Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Tenderer | |
| 2 | L2₹8.4 L+₹3.3 L (63.3%)Rejected-Finance RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance Not Lowest Tenderer | |
| 3 | L3₹8.6 L+₹3.5 L (67.5%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Tenderer | |
| 4 | L4₹8.8 L+₹3.6 L (70.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Tenderer | |
| 5 | L5₹9.9 L+₹4.7 L (91.0%)Rejected-Finance 13 218 MASJID EXTEN SADAR BAZAR | L5 | Rejected-Finance Not Lowest Tenderer |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt 10
Garrison Engineer South Delhi Cantt 110010
Periodical services in CAMS, 12 GASL, DGIS, IML, WARDEC and 1 CBPO under AGE B/R-I (S) of GE (South) Delhi Cantt-10
2022_MES_536032_1
GE/DS-46/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE South Delhi Cantt
₹52,000
Yes
26 Sept 2022
6 Jul 2022
5 Aug 2022
6 Jul 2022
3 Aug 2022
20 Jul 2022
Amount
Notes for BoQ :- The rate quoted by the tenderers shall inclusive of the provision as mentioned under Note Ser No. (i) to (vii) here-in-after. The tenderers are advised to keep in mind these provisions while quoting their rates:- 1. The tenderer has to bring the consumable material which loose their identity like synthetic enamel paint, OBD, cement base paint, plastic emulsion paint, lime, exterior emulsion paint, etc well in advance along with original purchase voucher as per sample approved by GE. These materials when brought by the tenderer, shall be checked by BOO as detailed by GE and shall be kept in custody of concerned JE and rep of contractor with double look arrangement in store room. The materials shall be issued on daily basis as per site requirement. A Pucca bound Register shall be maintained by the contractor showing total quantity in hand, quantity issued and quantity consumed in the particular quarter, which shall be initialled by both the Parties i.e JE and rep of contractor:-
(i) 25% of total reqd material as per CA provisions within 10 days from the date of commencement of work. (ii) 25% of the total reqd material as per CA provisions within 03 months from date of commencement of the work or earlier as per site requirement. (iii) 25% of the total reqd material as per CA provisions within 06 months from the date of commencement of the work or earlier as per site requirement. (iv) Balance 25% of the reqd material as per CA provisions within 02 months before the date of completion or earlier as per site requirement. (v) Engr-in-Charge/JE shall ensure the above provisions are followed before commencement of the work at site. (vi) All the house hold goods, belongings and window/doors will be covered by suitable polythine sheet before commencing the periodical work to prevent the dust and paint splaces. The quoted rates shall be demed to be included for the same. (vii) Every stage like preparation of surfaces, first coat, second coat/ final coat of finishes shall be got passed by Engineer-in-Charge.
M&L preparation of old decorated plastered or unplastered wall surfaces including pilasters and cornices etc including brooming down or steel wire brushing and applying one coat of white lime wash complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 2 above but two coats complete.
M&L preparation of old decorated plastered wall surfaces including pilasters and cornices etc including brooming down or steel wire brushing and applying one coat of oil emulsion distemper, white or tinted (colour & shade as approved by the GE) complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing surfaces of wall by mechanical grinder and preparing surfaces with necessary wall care putty and applying two coats of oil emulsion distemper, white or tinted (colour & shade as approved by the GE) over and including a coat of primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old decorated plastered / concrete ceiling surfaces including brooming down or steel wire brushing and applying one coat of white lime wash complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 6 above but two coats complete.
M&L preparation of old decorated wooden or wood based surfaces of any description not otherwise described, over 10 cm width or girth, and applying one coat of synthetic enamel paint (1st Quality) white or tinted (Colour & shade as approved by the GE) complete all as specified and directed by Engr-in-Charge.
M&L preparation of old decorated steel surfaces of any description not otherwise described, over 10 cm width or girth, and applying one coat of synthetic enamel paint (Ist Quality) white or tinted (colour & shade as approved by GE) complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick/concrete surfaces including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge.
M&L for 15 mm thick rendering with Readymix plaster (as per manufacturer's instructions) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra cement on wall and ceiling of up to four storied bldg complete all as specified and directed by Engr-in-Charge. Notes :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.
M&L for 5 mm thick rendering with Readymix plaster (as per manufacturer's instructions) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra cement on wall and ceiling of up to four storied bldg complete all as specified and directed by Engr-in-Charge. Notes :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.
M&L for preparation of newly plastered surfaces of wall applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of ceiling applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exec 0.5 sqm each pane complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 18 above, but frosted glass pin headed type complete.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
HANUMAN BUILDERS
M/S.M.S.Devi.Const.Co
M/S S.S. ENTERPRISES
verma enterprises
SABHARWAL CONSTRUCTION CO.
P R Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .