SPECIAL REPAIR TO BLDG NO. P-06 AND P-07, P-08 AND P-09 AT WAR MEMORIAL COLONY CANTT KANPUR UNDER GE (I) RnD KANPUR

Amount

M&L for dismantling of PCC in any thickness including tar felt/polymeric membrane etc from roof complete all as specified and directed.

M&L for removal of demolished material out of defence land to a distance exceeding 1.50 KM but not exceeding 5.00 KM incl loading/ unloading and stacking at the destination complete all as specified and directed.

M&L for cleaning of tar felt from the roof surface by wire brushing, sweeping, cleaning and watering and applying a coat of cement slurry at the rate of 3Kg/Sqm on the roof surface complete all as specified and directed.

M&L for 5 mm thick bedding layer in CM 1:4 with WPC as per manufacturers instruction over 40 mm thick PCC 1:2:4 type-B1 nominal mix (using 20mm graded crushed stone aggregate) as in padding/levelling course over roof surface finished even & fair without using extra cement complete all as specified and directed. Note: Liquid type of WPC shall be measured & paid separately.

M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.60 Kg/Sqm with non wovenpolyster fibre as reinforcement on primed surface by torch application with side over laps & joints over laps etc. as per manufacturers instruction over and incl primer on entire surface @ 0.40 Kg/Sqm on dry surface including cleaning surfaces complete all as specified and directed.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry over roof, over and incl 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for demolition of Brick work built in cement mortar as in drains etc. complete all specified and directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

Complete all as per Ser No 8.00 here-in-before but except bricks. Note :- Old serviceable bricks obtained from demolition shall be reused.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified.

M&L for demolition of cement concrete in ground floor and paving n exe 15 cm thickness (below or above ground level) .

M&L for 75mm thick PCC (1:3:6) type C-2 as in plinth protection laid to slope incl 12mm x 50mm deep joint filled with mastic filling of bitumen 85/25 and sand in ratio 1:2 provided at a distance 3m c/c & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for PCC type B-1 (1:2:4) 20 mm graded Agg as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, neelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed as directed.

M&L for dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for 16-18mm thick Granite Stone Slab approved size single piece opened edge half rounded flooring in thread over and incl 15mm thick cement screed bed in cement mortar 1:6 and jointed with neat cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polishing, complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L Cement concrete 1:4:8 Type D2(using 40mm graded stone aggregate) in foundations, filling and mass concrete as in sub-bases floors and pavings finishing surfaces of concrete even and rough to receive the topping layer complete all as specified and directed

M&L for demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing the same from the premises complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in slabs, supported on walls, beams and columns in floor, roof, landing and in shelves for slab and the Chajjas etc. like complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

M&L for precast cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) and set in Cement Mortar (1:4) as in louvres and jallies, 50mm thick (measured solid) including all mouldings, necessary formworks and reinforcement and dismantling existing RCC jallies in any description all as specified and directed.

S&F mild 10 mm dia and over deformed TMT bars cut to length bent to shape required including cranking, bending spirally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips complete all as specified & directed.

Complete all as per Item No 21.00 herein-before but 6 to 8mm dia complete all as specified & directed.

M&L for form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) for rough finished concrete surface.

M&L for taking down old cement plaster from brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering (10+5) mm under coat 10mm thick and top layer 5mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4), surface finished even and fair without using extra cement mixed with WPC @ 200ml per bag of cement by using necessary for scaffolding complete all as specified and directed. Note: Liquid type of WPC shall be measured & paid separately under respective item.

M&L for rendering 10mm thick on fair faces of ceiling surfaces in cement mortar (1:3) including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and and applying two coats of oil bound distemper over 2mm thick wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Exterior Acrylic Emulsion Paint over a coat of exterior primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceilings and applying two coat oil bound distemper (of approved quality and tint) on wall over and including 2mm thick wall care putty complete all as specified & directed.

M&L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke, mass, efflorescent salt and oil and greasy spot etc. washing rubbing down distemper surfaces and applying two coats of oil bound distemper (of approved quality and tint) on wall over and including 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke, mass, efflorescent salt and oil and greasy spot etc. washing rubbing down and applying two coats of Exterior Acrylic Emulsion Paint over and including a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke, mass, efflorescent salt and oil and greasy spot etc. washing rubbing down and applying two coat OBD over 2mm thick wall care putty on celling complete all as specified and directed.

M&L for dismantling floor and Wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified

M&L for non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles 0.16 Sqm or more size, in floor of approved colour and design etc., set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified

M&L for glazed ceramic coloured tiles size 300x450x7mm thick or more size of approved colour and design set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified complete all as specified

M&L for Vitrified Ceramic tiles light/ colour shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm or more size in floors of approved colour, pattern and design etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified.

Complete all as per Item No. 36.00 here-in-before but in 10mm thick cement plaster 1:3 in skirting complete all as specified & directed.

M&L for taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed.

M&L for taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqm but n exc 4 sqm in each complete all as specified & directed.

M&L for taking down shutter of any description, exc 1.00 sqm but n.exc 2.00 sqm each complete all as specified & directed.

M&L for mild steel work as in door chowkhat of angle iron including necessary cutting and welding conforming to Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed

S&F Second class hard wood Plain, solid, straight as in chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. Note: Each shutter 4 Nos & 125mm long hinges to be provided.

S&F 35mm thick factory made 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified & directed. Note: Each shutter 4 Nos & 125mm long hinges to be provided.

S&F in repair 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-work, complete all as specified and directed .

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory Made Solid PVC Moulded Door Shutter 28-30mm thick (styles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification and drawing.

S&F 125mm size Stainless Steel of grade 304 butt hinges medium weight cold rolled complete all as specified & directed.

S&F 40mm Continuous (piano) hinges, Mild steel bright finish or electrogalvanized complete all as specified & directed.

S&F 125mm long extruded aluminium alloy handle fabricated type complete all as specified & directed.

S&F 150mm long extruded aluminium alloy handle fabricated type complete all as specified & directed.

S&F 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S&F hasp & staple, aluminium 100mm size complete all as specified and directed.

S&F magic eye (door sight viewer) for doors complete all as specified and directed.

S&F floor door stopper of aluminium body & tongue over all length 140mm aluminium with hard drawn steel spring complete all as specified & directed.

S&F in repairs 150mm ,mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M&L for small fitting such as door and window stops article n exc 200 cu cm each in 2nd class hard wood incl 50 mm MS butt hinges medium weight complete all as specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165mild steel work as in holdfasts, knee piece and similar small article confirming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections 50mm x 25mm and 1.5mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified & directed. Note: Size of panel to be followed Drg No. TD/AR/146/2017.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 4mm thick Sheet glass ordinary quality & glazing with snap beading & rubber packing in square not exc. 0.5 sqm in each pane Complete all as specified & directed.

S&F 4mm thick figured glass pinheaded type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .

M&L for Preparation of new wood surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces and applying Two coat of synthetic enamel paint over red oxide primer of any description not otherwise described over 10cm width or girth complete all as specified and directed

M&L for preparation of old painted wooden surfaces and applying two coat of synthetic enamel paint of any description not otherwise described over 10cm width or girth complete all as specified and directed

M&L for taking up or down 15mm bore dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed

M&L for taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed

S&F 15mm bore dia galvanized iron water tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified & directed.

S&F 20mm bore dia galvanized iron water tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified & directed.

M&L for cutting chases, pinning in , for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth.

S&F in repairs 15mm bore bib tap cast copper chromium plated fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule all as specified.

S&F in repair 15 mm dia wall mixer for bathroom, cast copper chromium plated brass fancy type Single Lever with crutch or butterfly handle heavy duty with all connection slieves, capstan head, screwed down complete all as specified & directed.

S&F in repair 15 mm dia sink mixer for hot and cold water for sink, chromium plated brass fancy type with all connection slieves, capstan head, screwed down complete all as specified & directed.

S&F in repair 15 mm bore swan neck wash basin mixer for hot and cold water brass Single Lever heavy duty, CP for wash hand basin complete all as specified and directed.

S&F in repairs, 15mm bore angle valve brass chromium plated, fancy type complete all as specified and directed.

S&F in repair brass, CP gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified & directed.

S&F in repairs, vitreous china wash hand basin, white, flat, back size 550x 400mm, incl cutting for and pinning in ends of brackets or erecting stand, including 32mm dia CP Waste coupling , waste down pipe complete all as specified & directed.

S&F in repairs vitreous chinaware wash down water closet pan Pedestal pattern white including fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc with seat cover complete all as specified and directed.

S&F in repair vitreous china water closet “Orissa pattern” of size 580 x 440mm pan with 'P' or 'S' trap front or back inlet, foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs PVC valve less symphonic action dual type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve and float including brackets and flush pipe of polytheleneof low or high density 32mm dia for low level cistern complete all as specified and directed. .

S&F in repair sink with drainage board made of stainless steel grade 304 1 mm thick kitchen or laboratory with lugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm, bowl size 410mm x 330mm x 160mm complete including CP waste coupling and waste pipe complete all as specified and directed.

S&F in repair PVC connection 375mm long, 15mm size with PTMT nuts complete all as specified & directed.

S&F in repair towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and as directed.

S&F in repair kitchen plate rack made of stainless steel of grade 304 1 mm thick of size 900 x600x250 mm, complete all as per specified and as directed .

S&F in repair PVC cabinet mirror size 450mm x 300mm of approved make as approved by GE.

S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard & railing 60 cm long, complete all as specified & directed.

S&F in repair toilet paper holder of of brass, chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified & directed.

S&F in repair chromium plated brass body Shower Rose with Arm including fixing to steel pipe or union complete all as specified & directed.

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.

S&F in repair Soap Dish, vitreous china white, approximate size 160mm x 160mm x 90mm complete all as specified & directed.

S&F in repair Hand Shower (health faucet) brass chromium plated with 8mm dia 1mtr long flexible tube and wall hook chromium plated complete all as specified & directed.

S&F in repair aluminium body peg set of six complete all as specified & directed.

M&L for dismantling of PVC water tanks exc 250 litres and n.exc 500 litres capacity of any condition or type complete all as specified and directed.

S&F 500 Ltr capacity rotational moulded polyethylene water storage tank Triple layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified.

S&F Ball brass 20mm bore valve, high pressure, with polyethylene float & fly nut complete, screwed for iron pipe or brass ferrule and fixed.

M&L for Demolition and breaking up drain pipe 150mm of any type and size, set in cement mortar, in foul position complete all as specified and directed.

S&F 110mm PVC (SWR) pipes grade-B 6 Kg/Cm2 pressure rating ISI marked single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius ISI marked complete all as specified and directed.

S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, ISI marked complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ISI marked complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement ISI marked complete all as specified and directed.

S&F PVC bend (any radius) diminishing pieces or tapers (larger bore measured) 75 mm bore complete all as specified & directed.

S&F PVC vent cowl 110 mm bore ISI marked complete all as specified & directed.

S&F in repair 25mm stainless steel curtain rod for Door, Window with fancy type bracket and end cap (Latto) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of approved colour and profile having tensile strength of 550 Mpa as in roof covering/chajjas covering, cladding to wall fixed with self tapping screws incl cutting of chase in wall and inserting 50 mm deep, and making good and matching the surface with existing finish, complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165 (Brackets over 10 kg each to be measured under ‘Structural Steel') incl cutting holes and making good with CM 1:3 and PCC 1:2:4 type B0 for fixing of brackets and matching with existing finish complete all as specified and directed.

Supply only integral water proofing compound (Liquid) (ISI Marked).

M&L for dismantling Loose/ disintegrated portion of RCC Chajjas, Bands, Shelves, beams fin facia, roof projection and similar works incl provision of supports if required and dubbing with PCC (1:1.5:3) using 6 to 12mm graded stone aggregate in any position of 15mm to 50mm thick incl necessary form work if required and finishing to desired shape incl taking down old rusted reinforcement and providing new reinforcement by welding/ drilling and rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound @2% by weight of cement finished surface fair and even without using extra cement by using scaffolding upto the height of 12mtr complete all as specified and directed

M&L for cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 110 mm bore drain pipe complete all as specified & directed.

