PROVN OF GATE WITH FENCING FOR GTO GROUND ENTRANCE AT SCE, 01 TOILET AND 02 X BATHROOMS NEAR BLDG NO. T-69 OF SCE AND SHELTER IN FRONT OF OC OFFICE AND MT/Q STORE OF 749 (I) TPT PL ASC (CIV GT) AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and as directed.

Spreading and levelling of soil in layers n exc. 25 cm thick with well ramming including watering as required for filling under floor complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed

M&L for RCC M-25 (design mix) using 20 mm graded crushed stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed .

M&L for RCC M-25 (design mix) using 20 mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC M-25 (design mix) using 20 mm graded crushed stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete, complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface of concrete complete all as specified and as directed

Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc for rough finished surface of concrete complete all as specified and as directed

Form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed.

M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia as in strriups,spaces,nibs and binders complete all as specified and as directed.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed

M&L for half brick thick wall fly ash bricks (old size), straight or curved on plan to any radius, built with in cement mortar 1:4 complete all as specified and as directed

M&L for 5 mm thick rendering in CM 1:3 on ceiling surface & finished the surface even & fair without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or stone surface finished even and fair without using extra cement complete all as specified and as directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of bricklwall or concrete surface,finished even and fair without using extra cement complete all as specified and directed.

Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified.

Preparation of newaly plaster surface of wall and applying two coats of white wash complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone crushed aggregate in plinth protection finished even and fair including necessory form work and cutting of joints specified and as directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and as directed.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L preparation of untreated steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap & making connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR complete all as specified and directed.

S&F for vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand with & including waste pipe, brass waste fitting and union complete all as specified and directed.

M&L for 500 ltr rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F 15mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F 20mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F for 15mm bore bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F cast copper alloy CP angle stop valve or cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F fancy type Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F PVC connection 15mm bore 60cm long with brass nut at each side complete all as specified and directed.

S&F for PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints laid in trench or in floor complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 110 mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement. complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F Salt glazed stoneware drain pipe grade 'A' 150 mm bore laid in tranches and jointed complete all specified and as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Cutting holes into existing manhole brick wall built in CM, connection new drains making good to pipes and rendering cuttting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required for intenal dia of pipe 150mm complete all as specified and as directed.

Supply and fixing gun metal globe or gate valve with iron wheel head,screwed both ends for iron pipe or for unions and fixed of dia 25 mm complete all as specified and as directed.

Supply and fixing gun metal globe or gate valve with iron wheel head,screwed both ends for iron pipe or for unions and fixed of dia 50 mm complete all as specified and as directed.

Cutting of existing main distribution GI pipe 50 mm dia and inserting tee of appropriate size. including necessary all connected accessories for tapping 25 mm connection complete all as specified and directed.

S&F GI tubes medium grade of bore size 25 mm including all fixing accessories and laid in trenches or floor complete all as specified and directed.

S&F GI tubes medium grade of bore size 50 mm including all fixing accessories and laid in trenches or floor complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 2 core complete all as specified and as directed.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified and as directed.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conceal conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2 mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all acessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :- (a) One light/ fan/ bell point controlled by one switch

(b) One point for socket outlet 5 amps on independent board complete all as specified and as directed.

M&L point wiring with FR LS PVC insulated unsheathed stranded cable of size 2.5 Sq mm nominal area 1100 volts grade with one single run PVC insulated unsheathed stranded copper conductor cable of size 2.5 Sq mm stranded for earth countinuty wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia concealed in wall/ roof/ floor with MS sheet metal sunken modular switch/ terminal box 1.2 mm thick and modular plate/ frame and brass screws with cup washers complete all as specified and as directed. Note : For item No 65 to 67 :- Rate is inclusive of cutting / Chases of wall / floor/ ceiling.

S&F ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.

S&F angle/batten type holder PVC/Poly carbonate type with back plate suitable for light point complete all as specified and directed.

S&F switch piano flush type, 5 amps, 230V AC,single pole, one way complete all as specified & directed.

S&F socket out let 2-in-1, 3 pin, 5 amp flush type complete all as specified & directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including, connecting with FR PVC insulated & PVC sheathed round flexible copper conductor wire of size 23/0.0076 in three core of length not more than 1.0 Mtr complete all as specified and as directed.

S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated busbar double door fixed on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F MCB single pole & Neutral, 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F LED lighting fixture with co extruded polycarbonate body environnmental friendly , energy efficient tube light complete with all accessories internally pre-wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

S&F LED 10 W bulk head fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flrxible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED with light fitting 10 watt mirror type with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flrxible copper conductor cable of suitable size complete all as specified and as directed.

M&L for PCC (1:5:10) type E-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for steel work in tubular trusses, purlins, rafter,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for plate Fe- 290 (Gde E- 165)(plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for MS screw bolts (machine made) with 11 to 15mm dia hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and as directed.

Surface excavation n exc. 30 cm deep and average 15 cm deep in soft/loose soil complete all as specified and as directed.

M&L for 60 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block/tiles Coloured any shape and size conforming to IS 15658-2006 jointed with grey cement and pigment as approved laid over and including 30 mm thick sand cushioning complete all as specified and directed.

Removing excavated material to a distance exc 250 m but n exc 500 m and depositing where directed at level n.exc 1.5 mt above the starting point complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick wall or concrete surface,finished even and fair complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over & including 15mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 CM in soft soil complete all as specified and directed.

S&F for Fe- 290 Gde E- 165 Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, dia of shank 5 to 10mm length of bolt each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm length long complete all as specified and directed.

S&F Framed work such as ornamental iron gate grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only MS galvanised chain link fencing of size 100mmx100mm,4mm dia complete all as specified and diretced

M&L for galvanized 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx) spacing and straining and fixing to any type of post, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as shown on the drawing including straining bolts complete all as specified, directed and shown on drawings. Note:- Each line of wire to be measured separately

Technological Associates

Channa Brothers and Co.