MID/J/107(UT Capex)

Fabrication, Installation, Testing and Commissioning of new Gates by way of replacing damaged old ones installed on Kathua canal its distributaries D6,Patyari Minor, Jari minor Etc.

Cross Gate (6.7' X 5') near D5 at Kathua Canal Fabrication and installation of Cross Gate near distributary D-5 on main Kathua canal to regulate irrigation water by way of cutting the concrete structure over the groves of gate with the help of hammer and chisel for smooth extraction and lowering of gate. Dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure. Extracting out the damaged/ worn out gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of leaf structure of size 6.7 ft x 5 ft (approx.) using the ISMC75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC75 channel. Providing and welding the MS sheet of 6mm thickness on the frame of fabricated from MS channel. The Job also includes complete fabrication of outer frame MS structure of size (12' X 7') by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 250 of length 7.6 ft length each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and rain pipe along with base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint. (Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charges, labour charges, crane charges and testing for its smooth operation at site. Distributary D6 Gate (5' X 2.5') at Kathua Canal Fabrication of distributary D6 gate on main Kathua canal to regulate irrigation water in D6 canal by way of dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure. Extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of vertical leaf structure of size 5 ft x 2.5ft (approx.) using the ISMC75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. The job also includes fabrication of outer MS frame structure of size (12 ft x 4ft) by MS channel of ISMC 125 consisting of groove channels, base channel and checking it for trouble free operation.Top hoisting channel consisting 2 number ISMC 125 of length of 4 ft each .Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size. Drilling of hole at the base ofstem rod for accommodating bolt to connect the leaf. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charges, labour charges, crane charges and testing for its smooth operation at site. Gate on Patyari Minor (3.5' X 3') at Kathua Canal Fabrication of gate on Patyari Minor on main Kathua canal to regulate irrigation water in Patyari Minor canal by way of dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure. Extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of vertical leaf structure of size 3.5 ft x 3ft (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. The job also includes fabrication of outer MS frame structure of size (10ft x 6ft) by MS channel of ISMC 125 consisting of groove channels, base channel and checking it for trouble free operation. Top hoisting channel consisting 2 number ISMC125 of length of 6 ft each. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size. Drilling of hole at the base of stem rod for accommodating bolt to connect the leaf. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation .Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charges, labour charges, crane charges and testing for its smooth operation at site. Gate (5.2’x5’) Bella Khul near Wajoo Nallah, Kathua Fabrication of gate on Bella Khul near wajoo nallah, kathua to regulate irrigation water in Bella Khul by way of installing a new gate by Fabrication of vertical leaf structure of size 5.2ft x 5ft (approx.) using the MS angle size of 50x50x5mm with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of MS angle size of 50x50x5mm. Providing and welding the MS sheet of 6mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. The job also includes fabrication of groove channels by welding the ISMC 75 of 4 ft length each side to existing groove channels in the canal, base channel and checking it for trouble free operation. Top hoisting channel consisting 2 number ISMC 100 of length of 6 ft each Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size. Drilling of hole at the base of stem rod for accommodating bolt to connect the leaf. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation .Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charges, labour charges, crane charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The firm shall offer rebate on old material

Rebate on Old Parts

AADISHWAR ELECTRICAL AND MECHANICAL WORKS (BID ID -2619807)

BEE AAR ENTERPRISES (BID ID -2617019)

Rishabh Electricals and Mechanical Works