BEAUTIFICATION WORK FROM DPS SQUARE TO LILAWATI CHOWK OF PRATAP VIHAR HOUSING SCHEME.

ROAD WORK Dismantling of flexible pavement ( bituminous course ) by mechanical means / manual means and disposal/ stacking of dismantled material up to a lead of 50 meter , as per direction of engineer in charge. DSR 2023/15.59

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 2023/15.3

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar DSR 2023/15.7.4

Removal/ tansportation of all type of eath/ soil, debris, ash etc. including loading, carting upto a lead of 4 Kms, unloading

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil DSR 2023/2.6.1

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. DSR 2023/16.1

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25 DSR 2023/16.78.2

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the san the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR 2023/16.91.2

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20 mm thick base mortar 1:4 (1 cement: 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge. DSR 2023/16.92

Providing and laying compacted dence graded bitumenous mecadam on prepared surface with 100-120 tonnes per hour batch type Hot mix plant producing an average ouput of 75 MT per hour using 4.25% bitumen and crushed agregated of speccified grading- II(19 mm Nominal Size), transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and aligment,rolling with smooth wheeled vibratory (8-10 tonnes) roller for initial brake down rolling finish rolling by smooth wheeled tondom roller (8-10 tonnes ) to achieve the desired compaction, including supply of all materials, labour T&P etc. required for proper competion of the work as per clause 504 of MOSRT & H specification sand as per direction of the Engineer in charge SOR 2022/AR

Providing and laying compacted bitumenous concrete with 100-120 tonnes per hour batch type Hot mix plant producing an average ouput of 75 MT per hour using crushed agregated of speccified grading-I premixed with 60/70 bitumenous binder @ 5.00 % by weight of total mix and hydrated lime @ 2% by weight of total mix, transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and aligment, rolling with smooth wheeled vibratory (8-10 tonnes ) roller for intial brake down rolling,k finish rolling by smooth wheeled tondom roller (8-10 tonnes ) to achieve the desired compaction, including supply of all materials, labour T&P etc. required for proper completion of the work as per clause 509 of MOSRT & H specification sand as per direction of the Engineer in charge. SOR 2022/(A.R.)

Providing and applying tack coat with 80/100 (VG10) bitumen using emulsion pressure distributor at the rate of 0.30 kg. per sqm on the prepared bitumeneous / granular surface cleaned with mechanical broom including supply of all materials, labour T&P etc. required for proper completion of the work as per clause 503 of MORT&H specification and as per dierction of the Engineer in charge SOR 2022/(A.R.)

Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. DSR 2023/16.62

P/F OF CAT EYES 100MM SOR 2018/SI NO. (10.22)

Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. DSR 2023/16.65

ROAD DIVIDER Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M25 grade with minimum cement content of 330 kg /cum D.S.R.-2023/5.33.2.1

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. MS AND Medium tensile steel bars DSR -2023/5.22.1

Centering and shuttering including strutting, propping etc. and removal of form for Walls any thickness including attched pilsters, butteresses, plinth and string courses DSR 2023/ 5.9.2

DRAIN CULVERT Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform DSR 2023/5.9.3

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR 2023/5.9.2

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and bending all complete above plinth DSR 23023/5.22A.1

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg/cum DSR 2023/5.33.2.1

Supply of Crossroad Mashaal shape SS statue in Statue fins SS304 with thickness of 2mm mirror finish. Statue fins box width 100mm thickness 20mm, length 6700mm, Statue foundation template plate MS plate 8mm thick, Statue foundation plate 10mm SS304 Statue nut and bolt all in SS304 grade Statue dimensions Height 5-6 meter Statue Dia 1.5-7mtr

water fountain

HORTICULTURE Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. DSR 2.1

Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment). DSR 2.2

Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) DSR 2.4.3

Mixing earth and manure in specified proportion or as directed. DSR 2.9

Rough dressing the trenched ground including breaking the clods. DSR 2.5

Fine dressing the ground DSR 2.7

Spreading of mixed good earth and manure in specified proportions as above and in required thickness. DSR 2.8

Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. DSR 2.6

Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge DSR 7.59

Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge. DSR 7.75

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge DSR 7.5

Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor. DSR(H&L)/2023-2.61

Please Enable Macros to View BoQ information