REPAIR AND MAINT OF GI/CI/DI PIPE LINE FOR CERTAIN AREA UNDER THE JURISDICTION OF GE (A) JAISALMER

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Removing excavated soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Taking up or down carefully steel water tubing and connection from any place of following sizes:-

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore.

80 mm bore.

100 mm bore.

Refixing of old steel water tubing and connections in new or old position (wall/floor/ceilling/trecheh etc) of following sizes:-

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore.

80 mm bore.

100 mm bore.

Supply and fix complete to walls / ceilings or laid in floors/trenches steel water tubing galvanised medium grade with all fittings of following sizes:-

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore.

80 mm bore.

100 mm bore.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of following sizes complete all as specified & directed by Engineer-in-Charge

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore.

80 mm bore.

100 mm bore.

S&F in repair gun metel, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the follwing sizes with ISI marked and as per IS 14846 complete all as specified & directed by Engineer-in-charge

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore.

80 mm bore.

S & F in repair butterfly valve, high pressure with crutch or butterfly handle for iron pipe or for unions of follwing sizes complete all as specified & directed by Engineer-in-charge

80 mm bore.

100 mm bore.

S&F mechanical/ Detachable/ Victaulic joints (class 10) with nut bolts washers rubber gaskets etc suitable for CI/DI pipes including taking down unserviceable joints of following sizes:-

80/100 mm bore.

150/200 mm bore.

250 mm bore.

Supply and fix Sluice valve PN-1.6 with gun metal spindle and wedge nut ISI maked (IS-14846:2000) complete with iron wheel including taking down old unserviceable sluice valve of following sizes:- Note:- Rate includes neccesary arrangements and cutting the pipe of required dimension with attachments for fitting the sluice valve.

80 mm bore.

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

M & L for taking out sluice valves refacing, regrinding and refixing alongwith rubber gasket complete of following sizes :-

80 mm bore.

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

M & L for taking out stainless steel spindle out of sluice valve and refixing it with new one with neccessay attachments to fit the existing valve complete for the following sizes :-

80 mm bore.

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

Taking up carefully from trenches/walls/pillar CI/DI water mains incl all fittings with spigot and socket joint/rubber gaskets/lead wool/tyton joint for the following sizes:-

80 mm bore.

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

Relaying, realigning the DI/CI pipe line with spigot and socket ends (in any length) on wall/pillars with necessary fitments (tyton joint/rubber gasket, etc) for complete assembly of following sizes complete all as specified & directed by Engineer-in-charge

80 mm bore.

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

Supply and laying ductile iron pipe with internal cement mortar lining and external zink pipes with class of pipe K-9 including taking down unserviceable pipe of following sizes:-

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

Supplying, fixing and testing of CI/DI pipe fitting for spigot socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing/ decreasing or double socket etc). Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs, for pipe upto 250mm bore all as specified & directed by Engineer-in-charge. Note:- Rate of cutting existing pipe for insertion of the fitting is included in the quoted rate.

M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation concrete, mass concrete etc complete all as specified & directed by Engineer-in-charge

M&L construction of valve chamber of size 120 x 120 x 120 cm (internal dimensions) with the following specifications :-

(i) 15cm thick PCC 1:4:8 type D-2 (using stone aggregate) as in foundation concrete. (ii) PCC solid block masonry 200mm thick using grade C-5 block in CM 1:6. (iii) Rendering 15mm thick in CM 1:4 finished even and fair. (iv) PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping. (v) 3mm thick MS sheet cover alongwith MS angle iron frame 40 x 40x6 mm duly embedded in coping concrete with necessary locking arrangement. (vi) Painting MS sheet cover and frame with two coats of synthetic enamel paint over a coat of red oxide primer. (NOTE : Excavation and earthwork shall be measured and paid seperately under respective items of Sch 'A')

M&L construction of valve chamber of size 90 x 90 x 100 cm (internal dimensions) with the following specifications :-

(i) 15cm thick PCC 1:4:8 type D-2 (using stone aggregate) as in foundation concrete. (ii) PCC solid block masonry 200mm thick using grade C-5 block in CM 1:6. (iii) Rendering 15mm thick in CM 1:4 finished even and fair. (iv) PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping. (v) 3mm thick MS sheet cover alongwith MS angle iron frame 40 x 40x6 mm duly embedded in coping concrete with necessary locking arrangement. (vi) Painting MS sheet cover and frame with two coats of synthetic enamel paint over a coat of red oxide primer. (NOTE : Excavation and earthwork shall be measured and paid seperately under respective items of Sch 'A')

S & F in repair foot valve cast iron assembly of following sizes:-

80 mm bore.

100 mm bore.

150 mm bore.

Supply and fix cast iron non return (reflux) valve both flanged ends in swing type design as per IS 5312 Part-1, PN-1.0 including taking down unserviceable valve of following sizes:-

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

M&L for cleaning of pump house/sub station,surrounding area by surface excavation upto 10 cm depth incl removing shrubs,grass,miniplants and other unwanted materials and levelling complete in soft/loose soil complete all as specified & directed by Engineer-in-charge.

M&L for earthing complete with copper plate 60×60cm×3.15mm thick electrode and 25×3mm copper strip as earthing lead, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level,connected by means of brazing at bolts, nuts, check nuts and washers of copper all as shown in electrical plate No. 3 connected to earthing test point including PCC 1:3:6, Type C-2 earth pit with RCC cover, MS funnel with GI watering pipe all as specified or indicated including testing on completion all as specified and directed by Engr-In-Charge.

[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground levl connected to galvanized iron strip 25 x 3 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete including PCC 1:3:6, Type C-2 earth pit with RCC cover, MS funnel with GI watering pipe all as specified and directed. (NOTE:-GI earth strip and protection pipe beyond 7.5m will be measured and paid separately)

[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

M&L for main earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthing etc of copper strip 25x3 mm complete all as specified & directed by Engineer-in-charge.

M&L for main earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthing etc of galvanised strip 25x4 mm complete all as specified & directed by Engineer-in-charge.

M & L for cutting of branches of tree of various length to keep a clear pump houses and depositioning the cut branches upto 50 mtr from pump house complete all as specified & directed by Engineer-in-charge.

M&L only for attending water supply complaints and rectifying the faults viz no water, water leakage, air lock, low pressure, over flow etc all necessary patty items like rubber gasket,grease, screws, GI tees, bends, elbow etc and tool required including excavation in any type of strata as per site requirement and making arrangement of electric/diesel pump/JCB/manual additional labour by caulking with pig lead/ lead wool/ tyton joint complete all as directed for following sizes:- Note:- Group of three complaints (max) at one location will be consider as one job. Complaint slip will printed and supplied by Contractor in prescribed format as specified by Engr-in-charge.

20 mm to 100 mm bore.

150 mm to 250 mm bore.

Supply, fixing and testing, cast iron air release valve with two air outlet and fixing in existing CI/ DI water supply mains complete including necessary cutting/ drilling inserting tee, nuts, bolts etc including taking out old air release valve complete of follwing sizes complete all as specified & directed by Engineer-in-charge.

M&L in repair for fixing MS leakage clamps 150 mm in width made out of 6 mm thick MS Sheet in shape and size duly drilled 2 holes in each side with necessary rubber insertion sheet of required size and MS bolt,nuts & washers incl. excavation/earth work in any type of strata and dewatering of line water for prevention of water leakage from pipeline all as specified and directed suitable for following sizes of CI/DI pipelines:-

80 mm bore.

100 mm bore.

150 mm bore.

200 mm bore.

250 mm bore.

M&L dewatering, cleaning of OH reseviors (by professional agency like Narmada water tank cleaners or equivalent) with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacum cleaners and disposal of the same to a safe distance including scrubing of internal surface by steel wire brush, removing the dirt completely using industrial vaccum cleaners and sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder including repair to vent pipes and providing wire mesh and clamps (to stop ingress of pigeons) complete and marking the date of cleaning by using synthetic enamel paint in white colour over black background and letters of height 40 mm height and 30 mm width complete all as directed including one coat of white wash on the internal surface complete all as specified and directed by Engineer-in-charge.

Item No. 35.00 Contd... Note: If the work is not done upto satisfaction level of concerned JE/AGE (E/M), the work will be redone upto required level without any extra cost. Neccessary tools and safety gears to be arranged by contractor without any extra cost. Labours safety shall be contractors responsiblity.

50000 Gallons

M&L dewatering, cleaning of UG sumps (by professional agency like Narmada water tank cleaners or equivalent) with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacum cleaners and disposal of the same to a safe distance including scrubing of internal surface by steel wire brush, removing the dirt completely using industrial vaccum cleaners and sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder including repair to vent pipes and providing wire mesh and clamps (to stop ingress of pigeons) complete and marking the date of cleaning by using synthetic enamel paint in white colour over black background and letters of height 40 mm height and 30 mm width complete all as directed including one coat of white wash on the internal surface complete all as specified and directed by Engineer-in-charge.

Item No. 36.00 Contd... Note: If the work is not done upto satisfaction level of concerned JE/AGE (E/M), the work will be redone upto required level without any extra cost. Neccessary tools and safety gears to be arranged by contractor without any extra cost. Labours safety shall be contractors responsiblity.

100000 Gallons

200000 Gallons

Static Water Tank 50,000 glns round type

M&L applying one coat of anticorrosive bituminiuos paint on existing paint over ladder of overhead tanks of any capacity upto 20 mtrs staging including preparation of surfaces complete all as specified & directed by Engineer-in-charge.

Repairing of ladders/part of ladder in OH Tanks with the help of Arc/Gas welding, cutting, beding etc and two coats of anti corrosivce bitumious paint over a coat of anti corrosive primer complete all as specified & directed by Engineer-in-charge.

S & F ultrasonic level transmitter IP 67, 8 meter range 2 wire with sensor material PVDF, aluminium housing PU painted, top mounting including bracket complete with panel comprising of SMPS NHP 24 DC, 3 Amps and MCB SPN and anything else required for making level sensor operational and provision for fixing 4 digit 7 segment LED display complete testing/calibration for indiacting water level inside OHT(any capacity)/UG sump(any capacity) etc including neccessary conversion display on LED display in Litres/Gallons including taking down unserviceable ultra sonic sensor complete all as specified and directed by Engineer-in-Charge. (Make :- SBEM (ultramate 136-ULT) or equivalent in Endress & Houser, Banner. Note: - Labours safety shall be contractors responsiblity including protective gears for OHR.

S & F 4 digit 7 segment LED display suitable for 230V AC complete fixing in panel for display of water level including taking down unserviceable LED display complete all as specified and directed by Engineer-in-charge. Make: Selec (PIC101A) or equivalent in L&T, Siemens,TC(C&S).

S& F 2 core 1.5 Sqmm copper conductor complete fixing /saddling/ laying in ground and connecting to level transmitter (OHT/UG sump) at any height including taking down unserviceable cable complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing paint on iron/steel surface etc, and apply two coats of synthetic enamel paint over 80 mm dia pipe/ channel plate including marking of flow direction complete all as specified and directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundation and support pedestal to pipe line including necessary form work complete all as specified and directed by Engineer-in-charge.

Material and labour for cross arms, bracing supports, clamps fabricated out of structural steel such as ISMC, angle iron, flat iron sections including hot galvanised nuts & bolts, washers for single and two pole structure welding, bending cold or hot, drilling holes for bolts, in any shape or size as specified and including of one under coat and finishing coat with aluminium paint over a coat of red oxide primer complete all as specified & directed by Engineer-in-charge.

Anil Builders

Siddharth Constructions