Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC 127 OLD NAGAR PALIKA BUNGLOW NO 60 NEEMUCH MP NEEMUCH MADHYA PRADESH 458441 INDIA | NEEMUCH | MADHYA PRADESH | 458441 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹40.5 L+₹49,043.09 (1.23%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹41.8 L+₹1.9 L (4.64%)Rejected-Finance H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹44.6 L+₹4.6 L (11.5%)Rejected-Finance PLOT NO 79 SIS PARK DICHAON ENCLAVE PP2914 NAJAFGARH SOUTH WEST DELHI NEW DELHI 110043 | WEST DELHI | DELHI | 110043 | L4 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹42.4 L
EMD Value
₹84,700
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
ADDN/ALTN BLDG NO. P-33 (KITCHEN FOR STUDENT OFFRS) OF IML NEW LOCATION UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANTT-10
2023_MES_592362_1
GE/DS-09/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE South Delhi Cantt
₹84,700
Yes
19 Jun 2023
29 Apr 2023
29 May 2023
29 Apr 2023
27 May 2023
13 May 2023
Amount
Surface dressing n.exc. 15 cm deep complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed.
Excavating over areas, exc 1.5 m and n exc 3 m in depth; for foundation, etc. and getting out etc in soft /loose soil. complete all as specified and as directed.
M&L for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions. Square, Rectangle or Polygon complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) in foundation, including rafts, footings, foundation beams, plinthbeams, bases for columns, etc, basement slab, under rimmed piles and mass concrete complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) beams, cantilevers, bressumers, lintel over 1.5 mt span complete all as specified and as directed.
M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) column, pillars, piers, posts and struts complete all as specified and as directed.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm Soft soil/loose soil complete all as specified and as directed.
M&L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
S&F TMT bars 10 mm dia and over, cut to length, bent to shape requied, including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specified and as directed.
S&F TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.
M&L for 10 mm thick cement plaster in C:M 1:6 finished even and smooth above dado/ skirting complete all as specified and as directed.
M&L for 15 mm thick cement plaster in C:M 1:4 finished even and smooth above dado/ skirting complete all as specified and as directed.
M&L for 5 mm thick rendering in CM (1:3) over soffit and sides of RCC column, slab, landing , waist slab, chajja, roof projection etc. complete all as specified and as directed.
M&L for two coats of Distempering to walls surfaces with distemper oil emulsion including Priming plastered surfaces with alkali resistant priming paint etc. complete all as specified and as directed.
M&L for two coats of Distempering to ceiling surfaces with distemper oil emulsion including Priming plastered surfaces with alkali resistant priming paint etc. complete all as specified and as directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors, skirting etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and as directed.
M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match of size 450mmX 350mm complete all as specified and as directed.
M&L for glazed coloured, joint free ceramic tiles in vertical surface of size 450X300X7 mm thick, laid over and including 10mm thick cement plaster in CM 1:4 as in backing, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 20mm thick screed bed in CM 1:6 including grinding and polishing complete all as specified and as directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all as specified and as directed.
M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) for plinth protection etc. complete all as specified and as directed.
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
S&F powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F 100 mm size butt hinges medium weight stainless steel complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section and fixed complete all as specified and as directed.
S&F aluminium handles , 150 mm size, Fabricated type complete all as specified and as directed.
S&F powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Notes:- (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.
S&F Aluminium anodised door with shutter , chowkats /frame made with Aluminium section of size 100 x 44 x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2 mm thick and top / middle / bottom rail of shutter with sections 112 x 44 x 2mm thick including 5 mm thick tinted glass panes/ 12mm partical board as per directed by Engr-in-Charge, inserted including necessary fixing arrangement, jointing cleats, glazing clips, rubber packing aluminium anodised beading screw sets floor hinges tower bolts 200 mm size, mortice lock 100 mm size 4 lever, round handles etc., fitted to shutter and frames fixed in positon including hold fast of size 25 x 3 mm flat, 150 mm long , 6 nos in each frame including cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing surfaces complete all as specified and as directed.
S&F Vitreous China, semi-pedestal pattern (Anglo-Indian) Type including flushing pipe and socket of W.C. pan with seat cover including fixing of flush pipe etc complete all as specified and as directed.
S&F low level flushing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve complete all as specified and as directed.
S&F chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour complete all as specified and as directed.
S&F Vitreous Cliina wash basin, white, flat back of size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc. complete all as specified and as directed.
S&F Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F 15 mm bore, Wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F two way angle bib cock cromium plated fancy type 15 mm bore/size complete all as specified and as directed. Make : Johnson or equivalent
S&F 15 mm brass angle stop valves (fancy type), cast copper alloy, chromium palted, screwed down high pressure witg crutch and butter fly handles, screwed with iron pipes or for union complete all as specified and as directed.
S&F CP wall mixer 3-in-1 with wall flange complete with all fittings complete all as specified and as directed.
S&F Soap dish, chromium plated any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
M&L PVC 75mm floor trap, with grating including jointing solvent cement complete all as specified and as directed.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20 mm dia pipe complete all as specified and as directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm dia pipe complete all as specified and as directed.
S&Fgalvanised,with all fitting and fixed complete to walls and ceilings or laid in floors medium grade 20 mm dia pipe complete all as specified and as directed.
S&Fgalvanised,with all fitting and fixed complete to walls and ceilings or laid in floors medium grade 15 mm dia pipe complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for WC outlet pipe of 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for bath outlet pipe of 75 mm dia complete all as specified and as directed.
S&F Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of 1000 ltrs tank complete all as specified and as directed.
M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and as directed.
M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately.
M&L for Water Proofing compound complete all as specified and as directed.
M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-
(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.
(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).
(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.
(d) Preperation of surfaces and applying to coats of aluminium paint on top of roof surfaces.
Make of APP: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.
Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.
M&L SS Sink Grade-304 of size- 500x450x300mm and1.62mm thick complete all as specified and as directed.
M&L for 18 mm thick wood plastic composites (WPC) board, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc. complete all as specified and as directed. Notes :- (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra. (c) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall be included for the same.
S&F CP clip on hinges (Inset) complete all as specified and as directed.
S&F 125mm SS handle, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete all as specified and as directed.
S&F Magnetic catcher for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.
S&F stainless steel telescopic channel of size300mm to 500mm long complete all as specified and as directed.
S&F stainless steel Thali/Crockery basket of size 550 x 600x 200mm Grade-340 complete all as specified and as directed.
S&F Continuous (piano) hinges width of flip 30mm, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and as directed. (Area of the sub structure in contact with backfill to be measured)
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for Glossy finished pre-polished coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 grade with grey cement and pigments complete all as specified and as directed.
M&L for providing precast cement concrete solid building blocks or slabs exc 10cm thick Type B-1, 1:2:4 (20mm graded aggregates) (with plain or interlocking joints as directed) set in CM 1:4 complete all as specified and as directed.
Excavation in trenches n,exc 1.5m wide and 1.5m deep for fdn of manhole and getting out in soft/loose complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 as in foundation and mass concrete complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150mm bore complete all as specified and as directed.
M&L for PCC 1:2:4, type B-1 as in coping, surface channels, benchings, etc. of manholes finished fair and even complete all as specified and as directed.
M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork complete all as specified and as directed.
S&F TMT bars 6 to 8mm dia, cut to length, bend to shape reqd incl cranking and binding with mild steel wire (annealed) not less than 0.9mm dia or secur complete all as specified and as directed.
M&L for 150mm dia CI pipe (sand cast) in any length with (or) without ears, laid in trenches and jointed in CM 1:1 complete all as specified and as directed.
M&L for Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped complete all as specified and as directed.
S&F MS work such as rungs, handles to manholes, etc. complete all as specified and as directed.
Supply, laying & Testing galvanised steel tube (GI Medium grade) of Size 25 mm bore with screwed socket joints together with all fittings such as bends, elbows, tees, short pieces, conectors, caps, plugs and unions and fixedto walls and ceillings or laid in floors etc. complete all as specified and as directed.
Supply and fix Gun Metal gate Valve cast copper alloy screwed pressure with crutch & beautiful handle 25mm dia complete all as specified and as directed.
M&L for cutting existing 50/80mm dia GI pipe and taking water main connection of size 25 mm including all fittings such as union, socket etc making leakage proof joints complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 50 sqmm, 3.5 core complete all as specified and as directed.
S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA in existing panel complete all as specified and as directed.
Supplying and laying reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and as directed.
Supply & Laying of GI pipe light grade 50 mm dia for passing of U/G cable through road/hardstanding/pole/wall/floor etc. complete all as specified and as directed.
M&L for point wiring complete, standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including suitable concealed PVC conduit medium grade and sunk in pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer complete with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed.
All as per Srl item No.99 above, but One light /Fan/Bell point/Security light controlled by one way switch.
All as per Srl item No.99 above, but One 3 pin socket outlet 5 amps point independent board
All as per Srl Item No.99 above, but for one socket outlet 15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.
All as per Srl Item No.99 above, but for one socket outlet 15 Amps on Independent board with cables 4 sqmm size for phase and neutral and 4 Sqmm for earthing complete.
S&F switch piano flush type 5/6 Amp complete one way single pole complete all as specified and as directed.
S&F socket outlet 5 pin 5/6 Amp complete two in one complete all as specified and as directed.
S&F switch piano flush type 15 Amp complete all as specified and as directed.
S&F socket outlet 2 in 1, 5 pin 15/5 Amp complete all as specified and as directed.
S&F single pole and neutral metal clad sheet steel enclosures with 2 pin and earth plug and socket with one no MCB SP 20 Amps complete all as specified and as directed.
S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and as directed.
S&F wall mounted LED Integrated Batten T5 18/20 Watt - 4Ft White, indoor decorative PVC extruded complete all as specified and as directed.
S&F battan holder PVC insulated body complete all as specified and as directed.
S&F LED lamp 12 Watt LED Bulb complete all as specified and as directed.
S&F fan regulator electronic, stepped type, Switch type, suitable for ceiling fan 1200 mm sweep complete all as specified and as directed.
S&F BLDC (Bruishless Direct Current) ceiling fan of 1200 mm sweep not less than 350 RPM not less than Air Delivery 215 cfm voltage 220V high air flow with silence operation having full copper motor & ribbed 3 Nos A/M blades suitable for working on fan regulator. the BLDC motor fan shall have 100% rust free blade. the fan shall have BEE 5 star rating and compliant with IS-374 and making necessary electric connection of suitable PVC copper wire ceiling rose to ceiling fan complete all as specified and as directed.
S&F 10 Watt LED bulk head fitting in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified and as directed.
S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
M&L for opening of hole through out the wall as suitable for exhaust fan of size 450mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan complete all as specified and as directed.
S&F metal body exhaust fan 450 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with complete all as specified and as directed.
S&F Hot Water Storage (Geyser) 50 Ltrs Capacity, BEE 5 Star Rated, and connecting up the geyser with replacement of cable three core cable of size 2.50 Sqmm by means of plug top 20 Amps complete all as specified and as directed.
S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and as directed.
S&F sheet metal enclosure MCCB DB IP 43 double door bus bar neutral link earth bar and din rail VTPN 4 way complete all as specified and as directed.
S&F distribution board MCCB 125 Amps, 4 Pole, 415 Volts with 25 kA including electrical connection with bus bar or incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and as directed.
S&F MCB DB SPN 8 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 200 Anos rated bus bar complete all as specified and as directed.
M&L for MCB SPN 'C' curve 40 to 63 Amps 240 Volts , 10 KA complete all as specified and as directed.
M&L MCB SP 'C' curve 40 Amps 240 Volts complete all as specified and as directed.
M&L MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and as directed.
S&F electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed.
M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified and as directed.
M&L for submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn PVC conceiled conduit of size 25mm dia with complete all as specified and as directed.
S&F Electrical Chimney commericial type S.S Exhaust hood with filter dimension 6.6 x 3.5 mtr (5400mm x 1350mm x 50mm) alongwith 3 Nos (Three) low HT burner range dimension 30"x30"x24" comprising of following specifications complete all as specified and as directed :- (i) All top 34 Grade, 16 SWG food grade SS Sheet. (ii) Undershelf 18 SWG, 202 Grade SS Sheet. (iii) Covering 20 SWG, 202 Grade SS Sheet. (iv) Exhaust hood 20 SWG, 202 Grade SS Sheet. (v) Frame Work MS Angle - 38 x38 x 3mm (vi) Legs :- SS Square pipe 38 x 38 & 25 x 5 mm cross bracing. (vii) Adjustable Nylon bullet feet. Make : A. V. Kitchens India, Inalsa, Glen, Hindware or Kaff.
MAA BHAWANI CONSTRUCTION
P R Constructions
M/S Parmod Johar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .