Electrical Works of new Environmental Survey Lab..

12 way power distribution boardd (panel-2) incomer 1. 4 pole, 3 phase 100 amp, 30mA, RCBO- 01 no. Outgoing 1. 20 amp SPN MCB-36 nos.

12 way power distribution board (panel-3) incomer1. 4 pole , 3 phase 100 amp. 30 mA , RCBO-01 no. Outgoing 1. 16 amp. TPN MCB- 8 nos. 2. 10 amp SPN MCB- 12 nos.

12 way power distribution board (panel-4) incomer 1. 4 pole, 3 phase 63 amp, 30 mA , RCBO- 01 no. Outgoing 1. 10 amp SPN MCB - 24 nos. 2. 20 amp SPN MCB- 12 nos.

12 way power distribution board (panel-5) incomer 1. 4 pole, 3 phase , 63 amp, 30 mA, RCBO- 01 no. Outgoing 1. 10 amp SPN MCB- 24 nos. 2. 20 amp SPM MCB - 12 nos. Incomer shall have change over switch for two source of supply.

8 way power distribution board for street light (panel-6) incomer 1. 4 pole, 3 phase , 63 amp, 30 mA , RCBO -01 no. Outgoing 1. 32 amp TPN MCB- 2 nos. 2. 16 amp SPN mcb - 12 nos. Panel shall be equipped with photo cell and timer for ON/OFF operation of street light.

Supply of 14 SWG copper wire

Installation of 14 SWG copper earhing wire along the run of GI conduit including necessary fixing hardware like copper clip and connection to earthig terminals, lighting, junction boxes, various boards, fan as per specification.

4 core x 50 sq. mm AL

4 core x 25 sq. mm AL

4 core x 10 sq. mm CU

4 core x 6 sq. mm CU

4 core x 4 sq. Mm CU

Excavation of cable trenches of required sizes, in all sort of soil at wherever necessary . After excavation & laying the cable, back filing in the scope of contractor.

Supply and spreading of good quality sand 100 mmm below and 100 mm above the cable in the cable treench

Supply & placing of good quality fully burnt bricks of standard size tn the cable trench after cable laying and spreading of sand

4C x 50 SQ mm AL

4C x 25 SQ mm AL

4C x 10 SQ mm CU

4C x 6 SQ mm CU

4C x 4 SQ mm CU

50 SQ mm AL

25 SQ mm AL

10 SQ mm CU

6 SQ mm CU

4 SQ mm CU

With overall diameter upto 25 mm

With overall diameter above 25 mm and upto 50 mm

With overall diameter upto 25 mm

With overall diameter above 25 mm and upto 50 mm

1.5,2.5,4.0,6.0 sq. Mm PVC FRLS wire

Primary wiring points wiring from all Ist. Panels/DB/SB or SB to SB to first light/Fan point using 2 x 2.5 sqmm (phase & neutral) + 1 x 1.5 sqmm (Earth) Cu PVC wires.

Secondary wiring points extending primary circuits to varous light points 2 x 1.5 + 1 x 1.5 sq. Mm Cu PVC wires from primary point.

Supply of modular type switch 6/10A. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of modular type swith 16/20A. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of moduar type plug socket 6/10A, 5 pin. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of moduar type plug socket 16/20A, 6 pin. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of modular type step fan regulator 100W, 1M. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of modular type plug socket 20A, twin socket, 2M. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of modular type mini MCB 25A, single pole, C-type, 1M. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Installation of different modular type switches, socket, Fan regulators in duly erected modular box with base frame & cover plate, internal wiring connections shall be in scope of contractor. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

Supply of 16 Gauge metal concealted /surface bs with modfular plates with base frame of following modules. Make-Anchor/Roma/MK/Legrand/Havells/Clipsal

3 Module

4 Module

6 Module

8 Module

12 Module

16 Module

Installation of metal concealed box/metal box with base frame and its cover plate in the wall.ceiling by making required groove for following modules

3 Module

4 Module

6 Module

8 Module

12 Module

16 Module

LED fixture, 1 x 12-18W (Recess Mounting)

LED fixture, 1 x 4-8W (Recess Mounting) Suitable for Toilet/Bathroom

LED fixture, 1 x 3-9W (Wall/Surface/Mounting) Suitable for Washbasin area

LED fixture, 1 x 12-18W (Wall/Surface Mounting) Suitable for staicase and entrance area

LED fixture, 1 x 6-10W (Wall/Surface Mounting) Bulkhead for outdoor area

Outdoor street light LED fixture 1 x 20-30W

All type of lighting fixtures indicated sr. No. 26.1 to 26.5 at various location of building

Mounting of street light on pole as per specification

Supply of following type 415V AC, 63A 3f AC power receptacle with MCB

Industrial type 415V AC, 63A, 3 f AC power receptacle with MCB

supply of 150mm W x 75 mm H x 2 mm perforated cable tray with cover

supply of 90 mm W X 20 mm H , GI performed cable tray.

supply of 1.1 KV grade, AL, ARMD, 3.5 C X 240 sqmm cable with XLPE insulation and FRLS PVC outer sheath. Make: Polycab / RR cables/ Finolex

supply of 100 W LED flood light. Make: Bajaj/Philips/Crompton Greaves/Wipro/Osram/Syska/Havells

supply of 3C X 2.5 sqmm FRLS TRS cable. Make- Polycab/RR cables/ Finolex

supply of GI clamp for lightning protection

supply of Cable route marker

supply & installation of PVC casing caping.

supply & installation of fan hook

supply & installation of 1 mtr long fan rod.

supply & installation of panel shed

Supply & installation of 200 mm hume pipe for cable laying.

laying and termination of 3C X 2.5 sqmm FRLS TRS cable.

Installation of of GI clamp for lightning protection including supply and installation of anchor fastner

Installation of 50 mm X 6 mm GI strip for lightning protection

Installation of 35 mm X 6 mm GI strip for lightning protection

installation of test link for lightning protection

Installation of 3 mtr length 40mm dia MS rod for lightning protection system with necessary excavation in soil

installation of 150mm W x 75 mm H x 2 mm perforated cable tray with cover along with supply and installtion of cable tray support and anchor fastener.