Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹21.2 L+₹4,409 (0.21%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹21.5 L+₹32,274 (1.53%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹24.7 L+₹3.6 L (16.8%)Admitted-Finance | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Expert Drillers L4 | Friends Tubewell L2 | Shri MahaLakshmi Rigs L1 | Bharti Borewell and Cement Products L3 |
|---|---|---|---|---|---|---|---|
| 1.00Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 03 Nos Locations in District Jammu of Jammu Province on Turnkey Basis (EPC) under UT Capex Budget 2022-23 | |||||||
| 1.01 | Deep drilling of bore hole 125 mm dia. upto 85mtrs below ground level or above as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions. | 85 | Mtr | 4,444 ₹3,77,740 | 2,800 ₹2,38,000 Lowest | 2,888 ₹2,45,480 | 2,900 ₹2,46,500 |
| 1.02 | Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments. | 85 | Mtr. | 4,444 ₹3,77,740 | 2,400 ₹2,04,000 Lowest | 2,400 ₹2,04,000 Lowest | 2,435 ₹2,06,975 |
| 1.03 | Providing of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job. | 1 | Set | 44,444 ₹44,444 | 35,000 ₹35,000 Lowest | 36,000 ₹36,000 | 37,000 ₹37,000 |
| 1.04 | Providing of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly | 1 | Set | 44,444 ₹44,444 | 26,000 ₹26,000 Lowest | 30,000 ₹30,000 | 29,500 ₹29,500 |
| 1.05 | Cost of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector. | 2 | Nos | 4,444 ₹8,888 | 1,200 ₹2,400 Lowest | 1,315 ₹2,630 | 1,360 ₹2,720 |
| 1.06 | Cost of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code | 2 | Nos | 444 ₹888 Lowest | 450 ₹900 | 450 ₹900 | 450 ₹900 |
| 1.07 | Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole. | 85 | Mtr | 444 ₹37,740 | 465 ₹39,525 | 300 ₹25,500 Lowest | 480 ₹40,800 |
Tender Value
Refer Docs
EMD Value
₹2.0 L
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Jal Shakti (M) GWD Division Jam
Executive Engineer Jal Shakti (M) GWD Division Jam
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of
2022_PHE_200938_1
e- NIT NO. GWD/170 of 2022-23
Open Tender
Drilling Works
Item Rate
112 days
25 Nos Locations in Various District of Jammu Prov
As per SBD
9 documents required · 9 mandatory
₹2,000
Yes
Executive Engineer Jal Shakti (M) GWD Division Jam
₹2.0 L
Yes
Office of the Executive Engineer Jal Shakti (M) GW
12 Jan 2023
27 Dec 2022
9 Jan 2023
27 Dec 2022
7 Jan 2023
2 Jan 2023
31 Dec 2022
Amount
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 03 Nos Locations in District Jammu of Jammu Province on Turnkey Basis (EPC) under UT Capex Budget 2022-23
Deep drilling of bore hole 125 mm dia. upto 85mtrs below ground level or above as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions.
Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments.
Providing of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job.
Providing of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly
Cost of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector.
Cost of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code
Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole.
Description of Work / Item(s)
Amount
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 04 Nos Locations in District Samba and 03 Nos Locations in District Kathua of Jammu Province on Turnkey Basis (EPC) under UT Capex Budget 2022-23.
Deep drilling of bore hole 125 mm dia. upto 85mtrs below ground level or above as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions.
Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments.
Providing of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job.
Providing of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly
Cost of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector.
Cost of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code
Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole.
Description of Work / Item(s)
Amount
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 03 Nos Locations in District Udhampur, 01 No. Location in District Reasi and 02 Nos Locations in District Ramban of Jammu Province on Turnkey Basis (EPC) under UT Capex Budget 2022-23.
Deep drilling of bore hole 125 mm dia. upto 85mtrs below ground level or above as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions.
Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments.
Providing of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job.
Providing of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly
Cost of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector.
Cost of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code
Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole.
Description of Work / Item(s)
Amount
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 03 Nos Locations in District Rajouri and 06 Nos Locations in District Poonch of Jammu Province on Turnkey Basis (EPC) under UT Capex Budget 2022-23
Deep drilling of bore hole 125 mm dia. upto 85mtrs below ground level or above as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions.
Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments.
Providing of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job.
Providing of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly
Cost of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector.
Cost of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code
Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole.
Friends Tubewell
Bharti Borewell and Cement Products
Expert Drillers
Expert Drillers
Shri MahaLakshmi Rigs
Bharti Borewell and Cement Products
Bharti Borewell and Cement Products
Expert Drillers
Friends Tubewell
Friends Tubewell
Shri MahaLakshmi Rigs
Expert Drillers
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .