Loading
Loading…
Loading…
Tender Value
₹8.8 Cr
EMD Value
₹17.6 L
Closing Date
12 Jun 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Definition Of Similar Work : - Any Civil engineering work comprising of Supplying/laying /Fixing of pipeline for any purpose i.e, Water/Oil/Gas.
27 conditions · 4 needing a document upload
Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. Annexure Description 1. Annexure-I(a) Details of the Works Completed by the Tenderer during the last seven years to be filled & submitted as per Annexure-I(a). 2. Annexure-I(b) Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled & submitted in Annexure-I(b). 3 Annexure-II Details of Plants and Machinery with the Tenderer to be filled & submitted as per Annexure- II. 4 Annexure-III Details of Personnel and Organization of the Tenderer to be filled & submitted as per Annexure-III. 5 Annexure-IV Details of Works Presently on hand of the Tenderer to be filled & submitted as per Annexure- IV. 6 Annexure-V Details regarding Association of Railway Officer(s) with the tenderer to be filled & submitted as per Annexure- V. 7 Annexure-VI List of the Arbitration Cases of the Tenderer during last five years to be filled & submitted as per Annexure-VI. 8 Annexure-VII List of the Court Cases of the Tenderer during last Five years to be filled & submitted in Annexure- VII. 9 Annexure- VIII NEFT MANDATE FORM. All Payments to the agency (including the refund of the Bid Security of the unsuccessful bidder preferably) will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure- VIII. 10 Annexure-IX GST COMPLAINT INVOICE : To be filled & submitted as per Annexure-IX. 11 Annexure-X FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS as per Annexure-X. 12. Annexure-X(A)-This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. 13. Annexure-XI LETTER OF CREDIT: To be filled & submitted as per Annexure-XI. 14.Annexure-XII BID SECURITY: Bank Guarantee Bond from any scheduled commercial bank of India to be filled & submitted as per Annexure-XII. 15.Annexure-XIII Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) to be filled & submitted as per Annexure-XIII. 16. Annexure- XIV TENDER FORM (FIRST SHEET)- Tender Form (First Sheet) to be filled & submitted as per Annexure-XIV. 17.Annexure-XV TENDERER'S CREDENTIALS (BID CAPACITY) to be submitted as per Annexure-XV. (This annexure will be applicable, if tender having advertised value more than Rs 10 crore wherein eligibility criteria includes bid capacity)
Annual contractual turnover :- Each Bidder or each member of a JV must fill details of Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) in annexure-XIII form separately and submit the same with the offer followed by the guidelines as mentioned in this annexure. The format of Annexure-XIII ( Ref-Annexure-VIB of GCC-2022) is available in commercial compliance Annexure in documents section of this tender.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT , etc. are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII,IX,XI, XII, XIII, XIV. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Open tender for Additional boring & water pipeline connection from Ajay river to Jasidih station & other related misc. works.
O-AC-T-36-26-27
O-AC-T-36-26-27
Open
Works - General
12 Months
Paschim Bardhaman, West Bengal
₹0
₹17.6 L
12 Jun 2026
21 May 2026
29 May 2026
143 items across 2 schedules · ₹96,55,865.15 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply, Laying, fittings and fixing of 250 mm x 7 mm MS Pipe | Metre | 50.00 | 7,131.28 | 3,56,564 |
| 2 | Supply, fittings and fixing of 250 mm x 7 mm MS Pipe Slotting ( Filter) | Metre | 70.00 | 7,228.96 | 5,06,027.2 |
| 3 | Supply, fittings and fixing of 100 mm GI Flange | Each | 150.00 | 498.21 | 74,731.5 |
| 4 | Supply, Fittings and fixing of 100 mm GI Bend | Each | 25.00 | 1,514.17 | 37,854.25 |
| 5 | Supply, Fittings and fixing of 100 mm x 12" GI Nipple | Each | 25.00 | 781.51 | 19,537.75 |
| 6 | Supply, Fittings and fixing of 100 mm x 150 mm GI Nipple | Each | 20.00 | 420.06 | 8,401.2 |
| 7 | Supply, Fittings and fixing of 100 mm x 12" MS Nipple | Each | 20.00 | 429.83 | 8,596.6 |
| 8 | Supply, Fittings and fixing of 100 mm x 80mm GI Reducer | Each | 10.00 | 1,045.27 | 10,452.7 |
| 9 | Supply, Fittings and fixing of 50 mm GI Cyma Socket | Each | 150.00 | 253.99 | 38,098.5 |
| 10 | Supply, Fittings and fixing of 50 mm GI Elbow | Each | 40.00 | 170.96 | 6,838.4 |
| 11 | Supply, Fittings and fixing of 50 mm x 150 mm GI Nipple | Each | 250.00 | 131.88 | 32,970 |
| 12 | Supply, Fittings and fixing of 1/2" x 2" Nut Bolts washers | Kg | 250.00 | 151.42 | 37,855 |
| 13 | Supply, Fittings and fixing of 100 mm Rubber Sheet | Each | 600.00 | 29.31 | 17,586 |
| 14 | Supply, Welding, Fittings and fixing of 250 mm MS Ring as per site requirement | Each | 70.00 | 1,856.09 | 1,29,926.3 |
| 15 | Supply, Fittings and fixing of 80 mm x 225 mm Long Nipple (one side Thread and one side Flange ) | Each | 10.00 | 908.5 | 9,085 |
| 16 | Supply, Laying, fittings and fixing of 80 mm x 150 mm Long DF GI Pipe | Each | 20.00 | 4,835.59 | 96,711.8 |
| 17 | Supply, Fittings and fixing of 80 mm S & F Well Cover With Sand Protection | Each | 10.00 | 439.6 | 4,396 |
| 18 | Supply, Fittings and fixing of 80 mm Top Clamp | Pair | 15.00 | 2,686.44 | 40,296.6 |
| 19 | Supply, Fittings and fixing of 80 mm x 90 Deg CI Bend D/F | Pair | 15.00 | 2,881.82 | 43,227.3 |
| 20 | Supply, Fittings and fixing of 80 mm Heavy Duity NRV (H) ISI | Each | 10.00 | 10,159.62 | 1,01,596.2 |
| 21 | Supply, Fittings and fixing of 80 mm x 80 mm Tee A/F | Each | 10.00 | 4,737.9 | 47,379 |
| 22 | Supply, Laying of 2 mm to 5 mm gravel | cum | 10.00 | 1,416.49 | 14,164.9 |
| 23 | Supply, Fittings and fixing the MS Panel Base for hanging the panel on the Pump room wall. | Numbers | 8.00 | 3,028.35 | 24,226.8 |
| 24 | Complete welding charges of pipes, cage, electrical panel base etc. | Job | 8.00 | 16,118.64 | 1,28,949.12 |
| 25 | Charges for covering the borewell with approved chemical Powder etc required for Boring the borewell as per site requirment. | Job | 8.00 | 7,326.65 | 58,613.2 |
| 26 | Labour Charges for 65 mm Trial Boring on river bed to ascertain the depth of the sand and water, until the proper water level as per our useal practice. | Job | 20.00 | 17,095.52 | 3,41,910.4 |
| 27 | Labour Charges for 250 mm Boring on river bed for sinking and Lowering tube well and assembling complete in all complete. | Job | 10.00 | 82,546.95 | 8,25,469.5 |
| 28 | Labour Charges for cleaning the bore well through air pressure by air compressure as per our useal practice. | Job | 20.00 | 8,303.54 | 1,66,070.8 |
| 29 | Charges for all tools, plants and equipment for complete the job. | LS per site office | 8.00 | 17,583.97 | 1,40,671.76 |
| 30 | Providing and fixing C.I. double acting air valve of approved quality with bolts,nuts,rubber insertions, lead pigging etc. complete of dia 300 mm. | Each | 20.00 | 40,345.43 | 8,06,908.6 |
| 31 | Carrying out resistivity survey conduction, geographical survey for cach VES, scanning a depth of 150 mts. BGL to delicated sub - surfclithology adopting electrical method of geophysical survey for cach driling point. Minimum 10 nos. of vertical electrical sounding including conducting hydrolgical investigation, adopting suitable area so that the recommendation of the best on the basis of 10points of drilling for ground water and submitting report from the recognized Govt. approved institution or firm to the Railway authority. | Job | 2.00 | 40,647 | 81,294 |
| 32 | Supplying, erecting, fabricating, hoisting, fitting, fixing in position of GPR/SMC paneled water storage tank above 11m height staging to be provided by Railway having total capacity 50 kL (approx.) as per IS: 14399. The rate includes all fasteners, UPVC inside support, PVC/Stainless steel inside ladder, HDG outside bracing, FRP manhole cover, Aluminium/FRP external ladder, PVC ventilator complete in all respect. The tank should have factory fitted provision for inlet, outlet, overflow wash pipe and provision for one additional delivey pipe line in future of dia as specified by engineer at site. The work complete in all respect with contractor's tools, plants, labour, materials, scaffolding and removing the same after completion of work. The final payment shall be released only after tank is tested as leak proof. | Litre | 20000.00 | 18.52 | 3,70,400 |
| 33 | Laying of 700mm internal dia & 10mm thk. Wall welded M.S. casing pipe by Jack Pushing method of trenchless technology under earth and across railway track without disturbing train movement | Metre | 60.00 | 20,083.14 | 12,04,988.4 |
| 34 | Laying of 300mm internal dia & 10mm th. M.S. pipe Through cashing pipe. The rate include cost of welding of pipe joint tools, & plants, labour, etc. complete in all respect as per direction of Engineerr in charge. | Metre | 66.00 | 2,095.24 | 1,38,285.84 |
| 35 | Supply of 700 mm internal dia 10mm th. M.S. pipe.The rate include cost of transportation, loading & unloading at site as per direction of Engineer in charge. | Metre | 55.00 | 28,866.17 | 15,87,639.35 |
| 36 | Supply of 300mm internal dia 10mm th M.S. Pipe.The rate include cost of transportation, loading & unloading at site as per direction of Engineer in charge. | Metre | 60.00 | 12,767.86 | 7,66,071.6 |
| 37 | Supply of 300mm internal dia 10mm th M.S. Pipe.The rate include cost of transportation, loading & unloading at site as per direction of Engineer in charge. | Each | 2.00 | 7,219.02 | 14,438.04 |
| 38 | Supplying Applying 8mm thick wrapping coating complete in all respect | Sqm | 60.00 | 475.43 | 28,525.8 |
| 39 | Painting with black anti corrosive bitumastic paint of approved brand two coats on M.S. casing pipe complete in all respect. | Sqm | 100.00 | 65.64 | 6,564 |
| 40 | Making thrust bed trench by earth cutting manually of size 9.0 m x 3.0 m x 6.5 m (Depth max) in connection with jack work will be done day and night | Job | 1.00 | 4,22,973.31 | 4,22,973.31 |
| 41 | Making receiving bed trench by earth cutting manually of size 3.0 m x 2.10 mx 6.5 m | Job | 1.00 | 1,81,975.63 | 1,81,975.63 |
| 42 | Preparation and submission of design and drawing of water pumping main- Ajay River to JSME station. | Job | 1.00 | 4,95,000 | 4,95,000 |
| 43 | Providing and laying GI pipe 150mm dia below running track during traffic block or besides running track during non traffic block with all necessary tools, plant & machinery | Metre | 60.00 | 3,709.88 | 2,22,592.8 |
| Schedule total | ₹96,55,865.15 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CheckList.pdf
ATTACHMENT
GCC-2022_2.pdf
ATTACHMENT
Tenderdocuments.pdf
ATTACHMENT
AnnexuresforCommercialcompliances.pdf
ATTACHMENT
JPOTelecomcircular9of2023_1.pdf
ATTACHMENT
ANNEXURE-X_A_.pdf
ATTACHMENT
Annexure-X_1.pdf
ATTACHMENT
Annexuresoftechnicalcompliancess.pdf
ATTACHMENT
ACSlipsGCC-2022.pdf
ATTACHMENT
Pdf SAMPLING TESTING PROVI etc
ATTACHMENT
PdfSAMPLINGTESTING-PROVIDINGSITELABORATORYFACILITIES.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .