt 10 KA 'C' curve lexic

S & F MCB single pole and neutral 40 Amp 240 Volt 10 KA 'B' curve Make: Legrand

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

S&F bulk head luminaire deep drawn anodised aluminium body, epoxy white powder coated, heat resistant prismatic glass cover with specially designed gasket with CFL 1X9W 'S' type

Taking down ceiling fan in hanging up after repairs and connecting up including provision of cable from ceiling rose after painting complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc & marking MES No.

Fixing only Exhaust fan AC single phase 230/240V of sweep 300mm complete with louvres Note : Exhaust Fan will be issued under Sch B free for fixing only

Fixing only Water heater (Geyser) storage type electric supplied and installed complete capacity 25 Ltr with necessary all accessories (i.e CP connection, PVC connection and fashners) Note : Water Heater (Geyser) will be issued under Sch B free for fixing only

Supply and fix in replacement building security light fitting mounted on building wall, energy conservation T5 Lamp lightning luminaries including 4x14 W FTL Lamp of including light fitting bracket made out of GI tubing 40mm dia including fixing material ie MS clamp, Nut and bolt etc suitable size of copper cable for electrical connection with independent switch, drawn in and including surface PVC conduit 20mm dia from light DB to fitting complete all as directed

Laying only cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (Heavy Duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core Note : Cable will be issued under Sch B free for fixing only

Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground cable in hard / dense soil and getting out complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified & directed by Engineer-in-Charge..

Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & directed by Engineer-in-Charge.

Supply and laying sub clas 'B' Bricks of old size ( 230 x 115 x 75 mm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer -in-Charge

S & F sheet metal enclosure with socket plug top and MCB 10Amp 'B' curve single pole with a two pin and earth plug and socket complete

Cutting chases , pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills sunshades, lintels etc. and cutting chases for concealed conduit wiring etc and making good, cutting not exc. 10 cm girth on brick walls.

Description of Work / Item(s)

Amount

M&L two coat oil bound distemper(colour) over a coat of primer over a coat of 2-3mm thick JK/Birla wall care putty add over a coat of primer on walls incldg preparation of new plastered surfaces all as specified.

M&L two coat oil bound distemper(colour) over a coat of primer on old surfaces on walls including complete removal of existing treatment and applying a coat of 2-3mm thick JK/Birla wall care putty after preparation of surface all as specified (As per colour approved by Engr in charge)

S&F Box type steel window with side hung double shutter including chowkhats of size 80x40x1.25mm thick (all as per Drg no. CEDZ/TD/ARCH/08 Sheet 1/6 to 6/6) Box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of red oxide or zinc chrome primer all as specified. Note: Wire mesh and glass will be measured and paid separately under relevant items.

M&L Washed stone grite plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement : 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer @ 3Kg of cement per square meter, top layer 15 mm thick cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specificed.

M&L non skid coloured ceramic tiles (300mm x 300 mm) size and 7 to 8mm thick as in floors etc set and jointed in neat cement slurry and painted in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified. Make: Suprefine/Premium Quality tiles of Somani/Orient/Kajaria

Material and labour coloured glazed ceramic tiles 450mmx350 mm size 7 mm thick on vertical surface etc set and jointed in neat cement slurry and pointing in coloured cement all as specified including 10 mm thick cement mortar (1:4) as screed plaster complete. Make: Suprefine/Premium Quality tiles of Somani/Orient/Kajaria

Supply and fixing in repairs PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any all as specified. Make: Cera (1st Quality), Parryware (Superfine), Jaguar

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints seprate etc fixed to walls laid in trenches or in floors of having pressure @4kg/Sqcm all as specified. Make: SUPREME, PRINCE, RELIANCE, FINOLEX

M & L Machine cut Green marble stone slab 18 to 20 mm thick laid over Kitchen cooking platform in cement screed mortar (1:4) laid and jointed in grey cement slurrry mixed with pigment to match the shade of the slab incldg cutting, rubbing and polishing complete and incldg nosing of the edges half round (Stone slab shall fixed in one piece and no joint shall be allowed) all as specified

Supply and fixing in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of Brass CP all as specified.

M & L Machine pressed precast concrete interlocking pavor block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade all as specified Make: Coral/Hindustan

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match 15mm thick screed bed or bedding layer in CM 1:6 etc all as specified

M&L glazed ceramic tiles 300x200 mm 7 to 8 mm thick in walls etc set and jointed in neat cement slurry and pointing in coloured cement all as specified incl 10 mm th cement mortar (1:4) as screed plaster complete in skirting 100 mm high in rooms all as spd.

VED PRAKASH ARORA

M/S ANIL KUMAR

A R construction

imran construction company

M/S ANIL KUMAR

VED PRAKASH ARORA

A R construction

imran construction company