Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | L1 | Accepted-AOC SINCE L1 | |
| 2 | L2₹33.9 L+₹1.2 L (3.53%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT L1 | |
| 3 | L3₹36.2 L+₹3.4 L (10.3%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT L1 | |
| 4 | L4₹37.9 L+₹5.1 L (15.7%)Rejected-Finance | L4 | Rejected-Finance SINCE NOT L1 | |
| 5 | L5₹39.6 L+₹6.9 L (20.9%)Rejected-Finance ALPHA HOUSE PLOT NO 29 AGP P10 ASHWIN SECTOR NEW CIDCO NASIK 422 009 | NASHIK | MAHARASHTRA | 422009 | L5 | Rejected-Finance SINCE NOT L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DEOLALI
GE DEOLALI, 422401
CERTAIN REPAIRS TO BLDGS OF E M INSTALLATIONS, APPROACH ROAD FOOTPATH AND ALLIED WORKS UNDER THE AOR OF GE DEOLALI
2023_MES_625111_1
8334/E8
Open Tender
Civil Works
Item Rate
180 days
GE DEOLALI
class D cat a i
8 documents required · 8 mandatory
₹500
Yes
GE DEOLALI
₹90,000
Yes
7 Mar 2024
26 Oct 2023
23 Nov 2023
26 Oct 2023
21 Nov 2023
9 Nov 2023
Amount
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sq. m each etc complete all as directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each etc complete all as directed.
Taking down Shutters exc 1sq.m & n exc 2 sq.m each
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as directed.
M&L for Brickwork with fly ash bricks Old size bricks in cement mortar 1:6, straight or curved on plan exc 6m mean radius, built in complete all as directed.
Labour only for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as directed.
M& L Stone masonry Walling of random rubble, uncoursed as well bonded built in CM 1:4
All as per sr. item No. above but except stone
Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor etc complete all as directed.
Demolition of plain cement concrete unreinforced in ground floor and paving above or below ground level any thickness etc complete all as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.
M&L for 15 to 18 mm thick black granite (Table rubbed and polished) as in jambs, steps, pillars, window cills, platforms and the like with and including 15mm bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of granite etc complete all as directed.
Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed.
S&F 30mm thick flush door shutters solid core construction with block board core and if one face is covered with decOrative face veneer with lipping/frame to match plywood face panels commercial type on both sides etc complete all as specified and directed.
S&F 28-30 mm thick prelamited moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified
S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc complete all as directed.
S & F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc complete all as directed.
S&F 100mm size butt hinges,S/S, with stainless steel hinge pin, bright polished and fixed etc complete all as directed.
S & F 150 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed.
S&F 150mm size aluminium anodised hasp and staple with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as directed.
S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.
M&L for machine cut hand dressed to true square/rectangles of uniform size kota stone slab flooring 20-25mm thick of size 450 X 600mm laid in floors with and including 15mm thick CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing etc complete all as directed.
All as per item no above but in skirtings including 10mm thick CM 1:4 backing coat etc complete all as specified and directed.
M & L for glazed ceramic coloured joint free tiles in vertical surface 450X 300X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.
M & L for Non - skid Glossy finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
M & L for cement concrete Type B2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified.
M&L RUBBER MOULDED COLOURED Chequered cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed with white cement and pigments in floors including 15 thick Screed bed in CM ( 1:4) for laying floor finishes
S&F 60 mm thickness M-35 Grade factory made coloured rubber moulded machine pressed precast conctete interlocking paver block in grey cement with pigment glossy fininsh and of approved size and shape and size confirming to IS 15658-2006 etc complete all as directed.
M&L for 30mm thick sand bedding layer for concrete paver tiles laid to true line, level watered and mechanically compacted etc complete all as directed.
M&L for 10mm thick rendering CM 1:6 on fair faces of brickwork or concrete surfaces finished rough true to the plumb surfaces is obtained etc complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as directed.
M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol.
M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 1.5 to 2mm thick birla white cement putty,sanding the surfaces till smooth finish etc complete all as directed.
M&L for preparation of newly plastered surfaces of walls applying two coats of oil emulsion distemper etc complete all as directed.
