Civil works for Sewer line and Storm Water line at DLE and RAW Material Stores and Civil Works at CH CK Hanger at Helicopter Division in HAL HC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs

I.T Returns for past 03 assessment years

Annual financial turn over during the last 3 years, ending 31st March 2025

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of ECS and cancelled cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Solvency Certificate Details

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender [Work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Demolishing cement concrete of any grade manually/ by mechanical means including disposal of material within 50 metres lead etc., including all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Excavating trenches of Pipes, cables etc. exceeding 80 mm dia. but exceeding 300 mm dia, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 mtrs, rate quoted includes all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Providing and laying non-pressure 450mm dia NP3 class R.C.C. pipes with spigot jointed with stiff mixture of cement in the proportion of 1:2 (1cement :2fine sand) including testing of joints etc. complete with approved brand of materials etc., rate quoted includes all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Constructing brick masonry chamber with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Inside dimensions 455x610 mm and 45 cm deep for single pipe line for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: rate quoted includes all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

For extra depth beyond 45cm depth of brick masonry chamber of size 455 X 610 mm etc., all complete as per directions of the Engineer-in-charge.

Supplying & laying of 1:2:4 grade concrete and levelling the same with trowel by consolidating the concrete with suitable equipment etc., rate quoted includes all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, including all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, including all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Providing, laying and levelling in position 1:3:6 grade concrete using 40 mm nominal size aggregate derived from natural sources etc., complete., including curing and all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Providing, laying and levelling in position 1:2:4 grade reinforced cement concrete using 20 mm nominal size aggregate derived from natural sources etc., complete., including curing and all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Supplying, fabrication & fixing of steel reinforcement for R.C.C. work using Thermo-Mechanically Treated bars of grade Fe-500D or more, including straightening, cutting, bending, placing in position and binding all complete, The quoted rate including all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Providing, making & fixing of Centering and shuttering for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including strutting, propping etc. and removal of form work after curing/settling period etc complete, including all lead & lift hire charges of machinery and equipment's cost of all materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Providing & applying of 15mm thick cement mortar plastering to the wall, concrete walls, retain walls etc., using 1:4 cement sand ratio at any height including scaffolding, curing etc., Rate quoted shall include all lead & lift hire charges of machinery & equipment's cost of materials labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge.

Providing & placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centring, shuttering, reinforcement of 8mm dia TMT bars Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6mm thick, 100mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12mm dia, bar for hooks etc., including cost of cartage, all leads & lift. handling at site etc., all complete as per directions of the Engineer-in-charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts etc., all complete as per directions of the Engineer-in-charge.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and above, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Providing and fixing on wall face unplasticized Rigid PVC rain water pipes of 110 mm dia conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes including shoe and inlet grating etc., all complete as per directions of the Engineer-in-charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. For gutters etc., all complete as per directions of the Engineer-in-charge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The quoted rate shall include all lead & lift, hire charges of machinery and equipment's cost of all materials, labour charges and all other incidental charges, including scaffolding, curing etc., all complete as per directions of the Engineer-in-charge.

Providing and applying (Painting) the external surface with acrylic smooth exterior paint of approved manufacture & shade to get uniform & even shade/colour for old surfaces including preparation of surface, filling the holes and cracks as per manufacturers instructions. The rate quoted shall include all lead & lift, hire charges of machinery and equipment's, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc., all complete as per directions of the Engineer-in-charge. Note : Two or more coat applied @ 1.67 ltr/10 sqm on existing cement paint surface.

Approximate Amount Put to Tender