NIT 06 (22-23) Item-9

Wiring for lightpoint /fanpoint /exhaust fan point /callbell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C (As per DJB SOR (E&M 2022), 31.10.3)

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (As per DJB SOR (E&M 2022), 31.14) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (As per DJB SOR (E&M 2022), 31.14.1)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (As per DJB SOR (E&M 2022), 31.14.2)

2 X 4 sq. mm + 1 X 4 sq. mm earth wire (As per DJB SOR (E&M 2022), 31.14.3)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch (As per DJB SOR (E&M 2022), 31.24.1)

15/16 A switch (As per DJB SOR (E&M 2022), 31.24.3)

3 pin 5/6 A socket outlet (As per DJB SOR (E&M 2022), 31.24.4)

6 pin 15/16 A socket outlet (As per DJB SOR (E&M 2022), 31.24.5)

Bell push (As per DJB SOR (E&M 2022), 43.3.8)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (As per DJB SOR (E&M 2022), 31.25)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) (As per DJB SOR (E&M 2022), 31.28.2)

6 Module (200mmX75mm) (As per DJB SOR (E&M 2022), 31.28.4)

8 Module (125mmX125mm) (As per DJB SOR (E&M 2022), 31.28.5)

12 Module (200mmX150mm) (As per DJB SOR (E&M 2022),31.28.6)

S/o 20-Watt Higher Wattage Decorative ultra slim Polycarbonate LED lighting fixture with high lumen output, environmentally friendly, energy efficient ready to use pack. (As per DJB SOR (E&M 2022), 19.2.1)

Supplying and fixing of 25 mm size of PVC Pipe along with accessories in surface /recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as require.DSR(2021-22)/ 31.20.2

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/wooden block including connections etc. as requiredDSR(2021-22)/ 31.33

Supplying and fixing of 6way Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without) MCB/RCCB/Isolator). DSR (2021-22)/ 32.4.3

Providing and fixing of 63A TP&N capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. DSR (2021-22)/ 32.1.2

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR (2021-22)/ 32.10 5 to 32 Amp Single Pole (DSR 2021-22)/32.10.1

5 to 32 Amp Double Pole (DSR 2021-22)/32.10.3

Supply of Exhaust Fan 300 mm sweep 230 Volt, 50Hz AC with guardand mounting arrangement in wall and accessories, fittings, supports as required at site. Make: Bajaj, havells, crompton, Phillips, any othermake approved by DJB. SOR 20.2.1

Installation of exhaust fan upto 450mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. DSR (2021-22)/ 31.50.1

Supply of Ceiling fans (1200mm sweep) 230volt 50hz upto 80watt power ratting as required at site. Make: Bajaj, Havells, Crompton any other make approved by DJB SOR 20.1.2

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up-to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.DSR(2021-22)/ 31.45

Supply and fix in extra conduit own rod of 20cm length GI pipe 15 mm dia. heavy gauge including painting etc. as required. (Note: More than 5cm lengths hall be rounded to the nearest 10 cm and 5 cm Or less shall be ignored) DSR (2021-22)/ 31.48

Supply of LED Surface Mounted 2x2ft 36watt to 40watt 230V 50Hz with diffuser Make: Bajaj/ havells /Crompton/Phillips/any other make approved by DJB SOR 19.9.2

Supply of Wall Fan 400mm sweep 230 Volt, 50Hz AC mounting arrangement in wall and accessories, fittings, supports as required at site. Make: Bajaj, Havells, Crompton, Phillips, any other make approved by DJB SOR 20.4.1

Installation, testing and commissioning of pre wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable and earthing etc. as required. DSR (2021-22)/ 31.41

Supply of 16 sq.mm 4 core aluminium conductor armoured cable as required at site.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade ofupto 35 sq. mm and up-to 95 sq. mm (clamped with 25x3mm MS flat clamp) of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. DSR (2021-22)/ 37.2.2

ztp corporation