Construction of Additional floor to accommodate Prisoners in Association Block 5 (First floor part and second floor) in Central Prison II at Puzhal in Chennai city (Group II)

Amount

7.2) Supply and fixing of Bituminous filler pad, 20 mm thick. for expansion joint

30) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

31) Weathering course

37.1) White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc.,

39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

41) Painting the New iron work with two coats of Synthetic enamel paint

52) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable a) 32mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

b) 25mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

52.4) Supply, laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with PVC/GI Specials c. 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.3) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each)

69) Supplying and fixing 15amps 3 pin plug type socket on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet

72) Supply and fixing of Fan hook

Electrical arrangement 74) Charges for assembling and fixing of ceiling fan

76) Supplying and laying of 8SWG GI wire on wall below ground levels

ANNEXURE 8.2.4.1) Standardised concrete Mix M25 Grade Concrete c) In First floor

d) In Second floor

e) In Third floor

11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm thick (B.P.) b) In First Floor

c) In Second floor

12.1.1) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick c) In Second floor

18.1) Providing Form work using MS sheet b) Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab, staircase, portico slab and other similar works

c) Form work for Small quantity and column using M.S. sheet

d.Vertical wall

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

29.5) Providing Lockset arrangments to the column and matt rods for using fosroc lokfix

32.1.1) Finishing top of roof with one course of Hydraulic Pressed Tiles of size 23cmx 23cm x 20mm thick laid over weathering course in CM 1:3, 12mm thick

33.2.1) Plastering with CM 1:5, 12mm thick

34.2.1) Plastering in C.M. 1:4, 12 mm thick.

35.2.1) Special ceiling plastering with CM 1:3, 10mm thick

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe with relevant specials

53.4) Supply and fixing of C.I Manhole cover 60 x 60 cm (50kg weight )

54.3.1) Supply and fixing Bib cock Auto Lapis neo closing push type (Parryware / equivalent)

56.5.1) Supplying and fixing of Stainless steel 304 Grade IWC of approved make (Other than ground floor)

56.5.2) Supply and fixing un position of unbreakable stainless steel 304 European western closet S-Trap with concealed water storing system

58.3) Supplying, laying, fixing and jointing the following PVC SWR pipes a) 110mm dia SWR pipe

59.2.1) Supplying and fixing 150mm x 100mm size stone ware Gully trap using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm)

60.1) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

67.1) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

71.3) Supply and fixing of 63A triple pole main switch

75.2) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep

77.5) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark (fully concealed )

80.2) Supply and fixing of TW plank 450 x 375 x 20 mm

88.1.1) Supplying and laying of polished shahabad slab /stone, 20mm thick with machine cut edges of size 2'x'2' below (Grey colour) of approved qualty for florring in CM 1:3 (One of Cement and three of crushed stone sand) 20mm thick and other similar works

90.2) Providing additional Strutting to centering of R.C.C slab

96.5.2) AAC block wall of 600 x 200 x 200mm useing Self curing ACC joint Mortar c. In First Floor

d) In Second floor

96.5.3) AAC partition wall size 600 x 200 x 100mm using self curing AAC joint Mortar b. In first Floor

c) In Second floor

102) Wiring with 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990,1.1 kv grade cable for Administrative block and community center controlled by 5 amps flush type switch a) light point with ceiling rose for Administrative block

b) Light point without ceiling rose

103) Wiring with 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990,1.1 kv grade cable for fan point for Administrative blocks and community center controlled by 5 Amps flush type switch

125.3.2) Providing 8 lever lock and 3 set key arrangement

162.2.1) Supplying and clamping of PVC LTUG armoured cable (Above GL) a) 3.5 core 25 Sqmm PVC LTUG armoured cable

175.1.3) Supply and fixing of triple pole and neutral 4 way 7 segment 3 tier compartmental type MCB distribution board complete with necessary incomings and outgoings etc.

207.3.1) Painting the false ceiling / walls with two coats of 1st class ready mixed plastic emulsion paint including primer coat

207.4.1) Painting the walls with two coats of 1st class ready mixed exterior Emulsion paint

209.3.3) Cleaning the Expansion joint Treatment (30mm x 15mm) provided in different places using air blower to remove dust particles and racking the bituminous pad

209.7.5) Supply and laying of PVC water Bar 150mm wide with single Bulb for expansion joint

213.1) Dismantling the damaged brick works in cement mortar in any floors without affecting the adjacent structures and clearing the debries 2km away from the site

217) Dismantling the damaged Pressed tiles laid over cement mortar and Weathering Course in lime concrete without affecting the adjacent structures

238) Anticorrosive treatment for steel reinforcement

238.1) Anticorrosive treatment for window grills

224.1) Dismantling the existing damaged RCC by manual / by using deploying machineries with out affecting the adjacent structures

381.3.1) Supply and fixing of 63 Amp three phase 500V 4 Pole change over switch

741.2) Supply and fixing of 63 Amps 30 MA four pole RCCB/ELCB (lower end)

960.4.4) Supply and fixing of 8"dia plastic plate foam plate of 3mm thick with number approved colours etc.,

T Azhakesan (BID ID -1238629)

Bidder Name

KUMARAN ASSOCIATES

T Azhakesan