24/EE/C/BSNL/UPR/2023-24

Amount

Providing and fixing ISI Marked flush door shutters IS :2202 non decorative type ,core of block board construction with frame of 1st class hard wood and well match teak 3 ply veneering with vertical grains or cross band and face veneer on both face.

30 mm thick

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mmwidth out of which 50mm shall be flat and 20mm shall be tapered in 45degreeangle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel.10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm(5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification & drawing

30 mm thick plain PVC door shutters.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

Old work (one or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead all complete as per directions of EIC.

With cement mortar 1:4 ( 1 cement : 4 fine sand )

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge.

With float glass panes of 5.00 mm thickness

Providing and replacement of unservicable floor trap for making leakproof including cutting and making good floors/walls etc. by replacing PVC/ china vitreous trap with cement mortar 1:3 with neat cement after taking out grating from floor including demolishing of C.C. work and stacking of useful materials near the site and disposal of unserviceable materials to municipal dumps.

Providing Sewerman as and when required for attending complaints of drainage and sewerage works such as removal of choking of sewerline,gully traps and manholes of the quarters / buildings i/c cost of bamboo, phawra etc. (inclusive of cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.)

Providing Plumber as and when required for attending complaints of plumbing, sanitary installations, water supply fittings and related works complete excluding the cost of material except washers,nails,clamps,screws, M- seal, taplon tap , drill machine , bit etc. as per direction of Engineer-in-Charge. The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of 'supply of material' of the agreement.

Providing carpenter as and when required for attending all complaints of carpentry works such as repair of doors , windows , cupboard shutters as per requriment on need basis for all jobs in one working day i/c cost of screws ,nails, fevicol clamps etc. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid under sub head 'supply of material' of the agreement except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.

Providing Beldar/helper as and when required for attending maintenance job for carpentry,plumbing job and for other miscellaneous works such as cleaning the colonies compound, roof etc. including the cost of ledder, tagari, phawra etc.for all jobs in one working day.

P/ F red sand stone manhole cover/OH tank slab of approx. size 0.60 x0.90 m and 30 to 45 mm thick i/c cost of cutting in size, transportation and wastage etc.

Refixing of aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling etc i/c fixing with dash fasteners of required dia and size and fixing of available aluminium snap beading as directed by Engineer-in-charge.

Sliding door bolts bright finished or / Black enamelled including necessary screws & nuts and bolts:

Tower bolts (barrel type) including necessary screws

M.S handle for doors, windows etc. including bolts, nuts, screws and washers.

Hydraulic door closer sleek type M.S. body with necessary accessories and screws complete

Supply of wire gauge of 0.46mm dia and aperture 1.4mm for renewing of wiregauge of doors & window including new wooden beading of required size if required as per site conditions.

Supply of G.I. UNIONS.

15 mm nominal bore.

20 mm nominal bore.

25 mm nominal bore.

32 mm nominal bore.

50 mm nominal bore.

Supply of Flat back wash basin (Vitreous China)

Supply of P.V.C. waste pipe for sink and wash basin.

32 mm dia length not less than 700 mm.

Supply of FLUSHING CISTERN

PVC 10 litres capacity (low level) (white ) (with fittings, accessories and flush pipe of required size ) of Hindware , Cera or equivalent.

Supply of Unplasticised PVC connection pipe with brass union.

30 to 45 Cm. long, 15 mm bore.

Supply of C.P.brass pillar tap (of Wt not less than 650 gms.) 15mm dia.

Supply of Polyethylene water storage tank with cover and suitable locking arrangement.

Supply of Brass Bib cock.

15 mm dia.

Supply of Brass stop cock.

15 mm dia

Supply of PTMT Bib Cock /Stop Cock 15mm

Supply of PTMT Pillar Cock 15 mm

Supply of PTMT Ball Cock 15mm

Supply of PTMT Shower 15mm

Supply of STAINLESS STEEL /PTMT GRATING .

125 mm dia. Gratting with or without waste hole , including fixing in cement

Supply of PTMT waste coupling 32 mm

Supplying White plastic seat (solid) with lid C.P. brass hinges and rubber buffers for E/WC.

Supplying of C.I. or M.S. Bracket / fastener for wash basin and sinks

PVC coupler/socket for PVC drainage pipes 75 mm

PVC coupler/socket for PVC drainage pipes 110 mm

PVC single equal Tee (without door) 75x75x75 mm

PVC single equal Tee (without door) 110x110x110 mm

PVC bend 87.5° 75 mm bend

PVC bend 87.5° 110 mm bend

PVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe

75 mm dia

PVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe

size 110 mm dia

Supplying top pivot of Aluminium doors ISI marked best quality.

G.I. ELBOWS./Equal/ Reducers.

15 mm dia.

20mm dia

25 mm dia.

G.I.NIPPLES UP TO 230MM

15 mm dia.

20mm dia

25 mm dia.

G.I. PLUGS.

15 mm dia.

20 mm dia.

25mm dia

G.I. TEES (EQUAL/Reducing).

15 mm dia.

20 mm dia.

25mm dia

G.I. PIPE SOCKETS EQUAL/UNEQUAL( Higher dia to be measured)

15 mm dia.

20 mm dia.

25mm dia

C. P brass spreader for urinals

Brass full way valve with handle (Italian type handle valves of approved make)

15 mm dia.

20 mm dia.

25 mm dia.

40 mm dia.

50 mm dia.

Supplying unplasticised Rigid uPVC pipes of approved brand & manufacture.

20 mm diameter

25mm diameter

Supply of Upvc fittings 20 mm

Elbow 90 Degree

Coupler/Socket

Female Adapter (PVC Thread)

Male Adapter (PVC Thread)

Female Adapter (Brass Thread)

Male Adapter (Brass Thread)

uPVC Tee (Brass Thread)

Supply of Upvc fittings 25 mm

Elbow 90 Degree

Coupler/Socket

Female Adapter (PVC Thread)

Male Adapter (PVC Thread)

Female Adapter (Brass Thread)

Male Adapter (Brass Thread)

uPVC Tee (Brass Thread)

Unplasticised PVC connection pipe with brass union.

45 to 60 cm long for hot water & other appliances.

Supply of PVC over head tanks cover of standard dia and approved manufacture and as per requirment of specification etc.

Brass Spindle for Pillar Taps/bib cock/stop cock-15 mm nominal bore.

C. P brass long body bib cock of approved quality.

Towel rails CP pipe 600x20mm with brackets.

Supplying of GI/PTMT tank nipples of required dia 15 to 25mm for connecting the PVC tank as per requirements and approved quality.

Supplying of P.V.C. syphon set of approved make for maintenance of existing PVC 10litre flushing cisterns.

Supplying of 15mm dia CP brass hand operated shower with CP coil pipe for EWC of approved brand.

Supply of Kota stone Sink of 20mm thick kota stone approximate 600x450mm i/c bracket and 32 mm Cp brass waste

Supplying of 600x450 mm edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Credit of CP brass items

Credit of CI/GI/MS items

Credit of PVC/UPVC/CPVC items

Credit of Aluminium items

Credit of SCI items

Credit of Wooden doors received from dismanteling i/c fittings

Credit of Hydraulic door closer.