PROVN OF AUDIO AND VIDEO SYSTEM FOR AUDITORIUM CUM CINEMA HALL AT MIL STN JAISLAMER (JOB NO SC/MW/1273)

Amount

Supply, installation of Speaker 3 Way Crossover 3 way, triamp LF: 800 w AES / 1000 w program; 101 dB, 4 Ohm; MF+HF: 250 watt AES / 400 watt program, 107 dB, 16 Ohm; HF: 85 watt AES / 170 watt program, 115 dB, 8 Ohm, Enclosure - LF: Highly braced particle board & MDF; M/HF Horn: Moulded FRP, Transducer complements: hf - 1 x 1.5" horn loaded, Transducer complements: mf - 2 x 6.5" horn loaded, Transducer complements: lf - 2 x 15", Nominal coverage - H 90° x V -30°/+20°, Nominal impedance - LF: 4 Ohm, MF+HF: 8 Ohm, Sensitivity (1 w 1m) - LF: 101dB; MF + HF: 103dB, Frequency range - 40 Hz ~ 17 kHz (-3 dB); 30 Hz ~ 18.5 kHz (-10 dB), Power handling program - LF: 2400W; MF+HF: 500W, Crossover frequency - 400 Hz (active); 1.3 kHz (passive), Inputs - Screw type barrier strip, Continuous power handling - LF: 1200W; MF + HF: 250W, Colours - Black complete all as specified and directed Make: Sonodyne/JBL/Boch(Electrovoice)/Pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of Surround speaker 2 way, passive, 200 watt AES / 400 watt program, 95 dB, 8 Ohm, Description - Cinema surround, Enclosure - Injection moulded industrial grade plastic, Low frequency transducer nominal diameter - 250mm (10”), High freq transducer nominal diameter - 25mm (1”) exit compression driver, Downward firing angle - Nominal 20° when mounted ush on back panel, Nominal coverage - 100° x 90°, Nominal impedance - 8Ω, Sensitivity (1 w 1m) - 95dB-SPL halfspace/wall-mounted, Frequency range - 50Hz ~ 18kHz (-10dB), Continuous power handling - 200W, Program power - 400W, Inputs connections - Binding posts, Colours - Black, Dimensions (hxwxd) mm - 457 x 260, complete all as specified and directed Make: Sonodyne/JBL/Boch (Electrovoice)/Pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of 2 x 18" Subwoofer with 5" VC, 2600 watt AES, 5200 watt program, 4 Ohm, front firing, Enclosurematerial - 18mm Plywood, Enclosure shape -Rectangular, Hf transducer -size: 2 x 18" voice coil: 5", Max spl -continuous: 134dB PEAK: 140dB, Nominal impedance -4Ω, Sensitivity (1 w 1m) -100dB, Frequency response -40Hz ~ Crossover freq (-3dB), Frequency range -30Hz ~ Crossover freq (-10dB), Power handling - continuous: 2600W program: 5200W, Connectors -1 x Twist-lock connector (input) 1 x Twist-lock connector (link), Crossover frequency -Recommended: 80 ~ 120Hz, 18 ~ 24dB/ oct low-pass, Recommended subsonic filter - 35Hz, 24dB/octave, Finish -Durable Paint, Grille - Powder coated 18 gauge perforated steel, Dimensions (hxwxd) mm - 574 x 1205 x 681, Net weight - 92kg complete all as specified and directed Make: Sonodyne/JBL/Bose/Pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of Speaker 10" LF with 2" VC, HF with 1" VC, 200 watt AES, 400 watt program, 8 Ohm, Enclosure material -15mm plywood, enclosure shape - wedge, with one 45° face, hf transducer - Size: 1" voice coil: 1.1", Lf transducer - Size: 10" voice coil: 2", Max spl -Continuous: 117db peak: 123db, Nominal impedance - 8Ω, Sensitivity (1 w 1m) - 94db, Frequency response - 60hz ~ 20khz (-3db), Frequency range - 50hz ~ 22khz (-10db), Hf directivity - 90° x 50°, Power handling - Continuous: 200w program: 400w, Connectors - 1 x twist-lock connector (input) 1 x twist-lock connector (link), Crossover frequency - 1.5khz, Recommended subsonic filter - 55hz, 24db/octave, Finish - Durable paint, Grille - Powder coated 18 gauge perforated steel, Dimensions (hxwxd) mm - 517 x 320 x 350, Net weight - 14.5kg complete all as specified and directed Make: Sonodyne/ JBL/Bose/Pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of dual 12" line array, 1000 watt, 8 Ohm, Passive 2 Way, 2 x 12” , vented , 2 x 12”, 3”, 500W x 2, 1 x 1.4”, 2.5”, 110W, 8Ω, 50hz ~ 20kHz, 1.4 kHz, 100° x 15°, 100 dB, 130 dB, 1000W, 2000W, 2 x Twist-lock connector (input), 1 x Twist-lock connector (link), Standard bracket for flying, with vertical tilting arrangement, Durable Paint, Trapezoidal, 18mm Plywood, Powder coated 18 guage perforated steel (Line array 03 Nos consisting set of 4 speakers each) complete all as specified and directed. Make: Sonodyne/JBL/Bose/Pulz or equivalent makes as approved by the Accepting officer.

M&L for Truss head for SJX 1212 including bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under cost and one finishing coat of paint complete all as specified and directed.

Supply, installation of Class H Power Amplifier 2600 x 2, 4 Ohm, 2 Ohm operation, No. Of channels – 2, Output power per channel - 8Ω: 1500W, 4Ω: 2250W, 2Ω: 2550W , 8Ω Bridged: 4500W ,4Ω Bridged: 5550W, Thd at rated power - 0.1% or less, Damping factor - >300, Signal to noise ratio (20hz ~ 20khz) - 107dB, Output circuitry - H, Frequency response - 20Hz~20kHz, ±0.5dB, Input connectors each channel -XLR with link, Output connectors each channel - Speakon, 1/4" and binding post, Amplifier and load protection - Short circuit, output DC, overheat, RF, internal fault, input overload, high frequency overload, mismatched load, mains inrush current, Front panel controls and indicators - Clip/Protect indicators, 6 step vol control indicator, 21 detent vol level control, Rear panel controls - 3 DIP switches for stereo, parallel, bridge mode. 2 DIP switches for 0.775V and 1V Sensitivity, Input power (as per BIS IS616:2017 IEC60065:2014/IEC62368- 1 - 600W, Dimensions (wxhxd) mm - 483 x 457 x 88, Net weight - 17kg, Agency approvals - CE, BIS (IS616:2010) complete all as specified and directed. Make: Sonodyne/JBL/Bose or equivalent makes as approved by the Accepting officer.

Supply, installation of Class H Power Amplifier 600 x 4, 4 Ohm, No. Of channels - 4, Output power per channel - 8Ω: 400W, 4Ω: 600W , 8Ω BRIDGED: 1800W, Thd at rated power - 0.1% or less, Damping factor - >300, Signal to noise ratio (20hz ~ 20khz) - 101dB, Output circuitry - AB, Frequency response - 20Hz~20kHz, ±0.5dB, Input connectors each channel - XLR with link, Output connectors each channel - Speakon, 1/4" and binding post, Amplifier and load protection - Short circuit, output DC, overheat, RF, internal fault, input overload, high frequency overload, mismatched load, mains inrush current, Front panel controls and indicators - Clip/Protect indicators, 6 step vol control indicator, 21 detent vol level control, Rear panel controls - 3 DIP switches for stereo, parallel, bridge mode. 2 DIP switches for 0.775V and 1V Sensitivity, Dimensions (wxhxd) mm - 483 x 457 x 88, Net weight - 23kg, Agency approvals - CE, BIS (IS616:2010) complete all as specified and directed. Make: Sonodyne/JBL/Bose/pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of Class AB Power Amplifier 600 x 2, 4 Ohm, 2 Ohm operation, Output power per channel 2 - 8Ω: 400W, 4Ω: 600W, 2Ω: 680W, 8Ω Bridged: 1200W, 4Ω Bridged: 1450W, Thd at rated power - 0.1% or less, Damping factor - >300, Signal to noise ratio (20hz ~ 20khz) - 101dB, Output circuitry - AB, Frequency response - 20Hz~20kHz, ±0.5dB, Input connectors each channel - XLR with link, Output connectors each channel - Speakon, 1/4" and binding post, Amplifier and load protection - Short circuit, output DC, overheat, RF, internal fault, input overload, high frequency overload, mismatched load, mains inrush current, Front panel controls and indicators - Clip/Protect indicators, 6 step vol control indicator, 21 detent vol level control, Rear panel controls - 3 DIP switches for stereo, parallel, bridge mode. 2 DIP switches for 0.775V and 1V Sensitivity, Dimensions (wxhxd) mm - 483 x 457 x 88, Net weight - 19kg, Agency approvals - CE, BIS (IS616:2010) complete all as specified and directed. Make: Sonodyne/JBL/Bose/pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of Class H Power Amplifier 1200 x 2, 4 Ohm, 2 ohm operation, No. Of channels - 2, Output power per channel - 8Ω: 800W , 4Ω: 1200W , 2Ω: 13600W , 8Ω bridged: 2400W, 4Ω bridged: 3000W, Thd at rated power - 0.1% or less, Damping factor - >300, Signal to noise ratio (20hz ~ 20khz) - 104dB, Output circuitry - H, Frequency response - 20Hz~20kHz, ±0.5dB, Input connectors each channel - XLR with link, Output connectors each channel - Speakon, 1/4" and binding post, Amplifier and load protection - Short circuit, output DC, overheat, RF, internal fault, input overload, high frequency overload, mismatched load, mains inrush current, Front panel controls and indicators - Clip/Protect indicators, 6 step vol control indicator, 21 detent vol level control, Rear panel controls - 3 DIP switches for stereo, parallel, bridge mode. 2 DIP switches for 0.775V and 1V Sensitivity, Dimensions (wxhxd) mm -483 x 457 x 88, Net weight -23kg, Agency approvals - CE, BIS (IS616:2010) complete all as specified and directed. Make: Sonodyne/JBL/Bose/pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of 16 channel mixer with 12 mic/line, 2 stereo line, 4 aux, 2 subgroup, graphic EQ, DSP effects, mp3, BT, mp3 recording Frequency response - 10Hz ~ 90kHz (+0, -1dB), Input: mono (mic/line) – 12, Input: stereo – 2, Output: main – 2, Output: aux – 4, Output: group – 2, Graphic eq - 9 band stereo, Eq: high - Gain: +15dB/ -15dB, Frequency: 12kHz shelving, Eq: mid - Gain: +15dB/-15dB, Frequency: Mono: 100kHz ~ 3kHz peaking, Stereo 3kHz peaking, Eq: low - Gain: +15dB/ -15dB, Frequency: 80Hz shelving, Effects - 99 effects, DSP based, Signal to noise ratio - 110dB, A- weighted, Thd - 0.004% A- weighted, Bt playback – Yes, Usb playback – Yes, Record to usb – Yes, Faders - 60mm, Phantom power - Per mic channel/ Global, Other features per channel - Mute, solo, low-cut and bus assign, switches (Main, Sub), Mic in, 50 ohm source res -133dB, Dimensions (hxwxd) mm - 150 x 620 x 475, Power consumption - 230V AC 50Hz, Power requirement - 55W complete all as specified and directed. Make: Sonodyne/JBL/Bose/pulz or equivalent makes as approved by the Accepting officer.

Supply, installation of (Stage monitor) Biamped : rms: 350, program 700 watt, 15” LF + HLCD Enclosure - Plastic, Transducer complements: hf - 1" HLCD with 1.75" VC, Transducer complements: lf - 15" with 3" VC, Amplifier power - 350W (275W + 75W), Amplifier power program - 700W, Max spl - 128dB, Frequency response - 55Hz ~ 17kHz (-3dB), Frequency range - 47Hz ~ 19kHz (-10dB), Directivity (hf h x v) - 90° x 50° (HF HxV), Crossover frequency - 1.8kHz, Inputs - Balanced mic: 1; Balanced line: 1; Balanced Mix Out: 1, Controls - Level controls: Line, Mic, Master; Bass, Treble, Bt version - Version 4.2, Dimensions (hxwxd) mm - 685 x 470 x 385, Usb sd card - Support WMA, WAV, mp3 files; Controls: Play / Pause, Stop, Repeat, Next , Previous, Net weight - 21.3kg, Mounting options - Pole mount, floor monitor complete all as specified and directed. Make: Sonodyne/JBL/Bose or equivalent makes as approved by the Accepting officer.

Supply, installation of Digital Cinema Processor Including Switcher, 11.2 channel XLR pre-out: 11.2 channel RCA pre-out, supporting, Dolby Atmos, 8 HDMI inputs with full HDCP 2.3 support; 3 HDMI outputs, Dynamic HDR and Quick Media Switching (QMS), Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM) and Quick Frame Transport (QFT), Built-in Wi-Fi with 2.4GHz/5GHz dual band support complete all as specified and directed. Make: Marantz Model No. AV7706 or equivalent in JBL/EMOTIVA or equivalent makes as approved by the Accepting officer.

Digital Signal Processor : DSP with 8 mono analog inputs (mic/line), 2 stereo inputs (line) ; 8 line-level analog mono outputs ; 16 digital Inputs/outputs via YDIF ; 64ch Dante digital Input/Output ; DSP Features like AEC (Acoustic Echo Canceller) ; Matrix Routing , Feedback Suppressor, Auto Gain Control, Priority Ducker function , Combiner ; Ambient Noise Compensator ,Speaker EQ , Paramtric & Graphic EQ ; Delay ,Limiter, Routing ; speech privacy ; Sampling Frequency Rate : 48kHz ; Frequency response :20Hz to 20kHz ; Dynamic range : 107dB ; Crosstalk : 100 dB ; Upto 50 Presets ; THD : Less than 0.05% ; Phantom Power : +48V ; Control Ports : 16 x GPI Input , 8 x GPI Output (Open Collector) ; RS-232 for Third Party External Cotrol ; 1x MY Card slot ; SD Card Slot for playback of MP3/WAV files stored on an SD Memory Card ; Event Scheduler function complete with standard accessories. Make : Yamaha or equivalent makes as approved by the Accepting officer.

Supply of Digital Wireless Handheld Microphone: Automatic frequency and interference management speech optimized automatics and sound profiles. Clear and easy focused user interface with OLED/LCD/LED display, Ethernet connectivity, Media control protocol integration, secure 256 bit AES encryption, Remote controllable, Quick setup pairing process. SL handheld condenser microphone capsule, clear and easy focused user interface, Long operation time (up to 15 hours), Remote controllable, with software complete all as specified and directed. Make: SENNHEISER /JBL/SHURE/AHUJA or equivalent makes as approved by the Accepting officer.

Supply of digital Wireless Collar Microphone: Automatic frequency and interference management speech optimized automatics and sound profiles. Clear and easy focused user interface with OLED display, Ethernet connectivity, Media control protocol integration, secure 256 bit AES encryption, Remote controllable, Quick setup pairing process. Lackable 3.5 mm jack socket, clear and easy focused user interface, complete all as specified and directed. Make : SENNHEISER /JBL/SHURE/AHUJA or equivalent makes as approved by the Accepting officer.

Supply, installation of Corded Vocal Microphone with Dynamic neodymiun magnet based microphone element with frequency response of 80Hz- 16kHz or better,sensitivity of>= 2.2 mV/Pa ,rated impedence of 600 ohm. Including mic stand with base in respect to approved makes complete etc as reqd. complete all as specified and directed. Make : SENNHEISER /JBL/SHURE/AHUJA or equivalent makes as approved by the Accepting officer.

Supply, Installation, Testing & Commisioning of Projector-16,000 LUMENS, 3 LCD Laser Light source projector with HDMI X 1, DIVI X 1, VGA X 1, SDI IN X 1, RS232, IN/Out X 1, RJ45 X 1, Digital Link (HD Base-T) X 1, USB X 1, Remote IN/Out X 1, Remote IN/Out x 1, 1920 x 1200 pixels Resolution, Screen size (diagonal) 2.03–12.7 m (80–500 in), 16:10 aspect ratio, 85 % Center-to-corner zone ratio*1, Terminals supporting SDI In, HDMI In, DVI-D In, RGB In, Serial/Multi Projector sync In, Serial/Multi Projector sync Out, Digital link, LAN, DC Out, AC 100-240V, 50/60 Hz Power Supply, 38 dB (NORMAL) / 32 dB (Quiet) Operation noise, 360 deg Installation, portrait installation, Gemometric correction, Auto screen adjustment software compatible. Auto screen adjustment software compatible complete all as specified and directed. Model No: MZ16KLBD of Panasonic & equivalent in Barco, Digital Projection,NEC/LG Note : Projector Lens will be measured and paid seperately under relevant item of schedule

Supply, Installation of lens compatible for Item ser No. 19.00 above projector complete accessories with specifications F value - 1.75-2.17, Focal distance (f) - 1.35-2.10:1 (16:10 aspect ratio), 1.35-2.10:1 (16:9 aspect ratio), 1.62-2.50:1 (4:3 aspect ratio) AC 100–240 V, 50/60 Hz Power Supply all as specified and directed. Model No: ET-EMS600 of Panasonic & equivalent in Barco,Digital Projection,NEC/LG or equivalent makes as approved by the Accepting officer.

Supply, Installation of 24 U Rack complete all as specified and directed. Make : Valrack/D-link/Comrack or equivalent makes as approved by the Accepting officer.

M&L for Cabling of interconnection of Equipment (i.e., Cabling included from projector to cinema processor, Amplifier to Controller or any other cable for making system operational inside and Cable should be of High-Quality audio cables as per site requirement) in Projector Room Only complete all as specified and directed.

Designing, Commisssioning, Testing for Audio / Video System complete all as specified and directed by the Engineer-in-Charge.

Note for Audio / Video Sytem:- All minor necessary items which are required to make the Audio & Video system complete functionable on ground are deemed to be included in the quoted rates by the bidder. All necessary testing, commissioining are deemed to be included in the quoted rate of respective items. Nothing extra shall be payble on this account.

SAKSHAM BUILDERS AND ENGINEERS

UTSAV INDIA LIMITED

MANGLA AMIT BUILDERS PVT LTD

Jeet Construction

SHIVA CONSTRUCTION COMPANY

FRIZO INDIA PVT LTD

SOOD ASSOCIATES PVT LTD