M&L for dismantling boarding, any description, fixed in any position with nail complete all as specified & directed.

S&F kitchen cabinet shutter with frame & top cabinet made out of foam profile with homogeneous fine cellular structure having smooth outlet integral skin having 45 mm width & 20 mm thickness as vertical & horizontal stiles, joints are made and shall be fixed to wall using required size sheet metal screws and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35 mm x 17 mm (Profile FP3517). The panel shall be filled with accucell plank profile of size 250 mm width and 6 mm thick (Profile-FP25006). All partition/shelves made out of 18 mm thick PVC Celuka/WPC sheet 600 density plain colour or wherever required of marble 25 mm thick comprising of following items for complete set to work as under:- (i) Alloy steel hinges zinc coated zero degree or eight degree. (ii) Alloy steel handles fancy type 8"/10" long bright finished chromium plated steel of approved shape, design fixed with chromium coated screw on the kitchen cabinet shutter. (iii) S&F for 20 inches drawer runners folding type with guide channels with appropriate ball bearing /rollers etc. complete. (iv) Supply only for stainless steel multi purpose/Thali basket of size 525x508x200 mm for kitchen complete-01 No (v) Supply only for stainless steel cup & saucer basket of size 525x508x100 mm for kitchen complete-01 No (vi) Supply only for stainless steel perforated cutlery basket of size 525m508m100 mm for kitchen complete-01 Nos (vii) S&F stainless Steel basket of size 505x150x432 mm (pull out) 2 shelf with side sliding roller clip over and including stainless steel channel on both side fixed complete -01 No. (viii) S&F stainless steel basket of size 505x150x533 mm (pull out) 3 shelves complete for kitchen-01 No The above items detailed above are for one kitchen complete and measured from front of shutter length & width.( Total Kitchen =04 Nos)

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces of walls in CM (1:6) surface finished even and fair without extra cement all as specified and directed.

M&L for disconnecting existing tanks exc 250 ltr but not exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

M&L for point wiring for one light point/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metallic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one modular switch including MS modular box & plastic sheet cover plate suitable as per require module size including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

Complete all as per srl item No 118.00 here-in-before but upto ceiling height and on surface at ceiling.

Complete all as per srl item No 118.00 here-in-before but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit.

Complete all as per srl item No 118.00 here-in-before but for one 3 pin 5A socket outlet independent controlled by one switch.

complete all as per srl item No 118.00 above but for one 5A socket outlet on the same board controlled by one switch.

M&L for switch modular type single pole one way 1 module 6 amps 240 volts ISI marked complete all as specified & directed.

S&F switch modular type one way 1 module 16 amps 230 Volts complete all as specified & directed.

M&L for socket 6 amps modular type 2/3 pin combined 2 module , 230 volts complete all as specified & directed.

M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified & directed.

S&F electronic fan regulator modular type one way 1 module 230 Volts complete all as specified & directed.

M&L for electric bell push modular type 1 module one way 6 amps 240 volts complete all as specified & directed.

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete all as specified & directed.

M&L for ceiling rose surface Bakelite 3 terminals as approved by GE complete all as specified & directed.

S&F in replacement of wall mounted LED light fittings 20 watt, 6500K, extruded Heat Sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified & directed.

S & F Lamp holder insulated body with back plate for dome batten fittings complete all as specified & directed.

S&F decorative wall light fixture made up of polycarbonate suitable for 9 watt retrofitted LES lamp complete all as specified & directed.

S&F in replacement of LED bulk head fitting with opal diffuser min 10 Watt, 6500 K, IP-65, with efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified & directed.

S&F in replacement of LED post top lantern 35/40 Watt white made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP-65 protection including fixing of GI pipe of suitable dia dia, 300 mm long or as per site requirement light grade, partly embedded on column of gate with fixing arrangement complete and making electrical connection complete all as specified & directed.

S&F in replacement of LED mirror light fitting min 10 Watt 300 mm long, with efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified & directed.

Supply and fix in replacement energy saving surface mounting Round shaped surface of as per site requirement premium LED luminaries 12/14 watt suitable for corridor made out of CRCA metal housing and PPMA diffuser for elegant look, complete all as specified & directed.

Supply and fix in replacement of High power LED Wall security light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as specified & directed.

M&L in replacement for sub main wiring with two single core PVC insulated flexible copper conductor multistranded cable (FR) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

Complete all as per srl item No 139.00 here-in-before but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit .

S & F distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incomer and MCB as outgoing 415 Volts 3 phase 50 C/s VTPN DB 4 way, complete with appropriate size copper bus bar and neutral link, complete with one MCCB 3 pole 415 Volts 160 Amps rating with rupturing cap 25 KA of the same make as of distribution board & with three phase (TP) MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified & directed.

Complete all as Item No. 142.00 here-in-before but size 4 way.

M&L for MCB single pole 240 volts 5 to 30 Amp 'C' Series, with rupturing capacity 10 KA having "C" curve characteristic using thimbles of required size complete all as specified & directed.

M&L MCB single pole & neutral 240 volts 30 to 63 Amp 'C' Series, with rupturing capacity 10 KA having "C" curve characteristic using thimbles of required size complete all as specified & directed.

M&L for single pole and neutral enclosure with a top pin, earth plug and socket complete with one SP MCB 25 Amp 'C' Series, 240 Volts complete all as specified & directed.

S&F PVC conduit by non metallic rigid PVC conduit, ISI marked, confirming to IS 9537, medium grade of size 25mm dia including all fitting like bends, elbow, reducer, junction box, Tee, Tee bell mouth all fixing accessories such as coupler lock, nuts, saddles, pipe hooks etc complete including cutting and chasing as required on brick wall n.exc 10 cm girth for concealed conduit wiring and making good to disturbed surface with cement mortar 1:3 and distemper/colour wall etc to match with existing surface including facing/finishing complete all as specified & directed.

Taking down of Ceiling/ exhaust fan from the existing location and cleaning by kerosene oil, painting, oiling and greasing then re-fixing at the same location

M&L for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade 15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:33:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-Charge and testing on completion.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or cheases or burried in ground or drown in conduit/ pipe or fixed to VTPN as required or directed by Engineer-in-Charge complete as specified.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out in soft/loose soil all as required for laying of cables, pipe line, foundation filling of poles or stays and for rerouting of cables complete all as specified & directed.

Returning filling, in including spreading ,levelling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified & directed.

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

M&L for drilling manually in soft / loose soil under road / hard standing / culvert / nala of suitable bore for protection cable & pipe upto 80 mm bore complete all as specified. Note: Depth of bore shall not be more than 1 Mtr from original ground level complete all as specified & directed.

Disconnecting electrical connection and taking out old unserviceable LT UG cables any type and any size all as specified and directed.

Supply and laying in trenches or fixing to wall or poles or passing through pipe, in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area 50 sqmm 3.5 core. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

M&L in replacement of for GI tubing light grade 50mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed.(clamps for fixing pipe, nuts, bolts washers shall be measured separately)

Disconnecting, dismantling and taking up or down old/unserviceable/cracked GI tubing with fittings of size 20mm bore incl cleaning for refixing complete all as specified and directed. Note: Excavation and earthwork will be measured and paid separately under relevant items.

Complete all as per Srl item No 160.00 here-in-before but of size 25 mm complete all as specified & directed.

Complete all as per Srl item No 160.00 here-in-before but of size 50 mm complete all as specified & directed.

Supply & Fixing of 50mm GI tube medium grade/ ISI marked complete with all fittings (such as bends, elbow, tees, connectors, caps, plugs, unions etc.) including cutting, screwing as required and fixed to wall or roof or laid on floor or in trenches including fixing wall hooks, cutting through wall, floors etc. and making good the disturbed surface complete all as specified & directed.

Complete all as per Srl item No. 163.00 here-in-before but of size 25mm GI tube medium grade complete all as specified & directed.

Complete all as per Srl item No. 163.00 here-in-before but of size 20mm GI tube medium grade complete all as specified & directed.

S&F gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe & fixed of size 50mm dia complete all as specified & directed.

SHYAMA CONSTRUCTION COMPANY (BID ID -3410337)

ARORA BROTHERS (BID ID -3420469)