Complete removal of existing treatment on surfaces of walls, removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etc,and applying two coats of oil emulsion distemper over one coat of primer complete all as specified and as directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
M&L for preparation of surface of wall and applying two coat of exterior weather proof (on putty surface)100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total)
M & L for provide 15mm thick internal plaster with ready mix plaster on AAC block/Brick Masonry (Makes/brand- ACC’s “ACCOPLAST”/ CK Birla’s “AEROCEN” / Magic Plast /Speed Dry Mix’s “ ECO PLASTER”complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed.
M & L for preparation of old steel surfaces exc 10 cm width/girth and applying one coats of synthethic enamel paint etc complete all as directed.
M & L for preparation of new or previously untreated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthethic enamel paint over a coat of red oxide, zinc chrome primer etc complete all as directed.
M & L for preparation of old painted wood surfaces of any description over 10cm in girth or width & applying one coat of synthetic enamel paint etc complete all as directed.
M & L for preparation of new or previously untreated wood Surfaces of any description, not otherwise described,over 10cm width or girthh & applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as directed.
M & L for preparation of previously untreated stone surfaces/ complete removal of existing treatment on surfaces of walls, removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etcof any description over 10cm in girth or width & applying two coat of synthetic enamel paint over a coat of primer etc complete all as directed. (NOTE: surface/boarder is applied different color and measured as one unit )
M & L for preparation of previously untreated stone Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint & applying two coat of synthetic enamel paint over a coat of primer etc complete all as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length ,bent to shape rquired including cranking, bending spirally for hooping for columns & binding with and including mild steel wire (annealed )not less than 0.9 mm dia in reinforcement for man holes cover slabs etc complete all as specified and as directed..
M&L for reinforced cement concrete 1:2:4 type B1(20mm graded stone aggregate) nominal mix as in beams, seimic bands, cantilevers, bressumers and lintels etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.
M&L for formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers,lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc flat rough finished surfaces of concrete etc complete all as directed.
Dismentling asbestos cement ( corrugated , semi corrugated ) sheets in roof covering .
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.
M&L for Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Writing letter or figures (Block, Roman, Italic or Indian) n exec 30 cm high all as specified and directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets etc
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
Cement concrete type D2 1:3:6 (40 mm graded aggregate in foundations, filling and mass concrete
Supply only chain link MS galvanised fencing any size or type
Fixing only chain link fencing including line wires, any mesh, size and type of standard, rails, straining bolts,etc. including provision of binding wire.
S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.
Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.
M &L for providing 50 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) Finishing cement concrete surface even and smooth using extra cement for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed . Note: Water Proofing compound shall be measured and paid separately.
M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .
Supply only water proofing compund as specified and directed.
M & L for Providing precast ce- ment concrete Type C1(1;3;6) 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work)
S&F for 40 to 50 mm thick precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)
M & L in repairs Bird proofing mesh made of Anty Bird Net UV black/blue colour as approved by Engineer-in Charge made of material Polyolefin all weather-proof Co-polymer of machines knotting using CNC machine with DSLS technology for anti slip knotting, heat setting should be steam set for greater dimensional stability and knot firmness and diameterof the twine is 1mm and the size of mesh 25x25mm (+)/(-) 2mm and should achieve twine breaking strength of 16 Kgf (160N) minimum and MBS (mesh breaking strength) 12 Kgf (120N) and KBS (Knot breaking strength) 22 Kgf (220N) minimum fixed complete all as per manufacturers instructions complete on trusses. Bird proofing arrangement shall fixed/tied to truss members with nylon wire as per manufacturers instructions & as per direction of Eng-in-Charge. Make - Leo Technova India or equaivalent approved.
S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.
S&F coloured powder coated (50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F coloured powder coated (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S & F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.
S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.
S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks
S&F in repair rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks
S&F in repair15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F in reapir 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F in reapir 25 mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.
S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.
S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.
S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.
S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .
S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repair made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan
M & L for15mm thick Artficial Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.
Note: Amount of sch of credit of Rs.50030/-will be deducted from total amount of BOQ.
shubham Enterprises
M/S YOGESH CONSTRUCTION
M/s. JBSR ENTERPRISES.
Alpha Construction
JEET CONSTRUCTIONS CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .