Development of Heritage Park, Parade Ground, Opposite Lal Quila, Chandni Chowk, Delhi

Amount

P/F tensile fabric UV protected flame retardent in required colour and shape inclusive all taxes including the umbrella made up of M S Steel as per drawing attached and as per direction of Engineer in Charge.

Stone work (machine cut edges ) for wall & floors backing filled of required size as per image attached, with a grout of 12 mm thick cement mortar 1:3 (1 white : 2 stone dust) with an admixture of pigment matching stone shade hard blue stone cobbles 100 mm thick and as per direction of Engineer in charge.

Providing and fixing 15x15x10 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.

Gwalior stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,as per direction of Engineer in charge with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 20 MM THICK

Providing and fixing M S Grill & MS Gate in required pattern as per image enclosed , all complete as per direction of Engineer in charge.

Providing and fixing stone jali 20mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand)as per image attached, including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc,as per direction of Engineer in charge Raj Nagar Plain

Providing and fixing stone jali 20mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand)as per image attached including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc ,as per direction of Engineer in charge Gwalior stone stone

Champhering of Edges of Existing Sand Stone 5 mm by 5 mm in required pattern as per image enclosed i/c rubbing and polishing to match the shade of the stone , all complete as per direction of Engineer in charge.

Providing and fixing stone work as per image enclosed in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, block without any chamfers etc, complete as per direction of Engineer in Charge. White marble stone

Providing and fixing stone work as per image enclosed in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, block without any chamfers etc, complete as per direction of Engineer in Charge. Red sand stone

Roughening of Existing Red stone in Continous upto 2 mm deep Grains , as per image enclosed and as per complete direction of Engineer in charge .

Applying two coats of Sealer on the Existing Sand Stone walls & Floors @ 0.20 Litre per sqm of compound concentrated 1:9 as to making the stone with in the permissible water absorption as per IS Code, complete as per direction of Engineer in Charge.

Description of Work / Item(s)

Amount

Wiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC installed copper conductor single core cable in surface / recessed PVC conduit, with piano type switch phenolic laminated sheet, suitable size M.S. box and earthling the point with 1.5sq.mm. FRLS PVC installed copper conductor single core cable etc as required. Group

wiring for twin control light point with 1.5sqmmFRLS PVC insulated copper conductor single core cable in surface /recessed PVC conduit, 2 way piano type switch phenolic laminated sheet, suitable size M.S. box and earthling the point with 1.5sq.mm. FRLS PVC installed copper conductor single core cable etc as required.

Supplying & fixing metal box of 180mm X 100mm X 60mm deep(nominal size) on surface or recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6pin 5/6 &15/16 amps socket outlet and piano type switch, connection painting etc. as required

Installation, testing and commissioning of pre-wired, Panel fitting , complete with all accessories and . directly on ceilingl, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (A) upto 450 mm sweep

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required. 4 X 10 sq. mm (25 mm)

4 X 25 sq. mm (28mm)

3 x .25 Sqmm

4 x 10 Sqmm (25mm)

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing 6Way Double Door(4+18), horizontal type three pole nd neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (A) 40 mm

Supplying and fixing 5amps,to 32 amps rating, 240 volts, "C" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. Single pole

Triple pole and neutral

Supply and fixing following rating, double pole, 240 volt, isolator in the existing MCB DB complete with connection, testing and commissioning etc, as required. (A) 40 Amp.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1 kv grade of following size in the existing surface as required Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existing masonry open duct as required. Upto 35 sqmm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required.

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubical panel making connection, etc as required 4 pole MCCB,100A,30KA

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

S & F of electronic fan regulator 1200/1400mm sweep A.C ceiling fan on existing switch board as required

Providing and fixing following rating and breaking capacity TPMCB in existing cubicle panel board including drilling holes in cubical panel making connection, etc as required 6.00 - 32 Amp, 10KA TPMCB

63 Amp, Four Pole Isolator

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm OD

Supply of 12'(300mm)sweep 900 rpm decorative fresh air fan in Plastic body complete with shutter etc as required. ISI marked.

Supply & Fixing of 400 mm wall fans complete with blades ,jaal workable on 220/240 V AC supply etc as reqd.

Fabrication, supply, installation, testing & commissioning of 15 cm to 30 cm deep cubical panel type panel board made out of 1.6 mm thick ms sheet equipped with neutral link Aluminum bus bar 400 amp capacity suitable in all compartment accommodate accessories/ switch gear including interconnection with solid alum. bolt of all switch gear termination on both side incoming/ outgoing complete two coats of approved quality color of enameled paint, earthing etc as reqd.

Supply of PVC insulated PVC sheathed Al. conductor armored cable for working voltage up to 1.1 kv confirming to IS 1554(part-1) of following size 4 X 6 sqm

Supply & laying of PVC insulated Cu. armoured Cable 3x2.5 Sqmm for working voltage up to 1.1 kv confirming to IS 1554(part-1)

Syntex Termination Chamber including 16A Cable Connector and DP MCB mounting rail (Size L-9",B-7.5",H-4") Model-Line3-O/S with two holes for cable

Supply of 12 W LED linear pathmarker glazer with 3000K replaceable electronic driver with 70,000 hours LED life & , Operating temperature : -35⁰C to +50⁰C, housing made of aluminium die cast body & Steel cover with transparent toughened glass & RAL 7040 Body Color tempered transparent glass cover. The cover uses stainless steel. Luminaire has a beam angles of 30×65°. The diffuser use thickened toughened glass, having an advantages in impact resistance and abrasion. Luminaire should have IP67 and Impact Resistance of IK 08, THD should be less than 10, replacebale LED driver. Luminaire should be capable of operating at line voltage of 230V AC. Excellent design in heat radiation performance, So that the temperature of the cover is low, which is safe and provide good protection. Dimensions-diameter 186 height-116mm. Havells ENGROSS MIDI 15W DMX. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate. Havells LINELIGHT MINI 12W LED with waterproof power supply

Supply & Fixing of integrated LED ground recessed upligthing luminaire with Die-cast aluminium,tempered transparent glass cover, wattage not exceeding 6W with lumen output of not less than 370. OSRAM/NICHEA/CREE Luminaire should have Hard chrome plated stainless steel SUS 316L grade front ring. It shall have ABS 015 mounting sleeve. The fixture will be required to be added wuth Honeycomb louvre accessory on the front glass for anti-glare application. Luminaire has a choice of architectural uplighting optics with beam angle of 20-22degrees and should be available in CCTs of 3000 K Luminaire should be capable of operating at line voltage without any separate power supply at 24 V DC. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total IP66 and IK09 protection should be provided. L Dimensions- Ø116 , height-76mm. One driver will be required to be used with 15Nos fixture only. Quoted price would include gel connectors/drivers/accessories/fittings required for installation of product.

Supply & Fixing of integrated LED ground recessed upligthing luminaire with Die-cast aluminium,tempered transparent glass cover, wattage not exceeding 31W with lumen output of not less than 1856. The Luminaire body uses high pressure die-casting aluminium. The cover uses stainless steel while the buried barrel uses high-quality corrosion resistant nylon . Luminaire has a choice of architectural uplighting optics and should be available in 3000K colors upto 16million options. The diffuser use thickened toughened glass, having an advantages in impact resistance and abrasion. the diffuser and light cover is at the same level. The source light adopts high quality LEDs, monochrome or RGB color available.Driver should have IP67, THD should be less than 10, Luminaire should be capable of operating at line voltage without any separate power supply at 24 V DC. Excellent design in heat radiation performance, So that the temperature of the cover is low, which is safe and provide good protection . High strength toughened glass, can withstand a weight of 3.4 KG. Dimensions-diameter 228 height-185mm. One driver will be required to be used with 6 fixture only.Quoted price would include all gel connectors/drivers/accessories/fittings required for installation of product.

Supply & Fixing of integrated LED ground recessed upligthing luminaire with Die-cast aluminium,tempered transparent glass cover, wattage not exceeding 16W with lumen output of not less than 890. The Luminaire body uses high pressure die-casting aluminium. The cover uses stainless steel while the buried barrel uses high-quality corrosion resistant nylon . Luminaire has a choice of architectural uplighting optics and should be available in 3000K . The diffuser use thickened toughened glass, having an advantages in impact resistance and abrasion. the diffuser and light cover is at the same level. The source light adopts high quality LEDs, monochrome or RGB color available.Driver should have IP67, THD should be less than 10, Luminaire should be capable of operating at line voltage without any separate power supply at 24 V DC. Excellent design in heat radiation performance, So that the temperature of the cover is low, which is safe and provide good protection . High strength toughened glass, can withstand a weight of 2.5 KG. Dimensions-diameter 200 height-185mm. One driver will be required to be used with 6 fixture only.Quoted price would include all gel connectors/drivers/accessories/fittings required for installation of product.

Supply of LED 3000K projector light housing made of Die Cast Aluminum, wattage not exceeding 45 W with lumen output of note less than 2704. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°/25°x60° degree as per the site conditions. Fixture should be with Die Cast Aluminum, powder-coated finish RAL7040.Luminaire should be capable of operating at separate loop line for control wires so that all the lights keep working during malfunctioning of any cables or short cicuiting. Should be able to work in the voltage range of 100-270 V AC. Lifetime should be at least 50,000 burning hours at L70 at 50 degree centigrade with total IP66 protection should be provided. Certifications Third party NABL/UL / cUL, Temperature Range 0ºC to 45ºC start-up temperature, 0ºC to 50ºC operating temperature. Work should be complete with necessary factory made weather proof cable, lenses, and external power & data supply , wiring, junction boxes, provisioning of power and data cabling etc. as required. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM-79-08. THD should be less than 10, ENEC, CE approved driver will be required. All relevant tests Heat Resistance Test, Thermal Test, Ingress Protection Test, Electrical / Insulation Resistance Test, Endurance Test, Humidity Test..

Supply, Installation, Testing & Commissioning of LED Step Light, fixture should be: IP 66and IK 07 made up Pressure die-cast aluminium housing for sturdiness, excellent corrosion resistant and efficient thermal management grey finish and Clear poly carbonate cover Length (L) 196mm, Width (W) 129mm, Height (H) 85mm, with Operating temperature: -10°C to +45°C. wide and symmetrical light distribution with system wattage of 7W, with system Efficacy of 25 lm/w or more, system lumens > 180 lms ,Powered by an integral isolated led driver with insulated sleeve and Power factor > 0.90, CRI > 70, CCT 3000K (ANSI Tolerance),THD(%) < 15, LED chip of Nichia, Osram, Cree make, LED Lamp Efficacy > 100 Lm/W with Average life L70B50 @ 35000 hourss, Interal Driver SPD of 2.5kV. The product should be BIS approved with R number mentioned on product label. Havells make RADIANTNEOFT07WLED830SASYMBOPC. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate.

Supply and installation of 70W LED Post top, fixture should be: IP 65 and IK 07 made up of Elegantly designed die-cast aluminum housing with heat sink for efficient thermal management, sturdiness and excellent corrosion resistant. Al. canopy with classic design to enhance the aesthetic of the fixture. Two nos. die-cast aluminum arms & AL. Die cast Spigot are provided to support the housing.with Operating temperature: -10°C to +45°C. Epoxy powder coated black after phosphochromate treatment., Suitable for pole mounting with OD of Ø76 mm with 3 nos. allen screws M8x16 mm High quality UV Stabilized poly carbonate opal cover is used over LED module to provide glare free Light. , Powered by built-in, isolated Potted electronic LED driver with Power factor > 0.95, CRI > 70, CCT 5700K (ANSI Tolerance),THD(%) < 10, LED chip of Nichia, Osram, Cree make, LED Lamp Efficacy > 130 Lm/W with Average life L70B50 @ 50000 hourss, Interal Driver SPD of 4kV and external SPD of 10kV. The product should be BIS approved with R number mentioned on product label. Havells makeTYCOONPT70WLED730PSYMTOPC To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate.

6 Mtr. Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish. Compatible for all Havells post top range. Window - Hot dipped galvanized mild steel step pole. Elliptical Aluminum sheet with HAVELLS in grey color is riveted to the pole. Standard height of 3.5 & 6 mtr., Grey UV stabilized pure polyester coating after hot dipped galvanizing. Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole. Mild steel base plate of Ø 268 mm with 4 no. elliptical holes of 20x42 mm on 210 mm PCD suitable for M12 bolts. Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole.

Supply & Fixing of integrated LED ground recessed upligthing luminaire with Die-cast aluminium,tempered transparent glass cover, wattage not exceeding 6W with lumen output of not less than 370. OSRAM/NICHEA/CREE Luminaire should have Hard chrome plated stainless steel SUS 316L grade front ring. It shall have ABS 015 mounting sleeve. The fixture will be required to be added wuth Honeycomb louvre accessory on the front glass for anti-glare application. Luminaire has a choice of architectural uplighting optics with beam angle of 20-22degrees and should be available in CCTs of 3000 K Luminaire should be capable of operating at line voltage without any separate power supply at 24 V DC. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total IP66 and IK09 protection should be provided. L Dimensions- Ø116 , height-76mm. One driver will be required to be used with 15Nos fixture only. Quoted price would include gel connectors/drivers/accessories/fittings required for installation of product.

Supply and installation of 9W LED spike light with lumens > 800 lms, Power factor > 0.95, CRI > 80 with IP66 and IK07 Gray pure polyester powder coated ,Pressure die-cast aluminium housing for efficient thermal management, sturdiness & excellent corrosion resistance & High quality toughened glass in clear finish for uniform light distribution.The housing provides IP66 protection for high reliability in outdoor applications. High efficiency long life COB LED mounted on MCPCB of fixture. Lumen efficacy of LED >140 lm/W. . with aluminum heat sink for effective thermal management with Operating temperature: -10°C to +45°C. Havells LYCUSSPS9WLED730PSYMBOTG. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate.

Supply and Installation of DownLighter Surface mounted, KL-3647 Cylin Mini,Wattage : 12W color temperature -3000K Rating IP65

Supply and Installation of DownLighter Surface mounted KL-4242 Diya, Wattage -20W color temperature -3000K Rating IP65

Description of Work / Item(s)

Part -A - Civil work based on DSR Item

PART B Civil work based on Market Rate Item

PART C Electric work