Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC FLAT NO 20 AMBEDKAR ROAD DEHU ROAD PUNE 412101 D 101 CESC INDEX NO D 101 HQ CESC PUNE | NA | NA | 412101 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.0 L+₹70,649.05 (2.12%)Rejected-Finance | L2 | Rejected-Finance Being Not L1 | |
| 3 | L3₹34.1 L+₹77,402.80 (2.32%)Rejected-Finance 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | L3 | Rejected-Finance Being Not L1 | |
| 4 | L4₹34.9 L+₹1.7 L (4.96%)Rejected-Finance | L4 | Rejected-Finance Being Not L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
12 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
ADDN / ALTN / IMPROVEMENT TO CERTAIN SMQs (P-176 TO P-197) AND BLDG NO P-422 AT AF STATION OJHAR
2023_MES_628532_1
8133/E8
Open Tender
Civil Works
Item Rate
335 days
OJHAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹76,000
Yes
23 Jan 2024
16 Nov 2023
14 Dec 2023
17 Nov 2023
12 Dec 2023
29 Nov 2023
Amount
Taking down old U/S steel windows/ventilators with frame exc 1.5 sqm in each witn shutters (without takinf off shutters from the frames)etc completed and as directed
S & F powder coated anodised aluminium sliding window with anodized aluminium frame of 3 track with size 92 mm x 32 mm x 1.3 mm thick 02 glass and 01 stainless steel wire mesh slidng shutters with necessary channels (top rail, bottom rail and style of size 40 mm x 18 mm x 1.10 mm thick) including glazing with tinted sheet glass panel 4.00 mm thick fitted with necessary jointing cleats, glazing clips, rubber packing, locking device used as handle also 01 no in each shutter powder coated aluminium beading, screws complete all as specified.
S/F Framed work such as grills of pattern/design as approved , gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc completed and as directed.
M/L for colored Marble work 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 10 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Green Marble type or equivalent as approved including moulding on exposed edges of marble etc complete and as directed
Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. coplete.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises
Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level)
M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate .
M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
All as per item no.9 above but as in skirting, dado, risers in steps including backing coat 10 mm thick in cement mortar 1:4 complete all as specified.
M&L for 10mm thick rendering in CM 1:4 as in backing coat to receive tile finish as in skirting and dados
M&L for glazed ceremic coloured tiles of size 450x300x7mm/*400x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles.
M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in lintel bands and roof bands
M&L for Form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc.
S&F TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel steel wire (annealed ) not less than 0.90 mm dia or seccuring with clips quility confirming to Deformed or twisted bars.
All as per item No 15 but 6 to 8 mm dia as in stirrups
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Demolition of brick work or stone masonary, built in cement mortar.
M&L for brickwork using old size bricks Sub class B straight or curved on plan exc 6m mean radius built in CM 1:6
M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth without using extra cement.
M&L for preparation of new plaster surface with two coat of OBD over a coat of primer complete all as specified and directed
Taking down Chowkats with shutters (Without taking off shutters) area exc 1.5 Sqm but not exc 4.00 Sqm
Cutting holes in but in brick walls built in cement mortar and stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exceeding half brick but not exceed one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)
M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints all as specified
S & F 35mm thick 2nd class hard wood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feathered edged) of of vennered particle board medium density wood partical board with commerical face veneers supplied and fitted to chowkats complete
S&F of II Class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); 35mm thick supplied and fitted to chowkats
M&L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.
S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.
S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised
S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
S & F 20 mm outer dia (internal 16mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete all as specified and directed
S & F Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe all as specified
S&F bib tap fancy type CP 15mm dia of pipe
S&F Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mmbore
S & F PVC connection 15mm dia 450 mm long with 2 Nos brass check nuts with washer etc complete all as specified by Engr-in-charge.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore
S & F in repair Cast iron floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantel materials complete all as specified and directed by Engineer-in-charge.
S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete.
S&F in repair SS waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.
Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
M&L for Granite (of any colour or any grains as approved) work with 16 to 18mm thick table rubbed and polished as in steps jambs , pillers , window cills, cooking platform and similar works including pointing in whice cement using 1:2 using marvel dust and admixture of pigments to match with the shede of grinate over and including 15mm thick screed bad in CM 1:6 for laying grinate all as specified and directed including taking down / dismanteling of existing plaster/ stone of any type. Note : Grinate shall be best quality and shall be provided one piece and width minimum 70mm in jambs except of cooking platform whicl shall be of full width as per site including full moulding of exposed edges with polishing. The back surface of grinate shll be made rough by sprinkeling small pebbles using adehesive for bonding with bedding layer.
M/S PRAMOD SURESHCHANDRA AHER
M/s M R MAHANA
shubham Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .