PROVISION OF CHAIN LINK FENCING ALONGWITH FOOTPATH BEHIND NECKLACE AREA AT DRDO ESTATE UNDER GE I RND PASHAN PUNE

Amount

M& L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

M& L for Hardcore of gauge exc 63 mm but n exc. 100 mm, of broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

M& L for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100 mm thick as in sub base complete all as specified and directed.

M& L for Cement concrete type B1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstanding complete all as specified and directed.

M& L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and Path and similar work; vertical or to batter for rough finish complete all as specified and directed.

M& L for Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' th of slab 100mm complete all as specified and directed

M& L for Removing excavated materials to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5mtr above the starting poing complete all as specified and directed.

M& L for Clearing jungle including up rooting of rank vegetation, green bush wood trees and saplings of girth up to 30 cms measured at a height of 1.0 m above ground level and removal of rubbish / soil up to a distance of 1 Km out side the periphery of the area cleared complete all as specified and directed.

M& L for Grubbing up tree trunk including cutting of trunk portion rotruding over ground, the girth of the trees shall be taken at 1 m above ground level. digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site. Girth of tree Exc. 30 cm and n exc. 100 cm complete all as specified and directed.

M& L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

M& L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and directed.

M& L for Cement concrete in foundations, filling and mass-concrete type D2 1:4:8 (40 mm graded aggregate) complete all as specified and directed.

M& L for Walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

M& L for Returning, filling in soil including watering, well ramming, etc, as in soft loose or hard / dense soil complete all as specified and directed.

M& L for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches, wall or in floors complete all as specified and directed.

M& L for Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses 20 mm deep in granite or trap stone complete all as specified and directed.

M& L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:3) complete all as specified and directed.

M& L for Providing PCC 1:2:4, type B0 ( using 20 mm graded aggregate) as in coping including necessary form work complete all as specified and directed

S& F MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290-) or grade E-165 complete all as specified and directed.

S& F for Framed work such as grills, gratings, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete to be prepared for hanging or sliding with hooks and hinges, steel hanging door fittings complete all as specified and directed confirming to Fe 290 Gde E 165.

Supply only rust proof PVC coated chain link fencing of any size and Gauge as approved by GE confirming to IS 2721 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire or welding with iron angle complete all as specified and directed.

M&L for Preparing newly plastered or unplastered surfaces of wall and applying two coat of exterior emulsion (weather proof) over a coat of primer after preparation of surfaces at any height including necessary scaffolding etc complete all as specified and directed.

M& L for Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc / red oxide primer complete all as specified and directed.

S& F for Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing conforming to IS 278 to any type of standard rails, straining bolts including securing or tying at crossings with and provision of mild steel wire staples or steel pins, etc complete all as specified and directed. Make and sample approved by GE.

Supply & Erection of ZAL SRPBT fence comprising of 600mm dia helix coil (before streching) composed of ZAL SRBT tape and 2.60mm galvanised HTSS core wire, each concertina coil shall be having minimum 6 circles per running meter of fence: Rozar punch tape shall be hot dip alloy coated comprising of aluminium with Zinc (ZAL) which shall thereafter be subjected to conversion coating treatment and final acrylic polyurethane top coating of green shade : ZAL SRBT barbs with dimensions as 23.15mm barbs length 36.00mm spacing including 3 nos of consec XAL SRPBT horizontal runner strands on fence post over the boundary wall alongwith GI erection accessories like box clips, C clips, J clips for coil joining during erection complete all as specified and directed.

Mehta Construction Co.

L.K.R.TIWARI CONSTRUCTION

Mourya Construction

tulsani associates

H S TAKHI

G K Shinde

N. H. Saluji & Associates

SHAH BUILDERS

Prasur Electricals & Engineering Co.