SPECIAL REPAIRS TO LT POLES WITH ALLIED WORKS AT CERTAIN EXPLOSIVE AREA AT NAD TROMBAY UNDER GE (NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick etc complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point etc complete all as specified and directed.

M & L for sand cushioning by spreading in trenches crushed stone powder by gently by punning down manually as in cable protection etc complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenchesetc complete all as specified and directed.

Taking out old unserviceable underground cable XLPE insulated, PVC sheathed armored heavy duty aluminium conductor LT 1100 Volts grade of size upto 16 Sqmm 4 core,from trenches/ wall after disconnecting etc complete all as specified and directed.

All as per above item No 6.00 but of size 35 Sqmm 3.5 core etc complete all as specified and directed.

Relaying only serviceable armoured heavy duty 1100 volt grade electric LT UG cable of size 16 Sqmm 4 Core i.e taken out vide item No 6.00 here-in-before in trenches/along the wall, including saddles and making all connections complete as required at site etc complete all as specified and directed.

All as per Item No 8.00 here-in-before but of size 35 Sqmm 3.5 core i.e taken out vide item No 7.00 etc complete all as specified and directed.

M&L for cutting existing road/hard, dense soil not exc 45x60 cm in wide & depth getting out excavated material for laying HDPE pipe returning filling & well ramming watering and 10 cm from top using PCC 1:3:6; including removal of surplase soil etc complete all as specified and directed.

Supply, laying, connecting and testing XLPE insulated cable in trenches/or fixed on pole etc in screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with multistranded aluminium conductor, 1100 Volt grade, cross sectional area 16 Sqmm, 4 Core Conforming to IS-7098 (Part-II)-1985 etc complete all as specified and directed.

Supply, laying, connecting and testing XLPE insulated cable in trenches/or fixed on pole etc in screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volt grade, cross sectional area 35 Sqmm, 3.5 Core Conforming to IS-7098 (Part-II)-1985 etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix M-20 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc and mass concrete etc complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separately).

M & L for TMT bars of Fe-500 D grade conforming to is:1786, 12 mm dia, including cutting to length, bent to shape equired, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M & L for TMT bars of Fe-500 D grade conforming to IS: 1786, 10 mm dia bars as in binders, spacers, strippus including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , side and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished surfaces of concrete etc complete all as specified and directed.

Dismantling of old UNSV/rusted steel tubular/ RCC poles 9 mtr long including necessary disconnecting of cables and removing from site etc complete all as specified and directed. Note-: Serviceable lighting shall be keep aside for reuse.

Supply, erect and connection of hot dip galvanised octagonal poles of height 6 mtr with 130 mm bottom & 70mm top made up of 3mm thick HT sheet along with base plate of size 200 x 200 x 12mm thick including 4 nos of M20 x 600 long J type foundation bolts and 1 mtr long hot dip galvanised single arm standard bracket, including MCB of 6 Amps, with connector 4 way to be provided as termination point etc complete all as specified and directed. Note :- 1. Two run of cable protection pipe (UPVC) shall be provided in PCC foundation and rate shall be included in the quoted rate. 2. Foundation of pole shall be as per OEM recommendation and shall be paid in seperate item.

Supply & fix in repair 3 core 1.5 Sqmm size multistranded FRLS copper conductor PVC unsheathed 650 / 1100 Volt cable for interconnection of cable looping box to Street Light Fitting etc complete all as specified and directed.

Supply and laying of HDPE pipe 80mm dia for laying in ground, road/ drain crossing etc for cable protection including necessary fittings , clamps for supports, etc complete all as specified and directed.

S & F Street light fitting made up of pressure die cast alluminium body with mid power 60 Watt LED as lighting sources and PC cover having top opening seperate driver compartment with IP66 protection Including fixing arrangements etc complete all as specified and directed. Make-: Shakti/ Benlo/ Bajaj/ Havells

Refixing of serviceable light of any capacity retrieved from item no 21.00 including connection and testing etc complete all as specified and directed.

S & F Earthing complete with galvanised steel earth plate electrode size 60cm x 60cmx 6mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth lead 4mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to GI steel pole as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion etc complete all as specified and directed.

M&L for provn of Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 2.50 M below normal GL, connected to Galvanized earth strip 32x6mm upto 7.5 mtr with protection pipe by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 40mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I 2009 specification.

R J ENTERPRISES

Radha Engineering Services

bajaranga enterprises

M/s Bhagirathi Electricals

Parmatma Enterprises

A P ENTERPRISES

Urja Techniques India Pvt. Ltd.

AGRAWAL ASSOCIATES